Wibe - wall bracket 11/75 - steel hot-dip galvanized

Console for wall duct complete V250-350K130-150The distance between consoles should be approx. 66mm. Using steel and alu wall duct can increase the distance to 100mm.The console can be adjusted to take into account that the wall is not fully vertical.The wall duct is fastened to the front of the console with self-drilling / self-tapping screws.Use type 13m / 2.68 - EL number 79.36.530.757

Corner 90 degrees for cable trays KB184 / KB284 height 60 mm, width 500 mm, length 600mm Galvanized

Heavy cable protectors with centre holes, there simplyfies the installation significantly. Every details of the cable protectors, has a surface treatment with Magnelis, which has a superior corrosivity protection, fitting the nordic clima, even in marine enviroments. It has a unique ability to self healing in drilled holes, weld seams and cut surfaces, smoother and finere surface structure, and last but not least, a markedly minor impact on the environment

End cap for installation duct LF40060 RAL9011

Trunking box for Fuga outlet for FB trunking series

STICK-ON BODY JOINT - FOR SNAP-ON TRUNKING - WHITE

External corner, SL 20051

Wibe - wall bracket 11/25 - steel pre-galvanized

END CAB FOR DP PENDEL 21X21 MM

Clamp for fixing separat.wall

Pop-up type flush-mounting boxes - for workstation & meeting room table applications

Canalis - feed unit for KSA - 250 A - left or right mounting

FLAT ANGLE 90° - FOR LEGRAND DLP 50X130 SNAP-ON TRUNKING - WHITE

Flat bend halogen free for installation duct LF 30060 pearl white

FOR FIXING TO WALL OR CEILING. WALL PLATE 48X130 MM WITH WELDED 41X41 STRUT RAIL. WITH INWARD FORMED FLANGES WITH SERRATED PROFILE FOR EXTRA GRIP.SURFACE TREATMENT: PART OF THE BIS UltraProtect® 1000 FIXING SYSTEM

Front lid/cover for cabel trunking with special cut out for outlets

Blind cover for one module

Cantilever arm with double rail for fixing to wall or ceiling. Wall plate welded on Strut Profile with slots at 90° to each other to simplify fixing. With inward formed flanges with serrated profile for extra grip. CO2 welded. Suitable for in- and outdoor applications.Stands min. 1,000 hours salt spray test (max. 5% red rust) according to ISO 9227

Wibe - cantilever arm 50-150 - steel hot-dip galvanized

Thorsman - Stop end TAS+170/72 white

Thorsman - POL-T10 - one-sided - tension-mounted - natural

INTERNAL ANGLE 80-100° - FOR LEGRAND DLP 50X130 SNAP-ON TRUNKING - WHITE

DLP-S Snap-On trunking end cap to be used for insuring that the installations can not be reached without the use of tools, which is a demand for allowing the installation of socket outlets without back boxes. Trunking system with the possibility of mounting Legrand Mosaic range 45x45mm component directly in to the trunking

Wibe - dividing strip 39/24 - 1.75 m - steel pre-galvanized