Skrivere - side 130

Cyan, original, trommelsett, for WorkCentre 7120, 7125, 7220, 7225

Transfer tape designet for presise die-cut applikasjoner, som kombinerer en sterk limstyrke med en romslig 30.5 x 121.9 cm overflate for ryddige, kontrollerte overføringer.

Det Cricut StrongGrip - transfer tape - 30.5 x 121.9 cm holder intrikate vinylformer fast for jevn plassering, og sørger for konsistente prosjekter og færre unødvendige justeringer.

ANYCUBIC PETG-CF IPHTFBK-101 is a carbon fiber-reinforced 3D printing filament designed for applications that require enhanced strength, stiffness, and durability. Compared to standard PETG, it offers improved impact resistance and greater dimensional stability, making it suitable for functional parts, engineering projects, and demanding prototypes. The carbon fiber content creates an attractive satin-matte finish that helps reduce the visibility of layer lines, resulting in a cleaner appearance with minimal post-processing. Its resistance to moisture, weather exposure, and deformation makes it a reliable choice for both indoor and outdoor use.

7 ml, gul, original, blekkbeholder, for PIXMA iP8750, iX6850, MG5550, MG5650, MG5655, MG6450, MG6650, MG7150, MG7550, MX725, MX925

160 ml, gul, original, blekkbeholder, for imagePROGRAF GP-2600S, GP-4600S, GP-6600S, PRO-2600, PRO-4600, PRO-6600

25.9 ml, lysesvart, original, blister, blekkpatron, for Stylus Photo R3000

25.9 ml, fotosort, original, blister, blekkpatron, for Stylus Photo R3000

Sunlu PLA High-Speed White is developed for faster 3D printing while maintaining smooth surfaces and clear details. At speeds of up to 100 mm/s, it produces cleaner results than conventional PLA, while its improved structure makes overhangs easier to print. Angles below 70° can be produced without supports, depending on the model and print settings, reducing material use and post-processing. The white finish gives models a clean, neutral appearance, while rapid curing and improved heat dissipation help maintain stable printing at higher speeds.

The Dudao L25SM cable is a robust and practical solution for everyday charging and data transfer of devices with a micro-USB port. It supports currents up to 3A, enabling fast and stable charging of smartphones, tablets, and other compatible devices. The soft liquid silicone sheathing makes the cable flexible, comfortable to hold, and kink-resistant. Data transfer speeds of up to 480 Mbps allow for efficient file synchronization. This cable is designed for intensive, daily use.

Extra High Capacity, gul, original, tonerpatron LRP, for Lexmark C2425dw, C2535dw, MC2425adw, MC2535adwe, MC2640adwe

Filament PET-G 1.75 mm tilbyr enkel printing med høy slagstyrke, utmerket fleksibilitet, hydrofob oppførsel, nesten ingen warping eller krymping og nøytral lukt.

Verbatim PET-G filament 1.75 mm - White er laget av pellets i matemballasjekvalitet og produsert med høye kvalitetskontroller og stramme toleranser for å sikre konsistent mating og stabile utskrifter.

• Materiale: Polyethylene Terephthalate Glycol (PET-G)
• Diameternøyaktighet: 1.75 mm ± 0.05 mm
• Prosess-temperatur: 240±10 °C; anbefalt ekstruderingstemperatur: 235±10 °C; bedtemperatur: 90 °C
• Materialets nettovekt: 1 kg
• Mekaniske egenskaper: bøyningsstyrke 69 MPa, bøyningsmodul 2050 MPa, slagstyrke (Charpy) 8.1 KJ/m², strekkstyrke 50 MPa
• Ideell for mekanisk konseptmodellering, matbeholdere, medisinske objekter og transparente deler

Gir konsistente, enkle å printe PET-G-deler med sterke mekaniske egenskaper og lav warping for en rekke praktiske applikasjoner.

Purpur, 1 kg, boks, CR-Silk PLA filament (3D)

Overføringstape har ekstra sterkt lim som fester design på ujevne, uvanlige eller buede flater samtidig som det tåler varme opptil 205°C for pålitelig varmeoverføring.

Cricut Sterk varmebestandig tape er en 2,5 cm x 10 m rull tilpasset bruk med strykepå, Infusible Ink, sublimeringsprodukter, Cricut-varmepresser, husholdningsstrykjern eller enhver varmepresse for å holde design presist på plass.

• Varmebestandig konstruksjon klassifisert til 400°F (205°C).
• Ekstra sterkt lim stabiliserer kreasjoner på kosedyr, gensere og capser.
• Utformet for strykepå, Infusible Ink og sublimeringsarbeidsflyter.
• Allsidig kompatibilitet med Cricut-varmepresser og andre varmeverktøy.
• Kompakt 2,5 cm bredde og 10 m lengde for flere prosjekter.

Nyt pålitelig plassering for hvert varmepresset prosjekt med slitesterk overføringstape med høyt feste.

Papir, matt, permanent selv-adhesiv, hvit, 80 x 40 mm 300 etikett(er) (25 ark x 12 opake arkivmappeetiketter

13 ml, svart, original, blekkbeholder, for PIXMA iP4300, iP4500, iP5300, MP520, MP600, MP610, MP810, MP960, MP970, MX850, Pro9000

4-pack, XL, svart, gul, cyan, magenta, original, blære med RF-alarm, blekkpatron, for WorkForce WF-2010, 2510, 2520, 2530, 2540, 2630, 2650, 2660, 2750, 2760

Permanet adhesiv, 102 x 152 mm 5700 stk (12 rull(er) x 475) merkelapper, for TLP 2242, 2622, 2642, 2722, 2742, 3642, 3742; TLP 2722, 2742, 3742

Joyroom S-A28 Flash Series 60W USB-C - USB-C cable 1m - black
The Joyroom S-A28 Flash Series cable is a practical cable for quickly and safely charging devices with a USB-C port. It supports up to 60W of power, making it suitable not only for smartphones but also tablets and laptops. It offers data transfer speeds of 480 Mbps, allowing for convenient file copying and device synchronization. High-quality aluminum connectors and a strong nylon braid ensure durability and resistance to damage. The 1-meter length makes the cable ideal for everyday use at home, in the office, and on the go.

Svart, original, blekkbeholder, for PIXMA iP1800, iP1900, iP2500, iP2600, MP140, MP190, MP210, MP220, MP470, MX300, MX310

Capacity: 1 x 4.000 pages

Suitable for:
Brother HL-L-Serie
8360, 8360 CDW, 8260, 8260 CDW, 8260 OW

Brother MFC-L-Serie
8690, 8690 CDW, 8900, 8900 CDW, 8690 CDW (G1), 8900 CDW (G1)

Brother DCP-L-Serie
8410, 8410 CDW, 8410 CDW (G1)

5.6 ml, gul, original, blekkbeholder, for PIXMA TS6251, TS6350, TS6351, TS705, TS8252, TS8350, TS8351, TS8352, TS9550, TS9551

Svart, original, tonersett, for ECOSYS MA3500CIFX

Cyan, original, tonerpatron, for bizhub C3320i

USB-kabel, USB-C (hann) til USB-C (hann), USB4 / Thunderbolt 3 / Thunderbolt 4 / DisplayPort 1.4, 48 V, 5 A, 1 m, halogenfri, passiv, 4K 120 Hz støtte, 8K 60Hz støtte, utvidet effektområde (EPR), støtte for Power Delivery 3,1, svart

Sunlu PLA+ 2.0 Green is a durable PLA filament with improved flow and support for printing speeds of up to 300 mm/s. Compared with standard PLA, it offers up to 1.5 times greater flow for more consistent extrusion. The 1.75 mm diameter and ±0.02 mm tolerance help maintain precise material delivery, while the low tendency to warp makes the filament suitable for stable everyday printing. The green color gives finished models a clear, practical appearance, making it suitable for both functional parts and general 3D printing projects.