NEW - side 376

Koblingskabel, RJ-45 (hann) til RJ-45 (hann), 5 m, 5.8 mm, UTP, CAT 6, IEEE 802.3af/IEEE 802.3at/IEEE 802.3bt, formstøpt, flertrådet, svart, pantone 3C

Spigen Tough Armor Pro (Mag Fit) mobiltelefonetui 19,3 cm (7.6") Etui Mørkeblå

LED-skjerm, 17", portabel, 2560 x 1600 WQXGA @ 60 Hz, IPS, 350 cd/m², 30 ms, HDMI, 2xUSB-C, høyttalere

Oppladbar AAA-batteripakke kombinerer fire litium-ion AAA-batterier med en USB-C-ladekabel, 1.5 V utgang, 900 mWh energi, 750 mAh kapasitet og over 1000 ladesykluser.

Batteriene lades via Micro USB-porter og leverer jevn utgang fra full til tom, med innebygde indikatorer som viser når ladingen er fullført.

• 4 oppladbare AAA litium-ion-batterier inkludert
• USB-C til 4 Micro USB-kabel for samtidig lading
• Ladetid under 2 timer avhengig av ladertype
• Integrert sikkerhetskrets beskytter batterier og ladeutstyr
• Beskyttelse mot overbelastning, lekkasje, kortslutning, overspenning og høy temperatur

En praktisk oppladbar batteriløsning for hverdagsenheter som trenger stabil strøm og enkel lading.

The GARRETT Pro-Pointer AT Blackline is a handheld pinpointer for locating ferrous and non-ferrous metal objects with 360° detection and a pinpointing probe for precise targeting. Three sensitivity levels make it easier to detect smaller objects such as gold nuggets, while proportional audio and vibration alerts indicate when you are approaching the target. The IP68-rated design allows the pinpointer to be submerged to 6 metres, while Fast Retune, Stealth mode and one-button operation make it easy to use in different conditions.

The chic Guess case from the Big 4G Logo Classic Logo collection features an elegant, recognizable 4G pattern signed with the gold Guess logo.

Water cooling extender fitting for custom loops connects components with male and female threading, precisely machined brass construction and EPDM sealing rings.

The Thermal Grizzly DeltaMate Extender - MF7 is installed between a water-cooling component port and a fitting to add clearance within an individual custom water cooling setup.

• Precisely machined brass construction
• EPDM O-rings resistant to ozone and UV radiation
• Male and female threading for extension use
• Robust design supports hex key installation
• Designed for seamless integration with DeltaMate fittings

A practical extender fitting for building a clean, reliable custom water cooling loop.

The chic Guess case from the Big 4G Logo Classic Logo collection features an elegant, recognizable 4G pattern signed with the gold Guess logo.

Fitting for custom water cooling loops combines precisely machined brass construction, EPDM sealing rings and a secure soft-tube connection design.

Thermal Grizzly DeltaMate Fitting is designed to connect individual components in a liquid cooling setup, using a single tapered barb and a knurled compression ring to grip flexible tubing with high retention force.

• Precisely machined from brass
• EPDM O-rings resistant to ozone and UV radiation
• Single tapered barb for straightforward tube installation
• Knurled compression ring helps secure the tubing
• Robust design for reliable installation

A practical fitting for building a clean and dependable custom water cooling loop.

GPS/GLONASS/GALILEO/BeiDou/QZSS-sporingsenhet, 128 MB

Quick disconnect fitting for custom water cooling loops, DeltaMate Quick Disconnect Female - M combines a drip-free coupling, integrated shutoff function, vacuum-assisted anti-leak design and precision-machined brass construction.

It is designed for individual components in a custom water cooling loop and features a female QDC connector for pairing with a matching male QDC fitting.

• True zero-spill quick disconnect
• Push-to-connect and slide-to-release locking mechanism
• High-flow internal geometry minimizes restriction
• EPDM O-rings resistant to ozone and UV radiation

A practical fitting for easier component changes while maintaining reliable sealing in a custom cooling setup.

Akrylskrape for fjerning av silikonlim og rester av indiumlodde fra deliddede prosessorpakker og CPU-dies, laget av akryl med et ergonomisk grep.

Thermal Grizzly TG Scraper er utviklet for forsiktig arbeid på prosessorer etter delidding, og bidrar til å løsne rester fra sensitive overflater under klargjøring og rengjøring.

• Laget av akryl
• Utviklet for fjerning av silikonlim
• Egnet for rester av indiumlodde på CPU-dies
• Ergonomisk design for et fast og sikkert grep
• Inkluderer 3 TG Scrapers

Ideell for kontrollert prosessorvedlikehold der forsiktig håndtering er avgjørende.

GPU-pakningssett TG GPU Guard er en svært komprimerbar skumpakningsløsning for grafikkort-GPU-dies som bidrar til å beskytte nærliggende elektroniske komponenter ved bruk av flytende metall eller andre elektrisk ledende termiske grensesnittmaterialer.

Under montering av kjøler komprimeres skummet av trykk for å bidra til å hindre at flytende metall eller kjølepasta sprer seg til PCB-en, samtidig som oksygenkontakt med det flytende metallet begrenses.

• Beskytter SMD-er ved siden av GPU-en
• Galliumbestandig skummateriale
• Leveres på overføringsfilm for enklere påføring
• Inkluderer pakninger for GeForce RTX 5090, GeForce RTX 5080 og GeForce RTX 4090
• Ikke gjenbrukbar og ikke for CPU-er

TG GPU Guard gir målrettet beskyttelse for GPU-applikasjoner med flytende metall og bidrar til å opprettholde pålitelig ytelse i det termiske grensesnittet.

Leather 4G Flowers Print Metal Classic Logo MagSafe is an exclusive line of protective cases that combines both exceptional functionality and stylish, unique design. This collection was designed for people who value not only the security of their phone, but also an elegant appearance. Each case from this series is a true expression of good taste, offering excellent quality of workmanship and unique aesthetics.

Exclusive and chic Guess case from the 4G collection features an elegant, recognizable 4G pattern signed with a gold Guess logo. For decades, the Guess brand has been associated with excellent design and the highest quality. The 4G collection of protective cases is based on the same values.

Travel Snap Pro 3in1 Selfie Stick Stand Tripod with remote control er en kompakt, sammenleggbar trådløs selfiestang og tripod i svart med 360° full vinkelrotasjon.

Utformet for å fange innhold uansett hvor du går, støtter den fleksibel posisjonering for bilder og videoer og muliggjør enkel håndfri opptak med den medfølgende trådløse fjernkontrollen.

• 3-i-1 selfiestang, støtte og tripod
• 360° full vinkelrotasjon
• Trådløs fjernkontroll
• Kompakt og sammenleggbar design
• Egnet for selfies, gruppebilder og videoopptak

Travel Snap Pro tilbyr en praktisk og stabil løsning for reise og daglig innholdsproduksjon.

IML Metal Mountain Logo MagSafe is an exclusive line of protective cases that combines both exceptional functionality and stylish, unique design. This collection was designed for people who value not only the security of their phone, but also an elegant appearance.
Each case from this series is a true expression of good taste!

The chic Guess case from the Grained Big 4G Logo Small Classic Logo collection features an elegant, recognizable 4G pattern signed with a gold Guess logo.

Water cooling extender fitting DeltaMate Extender - MF7 connects individual components in a custom water cooling loop with precisely machined brass construction and EPDM sealing rings.

Designed as an extension fitting, it is installed between a water-cooling component port and a fitting to create additional spacing in the loop.

• Made from brass for durable water cooling use
• EPDM O-rings resistant to ozone and UV radiation
• Male and female threading for loop integration
• Robust design for reliable installation

A practical connector for building a clean, reliable custom water cooling setup.

Water cooling fitting for custom loops connects individual components with precisely machined brass construction, EPDM sealing rings and secure soft-tube installation.

Designed for flexible plastic soft tubes, the DeltaMate ST16 uses a single tapered barb and a knurled compression ring to grip the tubing with high retention force.

• Brass body for durable water cooling connections
• EPDM O-rings resistant to ozone and UV radiation
• Single tapered barb for straightforward tube installation
• Knurled compression ring for secure tube retention

A reliable fitting for building a clean, stable custom water cooling loop.

Water cooling fitting Thermal Grizzly DeltaMate ST16 is a brass connector for soft tubes in custom water cooling loops, with EPDM sealing rings, a tapered barb and a knurled compression ring for secure tube installation.

Precisely machined from brass, the fitting is designed to connect individual loop components, while the EPDM O-rings resist ozone and UV radiation.

• For flexible soft tubes in custom water cooling systems
• Single tapered barb for straightforward installation
• Knurled compression ring grips tubing with high retention force
• Robust design supports installation with a hex key

DeltaMate ST16 helps create a clean, secure and reliable custom water cooling loop.

Water cooling connector DeltaMate Rotary is a precisely machined brass rotary fitting for individual components in a custom water cooling loop, with male and female threading and EPDM sealing rings.

The brass construction is designed for anodic compatibility with other metals, while the EPDM O-rings are resistant to ozone and UV radiation.

• For custom water cooling loops
• Made from machined brass
• EPDM sealing rings
• Supports modular use with DeltaMate Rotary and Extender fittings
• Additional fittings can mechanically lock the rotary joint
• Includes an optional DeltaMate logo cover

DeltaMate Rotary gives your water cooling setup a robust, cleanly integrated connector for reliable loop building.

Water cooling fitting for soft tubes connects individual components in a custom water cooling loop with precisely machined brass construction and EPDM sealing rings.

Thermal Grizzly DeltaMate is designed for secure tube installation, using a single tapered barb and a knurled compression ring to grip flexible tubing with high retention force.

• Brass construction for durable water cooling connections
• EPDM O-rings resistant to ozone and UV radiation
• Single tapered barb for straightforward tube installation
• Knurled compression ring for secure tubing retention
• Robust design supports installation with a hex key

A practical fitting for building reliable custom liquid cooling loops with clean component integration.

Quick disconnect fitting for custom water cooling loops with a drip-free coupling, integrated shutoff function, vacuum-assisted anti-leak design and precision-machined brass construction.

Thermal Grizzly DeltaMate Quick Disconnect Female - M uses a female quick-disconnect connector with a male thread and highly elastic EPDM O-rings that resist ozone and UV radiation.

• True zero-spill quick disconnect design
• Push-to-connect and slide-to-release locking mechanism
• High-flow internal geometry to minimize restriction
• Robust brass body supports installation with a hex key

Designed for serviceable custom water cooling setups where components need to be swapped efficiently and coolant loss must be reduced.

Water cooling connector DeltaMate Rotary is designed for custom water cooling loops, with precisely machined brass construction, EPDM sealing rings and modular use with DeltaMate Rotary and Extender Fittings.

The fitting supports individual loop components and uses a robust rotary joint that can be mechanically locked by subsequent fittings for secure assembly.

• Made from brass with EPDM O-rings
• O-rings resist ozone and UV radiation
• Includes an optional aesthetic cover with DeltaMate logo
• Designed for seamless integration with DeltaMate fittings

A practical fitting for building a clean, reliable custom water cooling setup.