Stylish and simple design and a high level of protection are synonymous with the new FlexAir Hybrid Magsafe case from the Tech-Protect brand.
The cover uses high-quality TPU and PC components. The flexible TPU frame will perfectly protect against shocks and falls, while the hard polycarbonate back will protect your phone from scratches.

The classic, transparent finish will ensure the unique look of your smartphone.
The slightly raised form of the case around the camera and screen protects against damage, lifting the phone just above a flat surface.

The case is equipped with a ring compatible with MagSafe wireless technology.
The magnetic ring will ensure maximum charging performance and a quick and easy connection to all MagSafe accessories.

Tech-Protect MM15W-V1 is a combination of a comfortable car mount and a super-fast wireless charger supporting MagSafe technology with a maximum power of 15W.

Strong magnets will automatically adjust your phone to the holder, keeping it in a stable and secure position while riding even in difficult conditions. Convenient and easy to use, it allows you to use your smartphone in both vertical and horizontal positions.
The high quality of ABS and PC components is a guarantee of long-term use.

Hooked mounting hook, gives the possibility of attaching to any grille in the car.

* MagSafe magnetic only works directly with your phone or on a case with a built-in MagSafe magnetic eye.

The Tech-Protect Magslim Magsafe case is an elegant and stylish solution for users who value modern design and functionality. Made of high-quality materials, it is super light and thin, perfectly fitting the shape of your phone while providing effective protection.

The uniqueness of this case is underlined by its MagSafe compatibility, making it compatible with a wide range of MagSafe accessories, such as chargers and magnetic mounts.

The hard back and aluminum frame provide solid protection, and the additional lens protection protects the camera from scratches and damage.
The subtle, transparent finish and minimalist design make the case fit perfectly with any styling, adding a modern look to the smartphone.

Stylish and simple design and a high level of protection are synonymous with the new MagCam case from the Tech-Protect brand. High-quality TPU and PC components were used to produce the cover. The flexible frame made of polyurethane will perfectly protect against shocks and falls, while the hard polycarbonate back will protect your phone from scratches.

The built-in magnetic ring, compatible with MagSafe accessories, gives you the ability to wirelessly recharge your energy without having to remove the case from your phone. Now you can use charging anytime, anywhere, without any obstacles.

The transparent finish and metal buttons will ensure a unique look of your phone.
The case is equipped with a camera cover, with precisely made cutouts for the camera, lamp and sensors.

The Tech-Protect Nylonmag strap is an elegant and functional accessory designed specifically for smartwatches. Made of high-quality, braided nylon, it provides durability and wearing comfort. Lightweight and breathable, making it ideal for everyday use as well as intense workouts.

A characteristic element is the metal fastening, thanks to this mechanism, the strap can be easily and quickly adjusted to the wrist, ensuring a secure and secure attachment.

Its modern design blends perfectly with the aesthetics of modern smartwatches, emphasizing their elegant appearance and adding a unique character.

The band is compatible with Apple Watch models (44 / 45 / 46 / 49 mm): 8 / 9 / 10 / 11, SE 1 / 2 / 3 series, Ultra 1 / 2 / 3 series.

A classic, one-piece Flexair Hybrid Magsafe case from Tech-Protect with a transparent finish, created to emphasize the lines and original silhouette of the device.
The hybrid design is a combination of a rigid polycarbonate back and a durable, flexible frame around it. The whole will provide excellent protection against scratches and damage, while maintaining a slim and light design.

The perfectly fitted case fits snugly to the device, increasing the comfort of its use, and precisely made notches do not limit the functionality - free access to buttons and ports. The slightly raised form of the case around the camera and screen will protect against scratches, lifting the phone just above a flat surface.

The case is equipped with a ring compatible with MagSafe wireless technology.
The magnetic ring will ensure maximum charging performance and a quick and easy connection to all MagSafe accessories.

The Tech-Protect Silicone case is the perfect solution to protect your headphones. The elastic case has been perfectly matched and made of high-quality, scratch-resistant silicone.

The case is the epitome of minimalist design, while maintaining adequate protection of the device against scratches or falls.

A practical silicone lanyard has been implemented in the case to increase the range of possibilities - the headphones can be attached, for example, to keys, a bag or a backpack, making it almost impossible to fall or lose the set.

The Tech-Protect Nylonmag strap is an elegant and functional accessory designed specifically for smartwatches. Made of high-quality, braided nylon, it provides durability and wearing comfort. Lightweight and breathable, making it ideal for everyday use as well as intense workouts.

A characteristic element is the metal fastening, thanks to this mechanism, the strap can be easily and quickly adjusted to the wrist, ensuring a secure and secure attachment.

Its modern design blends perfectly with the aesthetics of modern smartwatches, emphasizing their elegant appearance and adding a unique character.

The band is compatible with Apple Watch models (44 / 45 / 46 / 49 mm): 8 / 9 / 10 / 11, SE 1 / 2 / 3 series, Ultra 1 / 2 / 3 series.

Made of high-quality TPU material, the Tech-Protect Silicone Rope case is a stylish and functional solution for storing and protecting your headphones. The muted color gives it a sleek look, while the flexible design ensures a perfect fit for your device.

The case is equipped with a strong, drawstring strap, which makes it easy to carry and minimizes the risk of loss. This ensures that your headphones are always safe and easily accessible.

The Tech-Protect C2S CrossBody strap is an elegant and functional accessory that is perfect for everyday use.

Equipped with an adapter that we place on the inside of the case, it allows you to carry your phone safely and comfortably. Thanks to the adjustable length of the cord, we can hang the phone over our shoulder or carry it in our hand, adapting the way we use it to our needs.

The C2S can be used as a stylish phone lanyard, but it will also be great as an addition to keys or a backpack, adding a modern look to the whole.

*Two adapters are included.

The Tech-Protect Nylonmag strap is an elegant and functional accessory designed specifically for smartwatches. Made of high-quality, braided nylon, it provides durability and wearing comfort. Lightweight and breathable, making it ideal for everyday use as well as intense workouts.

A characteristic element is the metal fastening, thanks to this mechanism, the strap can be easily and quickly adjusted to the wrist, ensuring a secure and secure attachment.

Its modern design blends perfectly with the aesthetics of modern smartwatches, emphasizing their elegant appearance and adding a unique character.

The strap is compatible with Apple Watch models (40 / 41 / 42 mm): 8 / 9 / 10 / 11, SE Series 1 / 2 / 3.

The Tech-Protect Silicone Hook case is the perfect solution to protect your headphones. The elastic case has been perfectly matched and made of high-quality, scratch-resistant silicone.

The case is the epitome of minimalist design, while maintaining adequate protection of the device against scratches or falls.

In addition, the case is equipped with a practical carabiner that increases the range of possibilities of use - the headphones can be attached to a leash with keys or a loop in the pants, thanks to which falling or losing the set becomes almost impossible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

The Tech-Protect Silicone Hook case is the perfect solution to protect your headphones. The elastic case has been perfectly matched and made of high-quality, scratch-resistant silicone.

The case is the epitome of minimalist design, while maintaining adequate protection of the device against scratches or falls.

In addition, the case is equipped with a practical carabiner that increases the range of possibilities of use - the headphones can be attached to a leash with keys or a loop in the pants, thanks to which falling or losing the set becomes almost impossible.

Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum screen protection without compromise. The ultra-thin design with a thickness of only 0.28 mm makes it virtually invisible and at the same time extremely durable. With a ceramic coating with a hardness of 7H, it effectively protects against scratches and pressure, maintaining perfect clarity and full sensitivity to touch. The biggest advantage? It doesn't crack or crumble like traditional tempered glass!

Tech-Protect Glass Flex+ is the perfect solution for those who value complete safety without compromise.

INSTALLATION INSTRUCTION:
1. The installation of this glass model is different from traditional tempered glass glued to a thin adhesive layer. Due to the thicker layer of glue, the process is a bit more demanding and requires precision.
2. Clean the watch screen thoroughly. Use a damp cloth to remove any dirt and fingerprints. Then wipe the screen with a dry, soft cloth to completely remove moisture. Finally, use dust stickers to get rid of dust and dust particles.
3. Carefully remove the protective film from the adhesive layer. Precisely align the glass with the screen and gently place it.
4. If any of the edges do not adhere properly, it is likely that the glass has been glued unevenly. In this case, they should be peeled off and re-glued until the desired effect is achieved.
5. Remove air bubbles by gently pressing the glass from the center to the edges. Use your finger or a soft cloth to do this, pushing the air out.
6. Due to the specificity of glass production (polishing, milling), the fitting may require several minutes of work. After proper installation, the final result is aesthetic and durable.

The Tech-Protect Magmat case combines elegant design with the highest level of protection. The hybrid design uses high-quality TPU and PC components, guaranteeing comprehensive protection for your smartphone.

The flexible frame made of polyurethane plastic perfectly absorbs impacts and protects the phone during falls, while the hard polycarbonate back effectively protects against scratches and mechanical damage. The precision-fitting design provides perfect protection without unnecessary compromise.

The raised form of the housing around the camera and screen protects the most sensitive components from contact with a flat surface. Precise cutouts guarantee full access to all ports, buttons and speakers, without restricting any functionality of the device.

Tech-Protect FlexAir is the perfect combination of flexibility, durability and ergonomic design. The lightweight case made of durable TPU plastic effectively protects the device from scratches and minor damage, while maintaining the slim silhouette of the phone. The transparent design allows you to fully appreciate the original appearance of the smartphone without covering its design.

The case fits perfectly with the device, giving you full access to all external ports and features. The flexible material guarantees a secure grip, minimizing the risk of accidental falls. Raised edges around the screen and camera island protect the display and lenses from contact with flat surfaces.

FlexAir is the ideal solution for those who value comfort of use combined with reliable protection. Thanks to its anti-abrasion properties, the case will maintain an attractive appearance for a long time while protecting your equipment from everyday damage.

The Tech-Protect MagRack MagSafe case is a functional solution that combines solid protection with a practical stand. Made of durable TPU and polycarbonate plastic, it effectively protects the smartphone from shocks, falls and scratches, while maintaining a slim profile. The matte finish gives the case a sleek, professional feel.

The built-in retractable stand allows you to conveniently position your phone in a horizontal and vertical position, ideal for watching videos, video calls or browsing content. The sturdy construction of the foot provides stability, and after use, it easily retracts in the back of the case without increasing its dimensions. The built-in MagSafe magnetic ring ensures full compatibility with MagSafe accessories and allows you to charge wirelessly without having to remove the case.

Precision-engineered cutouts give you full access to all ports, and gently raised edges around the screen and camera protect against scratches when placing your phone on flat surfaces. Integrated button covers allow for comfortable operation while maintaining full functionality of the device.

Tech-Protect FlexAir is the perfect combination of flexibility, durability and ergonomic design. The lightweight case made of durable TPU plastic effectively protects the device from scratches and minor damage, while maintaining the slim silhouette of the phone. The transparent design allows you to fully appreciate the original appearance of the smartphone without covering its design.

The case fits perfectly with the device, giving you full access to all external ports and features. The flexible material guarantees a secure grip, minimizing the risk of accidental falls. Raised edges around the screen and camera island protect the display and lenses from contact with flat surfaces.

FlexAir is the ideal solution for those who value comfort of use combined with reliable protection. Thanks to its anti-abrasion properties, the case will maintain an attractive appearance for a long time while protecting your equipment from everyday damage.

The Lamano Tech-Protect MagSafe Case is a stylish accessory that combines elegance with character. Made of high-quality PC plastic, it effectively protects your phone from scratches and damage, while maintaining a slim and lightweight design.

The distinctive design gives the case a modern, predatory character – perfect for women who value fashion and individual style. It is not only protection, but also a fashionable accessory that attracts attention and emphasizes personality.

The raised bezel around the lens provides additional protection for the camera from chafing and accidental impacts, protecting the most sensitive component of the phone. The precise workmanship guarantees a perfect fit to the shape of the device, ensuring a comfortable grip and comfort of everyday use.

With full MagSafe compatibility, the case allows you to use magnetic accessories quickly and effortlessly without having to take them off. Easy assembly and disassembly make the Tech-Protect Lamano MagSafe a practical solution for those who value style and functionality – also a great choice as a gift.

Tech-Protect MagFlex is a functional case with a colorful bezel and transparent back that exposes the original beauty of your phone while providing extra protection. The slim design makes the phone fit easily in your pocket, and at the same time does not interfere with everyday use.

Equipped with a built-in magnetic ring compatible with MagSafe accessories. You can freely use magnetic mounts and MagSafe wallets in any situation. MagFlex also guarantees comprehensive protection for the camera in your phone – you don't have to worry about damage or scratches to the camera lens.

The precision-crafted design fits perfectly into your smartphone, giving you full access to all ports and buttons. The light and slim form makes the case comfortable for everyday use, protecting the phone from scratches and minor damage.

Skjerm- og linsebeskytter i herdet glass for DJI Osmo Action 6, Tech-Protect Glass Fit+ gir 9H hardhet, oleofobisk belegg, presist freste kanter og full berøringsfølsomhet.

Esken inneholder herdet glass for den store skjermen, den lille skjermen og linsen, samt monteringssett for å feste beskyttelsen på kameraet.

• Kompatibel med DJI Osmo Action 6
• 9H glasshardhet
• Oleofobisk belegg reduserer fingeravtrykk
• Krystallklarhet bevarer farger og bildeskarphet
• Sett inkluderer 6 glassdeler

Utviklet for å bidra til å beskytte viktige overflater samtidig som skjermen forblir klar, responsiv og enkel å rengjøre.

MagSafe-deksel til Apple iPhone 17 Pro / 18 Pro med slank tolagsdesign i TPU og polykarbonat, matt mørkeblå finish, hevede beskyttelseskanter og innebygd magnetring.

Tech-Protect BasicMag gir effektiv beskyttelse i hverdagen mot støt, fall og riper, samtidig som telefonen forblir lett og komfortabel å bruke.

• Hybrid TPU-ramme og hard PC-bakside
• Kompatibel med MagSafe-teknologi
• Støtter rask trådløs lading
• Matt finish bidrar til å redusere synlige fingeravtrykk
• Presise utskjæringer for porter, knapper og høyttalere

Et minimalistisk og praktisk deksel som beskytter telefonen samtidig som full tilgang til viktige funksjoner opprettholdes.