Mobil - Andre tilbehør - side 24

Sandberg Touchscreen Stylus Pen Saver er en styluspenn med metallkropp og gummitupp for presis og praktisk input på berøringsskjerm.

• Metallhus: Gir et slitesterkt styluspenn-design som egner seg for daglig bruk som mobiltilbehør.
• Berøringskontroll med gummitupp: Fungerer som fingeren din på enhver berøringsskjerm, samtidig som den gir mer presis trykking enn en fingertupp.
• Hygienisk alternativ for signaturer: Lar deg unngå å bruke fingeren til å signere på skannerterminaler, noe som kan bidra til å redusere potensiell smitteoverføring.
• Påfestet stropp: Gjør berøringsskjermpennen enkel å feste til en nøkkelring for rask tilgang på farten.

En praktisk stylus for smarttelefoner, nettbrett og berøringsterminaler når du ønsker bedre presisjon og renere interaksjon.

4smarts 541719 GPS tracker & finder Universell Søker Hvit

Crossbody-mobilreim Tech-Protect C9S Rope Crossbody i svart og oransje kombinerer slitesterk nylon, en magnetisk spenne, MOLLE-feste for tilbehør og universelle adaptere for håndfri bæring av mobilen.

Utformet for å brukes over skulderen eller på tvers av brystet. Denne justerbare reimen holder smarttelefonen din nær og lett tilgjengelig uten at du må ta av reimen.

• Slitesterk nylonkonstruksjon
• Magnetisk lås for rask festing og løsning
• MOLLE-system for å feste tilbehør
• Dobbelt nylonbånd med metallkomponenter
• Universelle adaptere for alle smarttelefonmodeller og deksler

Hold telefonen og små hverdagsnødvendigheter tilgjengelig samtidig som du har hendene fri.

Ugreen v Passiv holder Mobiltelefon/smarttelefon Svart

Comfort, adaptability to different bikes and stability. The Wozinsky WBHBK3 phone holder for a bicycle or scooter will fit any type of handlebar with a diameter of 17-32 mm. It will hold your phone securely even on the roughest roads. It will also allow you to freely rotate your smartphone 360 ​​degrees.

It will hold your phone steady. The clamping handle has rubber pads that protect against damage
You can adapt it to different bikes. The holder is mounted on handlebars with a diameter of 17-32 mm
Compatible with many models of mobile phones. The jaws of the holder fit phones with a diagonal of 4.7-6.8 inches
It will allow you to set the phone at any angle. The handle rotates a full 360 degrees
You can attach it to the steering wheel extremely quickly. You don't need any tools for assembly

Auto Pokémon catcher leverer automatisk fangst og automatisk gjenstandsinnsamling med en 1.11" fullfargeskjerm, tilkobling til to enheter, skjermrotasjon og USB Type‑C-lading.

Auto Catch CARRY er et bærbart lommetilbehør designet for å holde fangst og innsamling i gang uten å gå glipp av muligheter, med animerte ikoner, valgfri vertikal eller horisontal visning og stabil tilkoblingsavstand opptil 10 meter avhengig av forholdene.

• Kobles til opptil to enheter samtidig
• 1.11" fargeskjerm med livlige, animerte ikoner
• Vertikale/horisontale skjermrotasjonsmoduser
• Superkondensator-energilagring for omtrent 14 dager under oppgitte testforhold
• Omtrent 90 minutters ladetid via Type‑C (USB‑C til USB‑C-kabel inkludert)
• Bluetooth 4.0 eller nyere

Få et kompakt, lett å ta med-oppsett som gjør daglig fangst og gjenstandsinnsamling enklere og mer konsekvent.

Kortetui- og ladesett for Plaud Note og Plaud Note Pro kombinerer et ultralett MagSafe-kompatibelt aramidfiberetui i moonrise med et USB-C-ladestativ.

PITAKA MagMod Card Sleeve & Charger Set er designet for strømlinjeformet hverdagsbæring, og holder Plaud Note lett, organisert og klar til å lade uten å fjerne etuiet.

• Aramidfiberkonstruksjon i romfartskvalitet
• Slank og lett profil
• Integrerte magneter for sikker tilkobling
• Åpninger for ladepinner for lading i etuiet
• Push-hole-design for enklere enhåndstilgang
• Ladestativ med innebygd USB-C-port

Et raffinert bære- og ladeoppsett som holder Plaud Note beskyttet og klar for daglig produktivitet.

Wireless lavalier microphone with USB-C connector. Looking for a simple yet effective way to improve the sound quality of your videos? Look no further than our Wireless Lavalier Microphone, USB-C! This lightweight microphone is perfect for broadcasting live interviews, recording short videos such as moves and tricks or to create TikToks. Plus, it can be easily clipped onto any shirt, and its long-lasting battery provides up to 10 hours of operating time.

If you want great sound reception with minimal interference from your surroundings, you'll be thrilled with this microphone's high sensitivity. It also has a filter built around it so your sound is crystal clear. So don't hesitate - upgrade your sound quality with our Wireless Lavalier Microphone, USB-C today! Advantages of Lippa wireless microphone with USB-C connector. Connects quickly to your USB-C type device (eg Samsung, OnePlus, Xiaomi, etc) with included receiver. Get better sound in your recordings - e.g. while filming, interviewing, making tiktok, instagram, youtube and much more. USB-C connector for Android, newer iPads and much more - wide compatibility. Secure and stable connection with receiver. Long battery life of up to 10 hours and with clear sound that captures your voice clearly. Easy setup - plug and play. A USB-A to USB-C cable for charging and a small fabric bag with a closable opening for storage and travel are included. NOTE: Not compatible with iPhone.

Spigen Gearlock Out Front Bike Mount

• No matter what you’re doing, you can trust that your device will be protected. This mount is made to last with a strong, secure build, and easy to use handle. Built with an ergonomic design and increased durability, it has full rotation with a one-click hold and release for quick access and enhanced visibility. Adventure in confidence with the Gearlock Bike Mount.
• Ergonomic and lightweight build with fiberglass core
• Easy locking system with increased stability
• 360-degree rotation for optimized viewing
• Simple one-click hold and release
• Comes with one Universal Adapter

Package includes:

• Mount

Spigen Velo S540W Selfie Stick

• telescopic selfie stick made of aluminium and high quality matte plastic
• bluetooth connectivity
• ergonomic handle ensures a very comfortable grip
• compatible with all Android/iOS devices

The Tech-Protect MMR500 Magnetic MagSafe Phone Ring is a stylish and practical magnetic holder designed for smartphones and cases equipped with MagSafe. Thanks to strong magnets, it holds the device securely, increasing the safety and convenience of everyday use.

The design of the mount allows for smooth adjustment of the tilt angle from 0 to 180°, which makes it easy to adjust the position of the phone while watching videos, working or video calls. The central ring tilts up to a maximum of 90 degrees, allowing you to rest your phone stably on a flat surface or hold it more comfortably in your hand.

The whole thing is made of durable, pleasant to the touch materials that blend well with modern smartphones, while ensuring comfort and functionality in any situation.

The FIXED Leather Case for Airtag is a hand-sewn pendant from Prostejov workshop, designed specifically for your Apple Airtag location chip.

It is made from genuine Italian Torcello cowhide leather in a colorful finish that is soft to the touch, smells great and ages like wine over time.

The case is designed specifically for the smart tag and lets the original Airtag design stand out. Using the steel ring, you can clip it to your keys, purse, or other personal items.

Thanks to the properties of genuine leather and precise handcrafting from Prostějov, you get an original and luxurious accessory that will serve you for many years.

Features:

- Leather case for Apple Airtag
- Stylish accessory for your location chip
- The case is hand sewn with love in Prostejov
- Material: 100% genuine Italian Torcello cowhide leather
- Durable polished steel strap
- Completely made in the Czech Republic
- Apple AirTag locator chip not included

Secure your MiVUE Dash Cam safely with this 3M self-adhesive car cradle.

The Wrist Strap is designed to attach to selected Apple iPhone cases and AirPods Pro for a convenient and hands-free way to carry these products.

Beautifully crafted from 100 per cent recycled PET yarns, the strap is comfortable to wear on your wrist all day.Embedded flexible magnets keep the strap neatly aligned.

Compatible iPhone 18 Pro and iPhone 18 Pro Max cases:

• TechWoven Case with MagSafe
• Silicone Case with MagSafe
• Clear Case with MagSafe

Compatible iPhone 17 Pro and iPhone 17 Pro Max cases:

• TechWoven Case with MagSafe
• Silicone Case with MagSafe

Compatible iPhone 17 cases:

• Silicone Case with MagSafe

Compatible iPhone 17e cases:

• Silicone Case with MagSafe

Compatible iPhone Air cases:

• iPhone Air Bumper
• iPhone Air Case with MagSafe

Compatible AirPods Pro case:

• AirPods Pro 2 or later

Length: 391 mm (15.4 inches)

What’s in the Box
Wrist Strap

Beskyttelsesetui gir en tett, sikker passform for AirPods Pro Gen 3 med førsteklasses soft-touch silikon, et støvdeksel for ladeporten, bevart kompatibilitet med trådløs lading og medfølgende karabinkrok og snor.

KeyBudz Elevate Series Case for AirPods Pro Gen 3 er designet for daglig bæring og bidrar til å beskytte øreproppene dine mot støt og riper, samtidig som ladeporten holdes beskyttet mot støv og rusk. Den konstruerte passformen holder AirPods trygt på plass, og etuiet blir sittende på under trådløs lading.

• Førsteklasses soft-touch silikon-konstruksjon
• Tett og sikker passform for AirPods Pro Gen 3
• Beskyttende støvdeksel for ladeporten
• Kompatibilitet med trådløs lading bevart
• Inkluderer karabinkrok og snor for enkel festing
• Fallbeskyttelse opptil 1 meter

Hold AirPods beskyttet, rene og enkle å bære uansett hvor du går.

Batterikasse

The Tech-Protect MMR300 is a revolutionary finger grip that combines advanced MagSafe technology with comfort and functionality. Made from durable aluminum alloy, this easy-to-use ring mounts to the back of your phone to a compatible MagSafe case or directly to your smartphone.

Its flat design not only protects the device, but also allows you to use it comfortably. The finger holder can play an additional role as a stable base for watching movies or photos, which greatly increases the usability during entertainment.

The third, equally important function is the magnetism of the handle. Thanks to this, it can be used as a connection between the phone and the Magsafe magnetic holder, which allows you to safely mount the device, e.g. in a car, without having to hold it in your hand.

The mount is extremely easy to install and leaves no traces when it is removed, allowing you to use wireless charging without any problems. The Tech-Protect MMR300 Magsafe Phone Ring is the perfect solution for those who are looking for a convenient and multifunctional way to use their phone.

The Dudao F24PLUS car mount is designed for maximum stability and comfort of use while driving. It uses vacuum mount technology that provides a very strong and secure suction to the dashboard. The robust construction and precise locking mechanism effectively reduce the vibrations and movement of the phone. Multi-plane adjustment allows you to conveniently position the screen at the right angle. It is a solution created for everyday, intensive use in the car.

Ørepute (en pakke 2)

Equipped with tougher-than-tough ceramic glass and a beautiful titanium frame, this PanzerGlass® Hoops® camera lens protector protects your lenses, while looking great! Scratch-creating bumps, drops on stone-hard floors, and other hazards of everyday life are no match for these slim profile optic rings. There’ll be no “Oops!” with Hoops®! And if you’re worried about image distortion, rest easy: Hoops® don’t affect the clarity of your lenses or the quality of your photos – they just give you a bit more peace of mind.  

Hoops® protect and prolong the lifetime of your phone so that one day you can pass it on to someone else who will love it just as much as you do. It’s the new circle of phone life. By extending the lifespan of our devices, we postpone the need to produce new devices. This is one way of working toward a more sustainable future. Another is to use less packaging: In 2024, we reduced the amount of paper in our PanzerGlass® core product packaging design by an average of 66 %*. And of course, we continue to deliver all our products in recyclable FSC™-certified boxes. 

The optic rings are designed for easy application and perfect fit. They are equipped with a silicone adhesive along the edges and come with an easy-to-use applicator that makes installation a piece of cake (seriously!). And remember: Once installed, you’ll never again fear your phone falling camera-first. This might not happen, but then again … it might! 

*Reduction from 2022-2024 measured by comparing selected products from the PanzerGlass® core range. 

Wireless microphone with Lightning connector. Looking for a simple yet effective way to improve the sound quality of your videos? Look no further than our Wireless Lavalier Microphone, USB Lightning! This lightweight microphone is perfect for broadcasting live interviews, recording short videos such as moves and tricks or to create TikToks. In addition, it can be easily clicked onto any shirt and its long-lasting battery provides up to 10 hours of operating time. If you want great sound reception with minimal interference from your surroundings, you'll be thrilled with this microphone's high sensitivity. It also has a filter built around it so your sound is crystal clear. So don't hesitate - upgrade your sound quality with our Wireless Lavalier Microphone, USB-C today! Advantages of Lippa wireless microphone with Lightning connector for iPhone. Connects quickly to your Lightning device with included receiver. Get better sound in your recordings - e.g. while filming, interviewing, making tiktok, instagram, youtube and much more.

Smarttelefonholder til bilens luftventil Crong Carclip Air Vent i svart kombinerer en slitesterk metallkrok med låsesystem, justerbare armer og et 360° roterende hode for stabil montering i bilen.

Crong Carclip Air Vent er et kompakt luftventilfeste designet for rask montering på horisontale eller vertikale rister uten å begrense luftstrømmen, med gummiputer for et fast grep og en dobbeltsidig utløsermekanisme for enkel fjerning av telefonen med én hånd.

• Sikker ventilmontering: Metallkrok og låsesystem for stabilt feste
• Universell passform: Fungerer med horisontale og vertikale luftventiler
• Justerbare armer: 55–101 mm som passer de fleste smarttelefoner
• Klemmeområde for ventil: 10.5–31.5 mm for kompatibilitet med ulike bilmodeller
• 360° bevegelig hode: Juster og lås synsvinkelen for navigasjon, samtaler eller multimedia
• Støtdempende, antiskli-design: Bidrar til å beskytte mot vibrasjoner og ujevne veier
• Enkel kabeltilgang: Koble til og lad telefonen mens den står i holderen

Hold telefonen sikkert plassert og lett å se, med smidig daglig håndtering på hver kjøretur.

Spigen AirSkin Shield HD

• Precisely designed to fit AirTags
• Matte surface finish
• Protects your AirTag from wear & tear by preventing scratches or dirt build up
• Compatible with all Spigen cases designed for AirTag

3MK Magnet Power Car Holder

Rengjøringssett for ørepropper med fire rengjøringsverktøy og forhåndsporsjonert rengjøringsmasse for å fjerne støv og fett fra ørepropper, ladeporter, mikrofoner, høyttalere og andre små åpninger.

Mobile Origin Cleaning Kit for Earphones CL2 leveres i en metallboks og rengjør mekanisk ved adhesjon, uten vann, løsemidler eller kjemikalier, noe som bidrar til å unngå fuktrelaterte skader på sensitiv elektronikk.

• Inkluderer presisjonsspiss, rengjøringsbørste, krok/probe og hvit nylonbørste
• Tre blokker med rengjøringsmasse gir opptil 96 porsjonerte bruk
• Massen når rister, porter og sprekker der en børste ikke kommer til
• Ftalatfri masse bekreftet av SGS-testing i henhold til REACH
• Egnet for ørepropper, AirPods, USB-C- og Lightning-porter, mikrofoner, høyttalere, bærbare PC-er, tastaturer og gamepads

CL2-settet holder åpninger på hverdagsenheter renere med kompakte, organiserte verktøy og tørr, restfri rengjøring når det brukes riktig.