Ringke Mobil - Deksel og etui - side 2

Protect your headphones with a durable Onyx case from the Rinkke brand. The case provides the convenience of Magsafe wireless charging, safe and fast replenishment of energy without having to remove the cover.

The case is made of flexible and durable scratch-resistant TPU.
The matte-grained, non-slip texture will protect against fingerprints and scratches and ensure effective grip and high comfort of use.

The precisely crafted design makes the Onyx not only look great, but also adheres perfectly to the device.

In addition, the case is equipped with a practical carabiner that increases the range of possibilities - the headphones can be attached to a lanyard with keys or a belt loop in the trousers, making it almost impossible to fall or lose the set.

The crystal clear Easy Slide tempered glass from Ringke perfectly renders the displayed colors and does not affect the sensitivity of the touch.
Made of recycled and reinforced tempered glass. The high degree of hardness (9H) makes Easy Slide scratch-resistant even in contact with sharp objects (knife or keys).

The glass is covered with a special oleophobic coating, thanks to which the aspect of leaving fingerprints or other contaminants on the surface of the glass is minimized.

Easy Slide is dedicated in particular to protecting the screen from scratches as well as impacts resulting from an unexpected fall of the phone.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

* Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

ASSEMBLY INSTRUCTIONS:
1. Start the installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles by swiping your finger in a circular motion.

Done! Enjoy a perfectly applied screen protector.

A unique Ringke Fusion X case, the undoubted advantage of which is its small size in relation to the protection offered.

Made of flexible polycarbonate, additionally reinforced with shock-absorbing TPU plastic. The whole thing perfectly eliminates any falls and protects against scratches, and also does not significantly affect the appearance by revealing the back panel of the phone. The case has taken on the character of an armored case, as it differs from the basic version with corner extensions, which strengthens and protects these sensitive parts of the phone. Thanks to the added special embossing on the edges, the phone in the case fits much more securely in the hand. Recommended especially for everyday practical protection of the device.

The Fusion X has been subjected to fitness tests and has received MIL STD 810G-516.6 certification, which means that it has fallen 26 times from a height of 2 meters.

All Ringke products are tested for abrasion resistance and a precise fit to deliver a high-quality case.

The Ringke Fusion X Magnetic MagSafe is a rugged hybrid case that combines maximum protection with MagSafe functionality. Made of two layers - flexible thermopolyurethane (TPU) and hard polycarbonate (PC) - it provides effective protection against falls and damage. A built-in magnetic ring allows you to securely attach your MagSafe accessories and fast wireless charging. The black frame contrasts with the transparent back, creating a sporty look and emphasizing the phone's original design.

The case is Mil-Grade military certified, which confirms its durability. Shock Absorption technology in the corners absorbs shocks and shocks, protecting your phone in the most vulnerable points. Raised edges around the screen and camera protect these sensitive components from contact with flat surfaces. The magnets ensure full compatibility with the entire MagSafe accessory ecosystem.

Precise cutouts allow you to freely access all the functions of the phone. Integrated button covers made with ActiveTouch technology guarantee full responsiveness without sacrificing sensitivity. The one-piece design makes assembly and disassembly simple and quick. The case retains full MagSafe wireless charging functionality without having to remove the case.

Ringke Silicone MagSafe is a slim and durable case with a hybrid design. The three-layer structure combines a soft silicone outer shell with a reinforcing PC frame on the inside, finished with soft microfiber to protect the back of the phone from scratches. The material fits perfectly into the shape of the device, providing full access to all ports and buttons. The silicone surface is pleasant to the touch and guarantees a firm grip, minimizing the risk of the phone slipping out of your hand during daily use.

The built-in magnetic ring ensures full compatibility with MagSafe accessories, allowing you to charge wirelessly without having to remove the case. The magnets hold on to MagSafe accessories, ensuring a stable connection to chargers, holders or magnetic wallets. Gently raised edges around the screen and camera islands protect against scratches when placing the phone on flat surfaces.

The case has integrated covers for buttons and precise cutouts for ports, offering full access to interfaces and the highest comfort of use. The slim design does not significantly increase the dimensions of the phone, while maintaining its elegant appearance. The durable silicone material guarantees long-lasting protection and a pleasant experience in contact with the case.

The Ringke Silicone Case combines stylish design with excellent protection. The slim case discreetly protects the headphones from scratches and damage without depriving them of their elegant appearance.

Made of very good quality materials that combine the flexibility of silicone with the strength of TPU. The case perfectly protects against dust, dirt and scratches that may arise as a result of everyday use. It maintains a slim profile without adding unnecessary volume, and the smooth, slightly matte surface is pleasant to the touch. The cover provides a great grip, so there is no question of the box accidentally slipping out of your hands.

The cover provides free access to the charging port as well as the LED. Thanks to its design and the materials used, it is compatible with wireless chargers. The set also includes a useful carabiner, allowing you to hang the cover anywhere, e.g. by the belt of a backpack, purse or trousers. Assembly and disassembly is quick and simple - both parts of the case are easy to disassemble, making it easy to remove the device from the case.

Ringke Onyx is a flexible case made of durable thermoplastic TPU polyurethane that combines effective protection with a distinctive design. The original, rough texture covering the entire surface is a response to smooth cases prone to scratches and fingerprints. The textured surface hides any scratches and stains, while ensuring a more secure grip in the hand. The elastic material makes it easy to put on and take off the case from your phone.

The case effectively protects the device from the effects of falls thanks to the Military Grade certificate, which means that it has passed a number of endurance tests. The design absorbs shocks and protects the phone from mechanical damage. Raised edges around the screen and camera island protect the display and lenses from scratches when placing the phone on flat surfaces.

The case provides easy access to all interfaces thanks to precise cutouts for ports and integrated button covers. The rough sides make the phone sit securely in your hand, minimizing the risk of accidental slipping. Special cutouts allow you to mount a lanyard or keychain.

Ringke Onyx Magsafe is a flexible case made of durable thermoplastic TPU polyurethane with a built-in magnetic ring for full compatibility with MagSafe accessories. The original, rough texture covering the entire surface is a response to smooth cases prone to scratches and fingerprints. The textured surface hides any scratches and stains, while ensuring a more secure grip in the hand. The elastic material makes it easy to put on and take off the case from your phone.

A built-in magnetic ring allows for wireless charging and a stable connection to MagSafe chargers, mounts, and wallets without having to be removed. The magnets hold firmly on the accessories, ensuring a secure hold in any situation. The case effectively protects the device from the effects of falls thanks to the Military Grade certificate, which means that it has passed a number of endurance tests. The design absorbs shocks and protects the phone from mechanical damage.

Raised edges around the screen and camera island protect the display and lenses from scratches when placing the phone on flat surfaces. The case provides easy access to all interfaces thanks to precise cutouts for ports and integrated button covers. The rough sides make the phone sit securely in your hand, minimizing the risk of accidental slipping. Special cutouts allow you to mount a lanyard or keychain.

Ringke Fusion X is a rugged hybrid case that combines maximum protection with a distinctive design. Made of two layers - flexible thermopolyurethane (TPU) and hard polycarbonate (PC) - it provides effective protection against falls and damage. The black frame contrasts with the transparent back, creating a sporty look and emphasizing the phone's original design. The lightweight design maintains the slim profile of the device while providing a secure and stable grip.

The case is Mil-Grade military certified, which confirms its durability. Shock Absorption technology in the corners absorbs shocks and shocks, protecting your phone in the most vulnerable points. Raised edges around the screen and camera protect these sensitive components from contact with flat surfaces.

Precise cutouts allow you to freely access all the functions of the phone. Integrated button covers made with ActiveTouch technology guarantee full responsiveness without sacrificing sensitivity. The one-piece design makes assembly and disassembly simple and quick, making the case practical for everyday use.

Ringke Air is the perfect case for AirPods that provides protection and a sleek look while maintaining full wireless charging compatibility. Thanks to its slim design and flexible TPU, the case protects against scratches and drops without interfering with inductive charging.

In addition, the precise fit allows you to use the charging port and other functions without the need to remove the case. Ringke Air is a subtle yet effective protection that allows you to enjoy the convenience of charging without cables while taking care of your aesthetics

Ringke Fusion X is a rugged hybrid case that combines maximum protection with a distinctive design. Made of two layers - flexible thermopolyurethane (TPU) and hard polycarbonate (PC) - it provides effective protection against falls and damage. The black frame contrasts with the transparent back, creating a sporty look and emphasizing the phone's original design. The lightweight design maintains the slim profile of the device while providing a secure and stable grip.

The case is Mil-Grade military certified, which confirms its durability. Shock Absorption technology in the corners absorbs shocks and shocks, protecting your phone in the most vulnerable points. Raised edges around the screen and camera protect these sensitive components from contact with flat surfaces.

Precise cutouts allow you to freely access all the functions of the phone. Integrated button covers made with ActiveTouch technology guarantee full responsiveness without sacrificing sensitivity. The one-piece design makes assembly and disassembly simple and quick, making the case practical for everyday use.

Ringke Onyx is a flexible case made of durable thermoplastic TPU polyurethane that combines effective protection with a distinctive design. The original, rough texture covering the entire surface is a response to smooth cases prone to scratches and fingerprints. The textured surface hides any scratches and stains, while ensuring a more secure grip in the hand. The elastic material makes it easy to put on and take off the case from your phone.

The case effectively protects the device from the effects of falls thanks to the Military Grade certificate, which means that it has passed a number of endurance tests. The design absorbs shocks and protects the phone from mechanical damage. Raised edges around the screen and camera island protect the display and lenses from scratches when placing the phone on flat surfaces.

The case provides easy access to all interfaces thanks to precise cutouts for ports and integrated button covers. The rough sides make the phone sit securely in your hand, minimizing the risk of accidental slipping. Special cutouts allow you to mount a lanyard or keychain.

Ringke UX Magnetic is an advanced case that combines exceptional protection with a transparent, minimalist design. The hybrid design consists of three layers: soft flexible TPU on the outside, durable polycarbonate (Hard PC) on the inside, and built-in neodymium magnets on the base. Four magnets provide precise Qi2 alignment for smooth MagSafe charging.

Reinforced corners with shock absorption technology effectively absorb shocks, protecting against damage during daily use. The transparent design maintains the original appearance of the case, allowing you to enjoy the original color and design.

The thoughtful design provides convenient access to the back edge of the case, making it easy to open and close without the risk of damage. The built-in carabiner allows you to conveniently attach the case to your backpack, belt or bag, ensuring quick access and safety against loss. Precise cutouts guarantee full access to the charging port and status LED, without having to remove the case. The lightweight and slim design maintains compact dimensions without adding unnecessary bulk.

Ringke Onyx is a flexible case made of durable thermoplastic TPU polyurethane that combines effective protection with a distinctive design. The original, rough texture covering the entire surface is a response to smooth cases prone to scratches and fingerprints. The textured surface hides any scratches and stains, while ensuring a more secure grip in the hand. The elastic material makes it easy to put on and take off the case from your phone.

The case effectively protects the device from the effects of falls thanks to the Military Grade certificate, which means that it has passed a number of endurance tests. The design absorbs shocks and protects the phone from mechanical damage. Raised edges around the screen and camera island protect the display and lenses from scratches when placing the phone on flat surfaces.

The case provides easy access to all interfaces thanks to precise cutouts for ports and integrated button covers. The rough sides make the phone sit securely in your hand, minimizing the risk of accidental slipping. Special cutouts allow you to mount a lanyard or keychain

Ringke Fusion Magsafe is a modern, transparent case that combines aesthetics, functionality and high protection. Made from a combination of hard, scratch-resistant polycarbonate and a flexible, shock-absorbing TPU frame, the case provides effective protection against bumps and drops while exposing the original look of the device.

The integrated MagSafe magnetic ring allows you to quickly and securely connect to MagSafe compatible accessories, such as chargers, car holders and magnetic wallets. With a precise fit, Ringke Fusion doesn't restrict access to any ports or phone features, and the cutouts around the hinge and cameras are designed for comfort and safety.

The raised edges around the screen and lenses additionally protect against scratches when the device is placed with the screen down. The case is lightweight, slim and fits perfectly in the hand, maintaining the comfort of everyday use, and the discreet lanyard hole allows you to carry your phone safely.

A unique Ringke Fusion X case, the undoubted advantage of which is its small size in relation to the protection offered.

Made of flexible polycarbonate, additionally reinforced with shock-absorbing TPU plastic. The whole thing perfectly eliminates any falls and protects against scratches, and also does not significantly affect the appearance by revealing the back panel of the phone. The case has taken on the character of an armored case, as it differs from the basic version with corner extensions, which strengthens and protects these sensitive parts of the phone. Thanks to the added special embossing on the edges, the phone in the case fits much more securely in the hand. Recommended especially for everyday practical protection of the device.

The Fusion X has been subjected to fitness tests and has received MIL STD 810G-516.6 certification, which means that it has fallen 26 times from a height of 2 meters.

All Ringke products are tested for abrasion resistance and a precise fit to deliver a high-quality case.

An extremely light and thin protective case that allows you to forget about yourself during use. Made of soft and durable thermoplastic, which provides a firm grip and excellent grip while maintaining the original design of the device.

The silicone has been subjected to fitness tests and has received MIL STD 810G-516.6 certification, which means that it has fallen 26 times from a height of 2 meters

All Ringke products are tested for abrasion resistance and a precise fit to deliver a high-quality case.

The unique Ringke Fusion Magsafe case, the undoubted advantage of which is its small size in relation to the protection offered.

Made of flexible polycarbonate, additionally reinforced with shock-absorbing TPU plastic. The whole thing perfectly eliminates any falls and protects against scratches. The case does not significantly affect the appearance and significantly improves the reliability and comfort of holding the phone in the hand. Recommended especially for everyday practical protection of the device.

Ringke Fusion Magsafe features a magnetic ring compatible with MagSafe wireless technology, providing a quick and easy connection to all MagSafe-enabled accessories.

The Fusion has been subjected to fitness tests and has received MIL STD 810G-516.6 certification, which means that it has fallen 26 times from a height of 2 meters.
All Ringke products are tested for abrasion resistance and a precise fit to deliver a high-quality case.

Ringke Fusion Magnetic MagSafe is a hybrid case that combines robust protection with MagSafe functionality. Made of flexible polycarbonate reinforced with shock-absorbing TPU plastic, it provides effective protection against falls and scratches. A built-in magnetic ring allows you to securely attach your MagSafe accessories and fast wireless charging. The transparent back allows you to maintain the original look of the phone while protecting it from everyday damage.

The case is Mil-Grade military certified, which confirms its durability. Shock Absorption technology in the corners absorbs shocks and shocks, protecting your phone in the most vulnerable points. Raised edges around the screen and camera protect these sensitive components from contact with flat surfaces. The magnets ensure full compatibility with the entire MagSafe accessory ecosystem.

Precise cutouts allow you to freely access all the functions of the phone. Integrated button covers made with ActiveTouch technology guarantee full responsiveness without sacrificing sensitivity. The case has an additional cutout for mounting a lanyard. The one-piece design makes assembly and disassembly simple and quick. The case retains full MagSafe wireless charging functionality without having to remove the case.

A unique case, the undoubted advantage of which is its small dimensions in relation to the protection offered.

Made of flexible polycarbonate, additionally reinforced with shock-absorbing TPU plastic. The whole thing perfectly eliminates any falls and protects against scratches, and it also does not significantly affect the appearance by revealing the back panel of the phone. The case has taken on the character of an armored case, as it differs from the basic version with corner extensions, which strengthens and protects these sensitive parts of the phone. Thanks to the added special embossing on the edges, the phone in the case fits much more securely in the hand. Recommended especially for everyday practical protection of the device.

The Fusion X has been subjected to fitness tests and has received MIL STD 810G-516.6 certification, which means that it has fallen 26 times from a height of 2 meters.

All Ringke products are tested for abrasion resistance and a precise fit to deliver a high-quality case.

The Ringke Air case is an excellent choice for those who value minimalist design, lightness and effective protection of their smartphone in everyday use. Made of clear, flexible TPU material, the case provides a great fit to your phone's case, preserving its original look and feel. Thanks to its ultra-thin design, it practically does not thicken the device, while offering effective protection against scratches and minor shocks.

For added security, the gently raised edges around the screen and camera protect these sensitive components when you put your phone down on flat surfaces. Integrated Duo-QuikCatch holes on the sides allow you to attach lanyards or tags (accessories available separately) for easy customization and convenience.

It's the perfect solution for those who don't want to compromise on the aesthetics of the phone, and at the same time need daily, reliable protection.

Ringke Onyx is a flexible case made of durable thermoplastic TPU polyurethane that combines effective protection with a distinctive design. The original, rough texture covering the entire surface is a response to smooth cases prone to scratches and fingerprints. The textured surface hides any scratches and stains, while ensuring a more secure grip in the hand. The elastic material makes it easy to put on and take off the case from your phone.

The case effectively protects the device from the effects of falls thanks to the Military Grade certificate, which means that it has passed a number of endurance tests. The design absorbs shocks and protects the phone from mechanical damage. Raised edges around the screen and camera island protect the display and lenses from scratches when placing the phone on flat surfaces.

The case provides easy access to all interfaces thanks to precise cutouts for ports and integrated button covers. The rough sides make the phone sit securely in your hand, minimizing the risk of accidental slipping. Special cutouts allow you to mount a lanyard or keychain.

Ringke Silicone MagSafe is a slim and durable case with a hybrid design. The three-layer structure combines a soft silicone outer shell with a reinforcing PC frame on the inside, finished with soft microfiber to protect the back of the phone from scratches. The material fits perfectly into the shape of the device, providing full access to all ports and buttons. The silicone surface is pleasant to the touch and guarantees a firm grip, minimizing the risk of the phone slipping out of your hand during daily use.

The built-in magnetic ring ensures full compatibility with MagSafe accessories, allowing you to charge wirelessly without having to remove the case. The magnets hold on to MagSafe accessories, ensuring a stable connection to chargers, holders or magnetic wallets. Gently raised edges around the screen and camera islands protect against scratches when placing the phone on flat surfaces.

The case has integrated covers for buttons and precise cutouts for ports, offering full access to interfaces and the highest comfort of use. The slim design does not significantly increase the dimensions of the phone, while maintaining its elegant appearance. The durable silicone material guarantees long-lasting protection and a pleasant experience in contact with the case.

Ringke Onyx Magsafe is a flexible case made of durable thermoplastic TPU polyurethane with a built-in magnetic ring for full compatibility with MagSafe accessories. The original, rough texture covering the entire surface is a response to smooth cases prone to scratches and fingerprints. The textured surface hides any scratches and stains, while ensuring a more secure grip in the hand. The elastic material makes it easy to put on and take off the case from your phone.

A built-in magnetic ring allows for wireless charging and a stable connection to MagSafe chargers, mounts, and wallets without having to be removed. The magnets hold firmly on the accessories, ensuring a secure hold in any situation. The case effectively protects the device from the effects of falls thanks to the Military Grade certificate, which means that it has passed a number of endurance tests. The design absorbs shocks and protects the phone from mechanical damage.

Raised edges around the screen and camera island protect the display and lenses from scratches when placing the phone on flat surfaces. The case provides easy access to all interfaces thanks to precise cutouts for ports and integrated button covers. The rough sides make the phone sit securely in your hand, minimizing the risk of accidental slipping. Special cutouts allow you to mount a lanyard or keychain.

Ringke Onyx Alfa is a modern case made of durable thermoplastic TPU polyurethane that combines effective protection with a distinctive design. A dynamic texture with flowing vertical lines creates a distinctive, contemporary look that stands out from standard cases. The rough surface hides any scratches and stains, while ensuring a more secure grip in the hand. The elastic material makes it easy to put on and take off the case from your phone.

The case effectively protects the device from the effects of falls thanks to the Military Grade certificate, which means that it has passed a number of endurance tests. The design absorbs shocks and protects the phone from mechanical damage. Raised edges around the screen and camera island protect the display and lenses from scratches when placing the phone on flat surfaces.

The case provides easy access to all interfaces thanks to precise cutouts for ports and integrated button covers. The anti-slip sides make the phone lie securely in the hand, minimizing the risk of accidental slipping. A special cutout allows you to mount a lanyard or keychain.