- Custom Designed for the Sony ZVE-10 Camera Body
- Mount Accessories via 1/4"-20 Threads and a Cold Shoe Receiver on the Bottom Plate
- Accessible Design Maintains Easy Access to Camera Ports, Function Buttons, and Battery Compartment
- Highly Compatible with Accessories like Sony ECM-W2BT & Wireless Shooting Grip
- Lightweight Design Greatly Improves Functionality while Maintaining a Compact Form Factor

- Mount Accessories via Cold Shoe Receiver, NATO Rail, 3/8"-16 and 1/4"-20 Threads with Locating Points
- Custom Designed for the Nikon Z8 Camera Body
- Arca Ready via Compatible Bottom Plate Perfect for DJI Ronin and Compatible Tripods
- Security Threads Provide Multiple Points of Contact for Improved Security
- Cable Clamp Secures Cables in Place with Convenient Thumb Screw Design

Designed for Tiltaing camera cages, the Left-Side Advanced Focus Handle, allows you to connect to the optional Nucleus Nano motor to control focus via a built-in finger wheel. It also features a record button for triggering record on/off over an optional Tilta R/S cable connection to compatible cameras. Multiple R/S cables are available, depending on your camera.

The handle attaches to the left side of your Tiltaing cage using your choice of an optional dedicated Left Side Handle Adapter—the Type IV, V, or VI version. Each of these attachment adapters use a different mount type, such as rosette or NATA rail.

The handle accepts a Sony F570 battery, sold separately. An included USB cable connects the handle to your Nucleus Nano motor to power it off the F570 battery and to allow finger-wheel focus control.

There are two connections on the handle: an 8V regulated USB Type-C output (where the USB cable plugs in) and 12 VDC output.

This support bracket helps to fully stabilize and secure your camera when mounted on the Gravity G1, G2, or G2X by attaching from the tilt arm of the gimbal to the hot shoe mount of your camera.

For Hydra Alien Mini, compatible with DJI Osmo Pocket 3

Kamerautstyr, skulderstøtte

Tilta MB-T16-B kameramonteringstilbehør

Tilta TT-C07 kameramonteringstilbehør Svalehaleplate

For the Khronos iPhone 15 Pro / Pro Max Case

For iPhone 15 Pro and Pro Max Smartphones

The Quick Release Baseplate for Canon C500 Mk II/C300 Mk III connects to your camera via 1/4″-20 and 3/8″-16 tie down screws and features a non-slip, cushioned shoulder pad designed to be comfortable and secure.

The dual rosettes on each side of the baseplate allows users to quickly mount extension arms for better handheld support while the lens adapter support allows you to attach various lens mount adapters via a 1/4″-20 screw.

Front and back 15mm LWS rod supports allows you to easily mount accessories both in front of and behind the shoulder pad.

The baseplate’s VCT locking extension and locking toggle allows you to choose between mounting the baseplate to either a standard VCT plate or a Tilta standard dovetail plate.

- Custom Designed for the Sony Burano 8K Digital Cinema Camera
- Mounting Points Include Arri Standard Rosettes, 1/4"-20 and 3/8"-16 Threads, Both with Locating Points
- Battery Plate Supports Gold or V-Mount Batteries and Features Expanded Power Output Options
- 15mm Baseplate Supports 15mm LWS Rods and Accessories like Matte Boxes and Follow Focus Systems
- EVF Bracket Offers Greater Flexibility for Tilting and Rotating the Camera's EVF

This camera cage provides protective armor for the RED Komodo camera. It provides several 1/4”-20 and 3/8”-16 mounting points for mounting accessories. It also includes two rosettes on each side as well as a cold shoe mount on top. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle, adjustable quick release top handle, and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the RED Komodo camera cage will help to fully build out your setup. It includes: the base RED Komodo cage, right side wooden handle, quick release top handle, Arca and Manfrotto quick release baseplates, 15mm LWS baseplate, an Adjustable Cold Shoe Accessory Mounting Bracket, and finally a Dual Canon BP to V Mount Adapter Battery Plate to allow for a longer battery life for your camera.

This Battery Plate serves as a replacement for the one included in the Power Supply Module for DJI Transmission.

This plate can be installed onto the DJI Video Transmitter or Receiver and allows you to mount a V-Mount battery to the unit.

This can provide power as well as pass power through the module to the camera body when used with the other plate from the original kit. (not included)

This is a fantastic option for those who are looking for a clean and convenient way to mount and power the DJI Transmission System.

NOTE: These Plate can only mount to the transmitter in one configuration which will position the SDI ports on the Operators side and the LCD Screen/Control Knob on the Assistant’s side.

For the Khronos iPhone 15 Pro / Pro Max Case

TILTA Nucleus-M 7-7Pin Motor to Motor Conn. Cable 18cm

TILTA Nucleus-M 7-7Pin Motor to Motor Conn. Cable 55cm

TILTA Wooden Handle 2.0 Arri Alexa Mini R/S Ca nc Nucleus-m

Tilta MB-T16-SCF camera filter tilbehør

Tilta TA-AMB-B kameramonteringstilbehør

Tilta MB-T15-72 camera filter tilbehør Filterholder-adapterring

Tilta RS-TA-RD1 videostabilisatortilbehør Kontrollkabel Svart Kopper, Rustfritt stål 1 stykker RED Camera

This handle powers from a Sony L-Series Battery (F550/570) and can send power to the Nucleus Nano II Hand Wheel for extended battery life. (battery not included)

This handle also allows users to power accessories via the integrated USB-C and DC power outputs.

The handle features a 1/4″-20 thread with locating points, perfect for mounting our Right Angle Rosette Adapter in order to easily integrate this handle into a shoulder rig setup.

The top of the handle also features a cold shoe receiver, which can be used with our optional Cold Shoe Mount for an external monitor in order to create the perfect focus pulling station when used with the Hand Wheel.

NOTE: The NATO Mount is only intended for the Nano II Hand Wheel. Do not connect other accessories via this NATO mount or you will risk damaging the contact pins.

TILTA recommend using only Sony L-Series F550 Batteries. Compatibility with other brands is not guaranteed.

Tilta TA-T23-A-B kamerabur 1/4" Svart

This adjustable arm for the Tiltaing Mini Follow Focus attaches directly to the body of the follow focus to allow you to attach it to a 15mm rod. The section of the arm where it attaches to the follow focus body can be swiveled back and forth so that you can easily adjust the follow focus to properly fit onto various lenses.
For lenses with different pitch gears, we will offer a variety of focus gear attachments.