This Resi9 product is a low voltage miniature circuit-breaker (MCB). It is a 3P+N circuit breaker with 3 protected pole and 13A In rated current and C tripping curve. The Icn rated short-circuit breaking capacity is up to 6000A at 400VAC with operating frequency of 50Hz to 60Hz conforming to EN/IEC 60898-1 standard. This miniature circuit-breaker protects circuit against short-circuit and overload current. This product complies with EN/IEC 60898-1 standard. The electrical endurance is up to 7500 cycles and the mechanical endurance is up to 20000 cycles. The Resi9 is targeted to residential for individual and collective buildings. This circuit-breaker has an ON/OFF indication for local signalling with toggle control. It has a tunnel type terminals connection at top or bottom. The connection allows rigid copper cables. The cable cross section capacity is from 1mm2 to 16mm2. The connection allows flexible copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The connection allows flexible with ferrule copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The Ue rated operational voltage is up to 400VAC with operating frequency of 50Hz to 60Hz. The Ui rated insulation voltage is up to 440VAC. The Uimp rated impulse withstand voltage is 4kV. The overvoltage category is 3. It can be mounted on DIN rail for modular installation. The width in 9mm pitch is 6. The dimensions are (W) 54mm x (H) 81mm x (D) 73.5mm. The product colour is white (RAL 9003). The product weight is 320g. The pollution degree is 2 conforming to EN/IEC 60898-1 standard. The relative humidity is 95% at 55°C. The level of tropicalisation is 2 conforming to IEC 60068-1 standard. The limitation class is 3 conforming to EN/IEC 60898-1 standard. The wire stripping length is 13mm (top or bottom). The tightening torque of connection is 2N.m (top or bottom) for PZ2 screwdriver type. According to IEC 60529 standard, the IP degree of protection is IP20 and becomes IP40 once in mod

This is a 3 poles basic frame for ComPacT NSX160B. ComPacT NSX is designed to optimize space and breaking capacity for all standard and specific applications. This basic frame comes without trip unit, and is compatible with any type of trip unit which has to be ordered separately The breaking capacity Icu is 25kA at 415VAC 50/60Hz. The operational voltage is 690VAC 50/60Hz (limited to 440VAC 50/60Hz if there is an earth-leakage protection). It can be equipped with a variety of optional functions and accessories. The dimensions are 105mm x 161mm x 86mm. It ensures compliance with international standards (IEC 60947), CCC, EAC and marine specifications. ComPacT NSX160B is part of Schneider Electric EcoStruxure Power architecture.

Schneider Electric LAD8N20 hjelpekontakt

This is a 3 poles basic frame for ComPacT NSX160F. ComPacT NSX is designed to optimize space and breaking capacity for all standard and specific applications. This basic frame comes without trip unit, and is compatible with any type of trip unit which has to be ordered separately The breaking capacity Icu is 36kA at 415VAC 50/60Hz. The operational voltage is 690VAC 50/60Hz (limited to 440VAC 50/60Hz if there is an earth-leakage protection). It can be equipped with a variety of optional functions and accessories. The dimensions are 105mm x 161mm x 86mm. It ensures compliance with international standards (IEC 60947), CCC, EAC and marine specifications. ComPacT NSX160F is part of Schneider Electric EcoStruxure Power architecture.

Zelio RXG are a series of plug-in relays with a width of only 16 mm and robust faston connectors which is compatible with similar relays from other vendors. The relays are available with 1 C/O contact with 10A or 2 C/O contacts with 5A maximum load and it is possible to get them with or without lockable testbutton and status LED.A protection module (diode, varistor or RC-circuit) can be inserted into the socket if needed.The sockets RGZExxxx has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RGZE08P is a socket with separate push-in terminals that fits with RXG relays with 2 C/O contacts.The socket has a width of 16 mm and protection modules can be inserted directly next to the supply terminals.The integrated holding clip protect the relay from falling out when inserted into the socket.The socket has push-in terminals for easy wiring without the use of any tool and optimum protection against vibrations.The RGZE08P fits all RXG2xxx plug-in relays with 2 C/O contacts.Additional marking of the socket can be done with the RSZL300 legend which is easily mounted on the sockets.Each terminal have room for 2 wires with a wire size between 0,5..1,5 mm2 and there is a integrated test point built into the socket.For connecting more than one socket to the same supply, the RSZS02 jumper is inserted next to the A2 terminal and it works across the ranges.The socket is marked with both NEMA and IEC markings.

Reststrømsvern RCD 3P + N, 40A, 400V, 30mA, klasse A med N-terminal på høyre side. Multi 9 reststrømsvern (RCCB) beskytter mennesker mot elektrisk støt ved direkte og indirekte kontakt. I tillegg beskytter de installasjoner mot brann forårsaket av overgangen av elektriske installasjoner. Denne klasse A reststrømbryteren har tre poler + N-polemerking på 40A ved 400V og har en følsomhet på 30 mA. Enheten er utstyrt med testknapp foran, er bred nok til å montere på DIN-skinne og er bredde på 72 mm.

Schneider Electric A9E18325 ikke kategorisert

Schneider Electric A9F04710 strømkretsbryter 3

Schneider Electric iID strømkretsbryter 4P

Schneider Electric A9F06210 strømkretsbryter 2

Schneider Electric A9A15322 ikke kategorisert

Schneider Electric Acti9 iCV40 strømkretsbryter 1P + N

Schneider Electric iID strømkretsbryter 4P

Kamskinne 3pol+Neutral 80A 10moduler a 18mm, iID RCD og iC60 kretsbryter N,L1,L2,L3/N,L1,N,L2,N,L3......., RAL7016 230V/400VAC

Schneider Electric iC40N strømkretsbryter 3P + N

iC60N - miniatyrkretsbryter - 1P - 6A - B-kurve

iC60H - miniatyrkretsbryter - 2P - 2A - C-kurve

C120N - strømbryter - 4P - 100A - C-kurve

iID - jordfeilbryter - 4P - 63A - 30mA - SI type

spreader sett - 45 mm pitch - flat tilkobling - 3 poler

IEC / EN 60947-2IEC / EN 60898-1I henhold til de ovennevnte standardene:Kretsbrytere kombinerer følgende funksjoner:- kretsbeskyttelse mot kortslutningsstrømmer- kretsbeskyttelse mot overbelastningsstrømmer,- egnet for isolasjon

Acti9 IC60 RCBO 2P 10A 30mA C 10kA SI. For beskyttelse av endekretsen og beskyttelse av mennesker mot elektrisk støt ved direkte kontakt (30 mA). Samt jordfeil på frontplaten

nøkkel for nullstillingsknapp - 455

Motorvifte 156 m3/h 230V

Lang terminalskjerm - 4 poler - 0<250A