iOttie Mobil - Andre tilbehør

• Fifth generation of the top car mount by iOttie
• Universal car mount with air vent attachment
• Patented One Touch technology allows you to easily mount your device
• 360° rotation and landscape/portrait viewing angles
• Compatible with devices up to 9,2 cm in width
• Bigger foam grips protect your phone from scratches
• Magnetic Cord Organizer - you can keep your charging cables neatly stored away and free from entanglement
• Secure installation with new and improved Twist Lock

• 2 pcs metal replacement pads to hold your mobile device in iOttie iTap 2 Wireless Holders
• plates are made of aluminum
• protective foil under the plate is included

Package includes:

• 2 pcs metal plates
• 1 pcs protective foil under plate

• Fifth generation of the top car mount by iOttie
• Patented One Touch technology allows you to easily mount your device
• Improved telescopic arm extends from 12,7 cm to 20,32 cm
• 360° rotation and landscape/portrait viewing angles
• Bigger foam grips protect your phone from scratches
• Magnetic Cord Organizer - you can keep your charging cables neatly stored away and free from entanglement
• Compatible with devices up to 9,2 cm in width
• Improved Suction Cup gel provides stronger hold

New and reworked generation of popular car holder iTap

Monitor MagSafe Mount for iPhone

• The Terus Monitor Mount is a MagSafe compatible iPhone mount that seamlessly attaches to the back of your Tesla touchscreen, vehicle monitor, or home desktop. Simply tap your iPhone against the soft silicone mounting face and powerful magnets will form a secure connection.
• The Monitor Mount gives you quick access to your iPhone on the road or in the office with a minimalist design that doesn’t compromise on style. Featuring a swivel arm and rotating ball joint, it’s easy to find your ideal viewing angle in portrait or landscape mode.
• Whether you need to check traffic patterns during your morning commute or make a video call from the home office, the Terus Monitor Mount makes it simple.

• The Velox™ Air Vent Mount is a magnetic phone mount for MagSafe Compatible iPhones and cases. Just place your device against the Velox Mount, and it will snap into place in perfect alignment for a secure hold. The Velox Air Vent Mount is easily installed by simply sliding the prongs onto the air vent blade, where silicone grips prevent it from slipping. The ball joint on the air vent mount rotates 360° while allowing you to adjust the cradle for an ideal and safe viewing position while you drive. The siliconized surface provides added grip to prevent your phone from slipping, while also protecting your iPhone from scrapes and scratches. Now it's easier than ever to mount your phone and hit the road!
• Designed for MagSafe iPhone series and cases

Quick and Easy Installation

• Simply slide the prongs onto the air vent blade, the silicone texture prevents the mount from slipping

Fully Adjustable Viewing

• Super strong ball joint allows the Velox Air Vent Mount to be easily adjusted to the optimal viewing angle for you

Powerful Magnetic Connection

• Keep your phone securely connected, even on rough roads

Technical Specifications:

• SLIM & ELEGANT PROFILE: The Velox Air Vent Mount has a compact design that complements the style of any vehicle's interior
• POWERFUL MAGNETIC HOLD: Your MagSafe compatible iPhones and cases will be held securely in place even on rough roads.
• *ONLY Compatible with MagSafe iPhone series and cases!
• EASY INSTALLATION: Silicone prongs provide a vice-like grip, and allow the mount to be installed quickly and securely.
• FUNCTIONAL DESIGN: The Velox Air Vent Mount has a soft silicone face for added grip and protection against scrapes and scratches.
• FLEXIBLE VIEWING ANGLES: The Velox Air Vent Mount has a rotating ball joint that allows you to adjust the angle of your iPhone for an optimal view.

Package includes:

• Velox Magnetic Air Vent Mount

• universal car and desk holder
• easy one-touch mounting of your smartphone to the iOttie holder
• the holder allows wireless charging of mobile device - Qi Wireless certification
• wireless charger power 5W - 10W
• 360° rotation
• the foam grips protect your phone from scratches
• the mount can holds a device with a width of 5.84 cm up to 9.5 cm
• super strong suction cup installation on smooth or textured surfaces
• expandable and shock absorbing telescopic arm
• some dashboards may have a squeeze or silicone imprint that disappears after a few weeks due to the sun

Package includes:

• holder

• Fifth generation of the top car mount by iOttie
• Universal car mount with CD slot attachment
• Patented One Touch technology allows you to easily mount your device
• 360° rotation and landscape/portrait viewing angles
• Compatible with devices up to 9,2 cm in width
• Bigger foam grips protect your phone from scratches
• Magnetic Cord Organizer - you can keep your charging cables neatly stored away and free from entanglement

Package includes:

• mount

New and reworked generation of popular car holder iTap

• elegant and powerful magnetic holder
• new and improved generation of very popular iOttie iTap holders
• the design of the mount features two powerful rare-earth magnets that work with a metal plate system to hold smartphones securely in various road conditions
• a very strong magnet ensures 100% holding the mobile device in the holder
• magnet does not cause mobile or internet signal interference
• universal car mount with dashboard or windscreen mounting
• suction Cup with sticky gel and dashboard pad for a secure hold
• easy attachment and release to the magnet
• includes two metal plates (1 mm) and protective film for wireless charging and non-wireless charging enabled smartphones
• some dashboards may have a squeeze or silicone imprint that disappears after a few weeks due to the sun

Package includes:

• 2 pcs metal plates
• holder

• the semi-permanent adhesive dashboard pad firmly grips curved and textured dashboards
• pad will perform even in cold or hot environments
• easy to install the pad that allows you to attach the mount to the dashboard and other surfaces in the car
• some dashboards may have a squeeze or silicone imprint that disappears after a few weeks due to the sun
• one time use only

Package includes:

• pad

• universal car mount with dashboard or windshield mounting
• elegant and compact design
• easy one-touch mounting of your smartphone to the iOttie holder
• the holder allows wireless charging of mobile device - Qi Wireless certification
• wireless charger power - 10W Android, 7,5W iPhone
• super strong suction cup installation on smooth or textured surfaces
• suction cup that can only be reused by rinsing with water
• 360° rotation
• the foam grips protect your phone from scratches
• the mount can holds a device with a width of 5.84 cm up to 9.5 cm
• expandable and shock absorbing telescopic arm from 12,45 cm up to 21,1 cm
• some dashboards may have a squeeze or silicone imprint that disappears after a few weeks due to the sun

Package includes:

• holder
• dual car charger with micro-USB
• dashboard pad

Bilholder for mobiltelefon, svart

• The Velox Mount is a magnetic phone mount for MagSafe Compatible iPhones and cases. Just place your device against the Velox Mount, and it will snap into place in perfect alignment for a secure hold. The ball joint on the air vent mount rotates 360° while allowing you to adjust the cradle for an ideal and safe viewing position while you drive. The siliconized surface provides added grip to prevent your phone from slipping, while also protecting your iPhone from scrapes and scratches. Now it's easier than ever to mount your phone and hit the road!
• Designed for MagSafe iPhone series and cases.

Quick and Easy Installation

• Adhesive base for secure attachment.

Fully Adjustable Viewing

• Super strong ball joint allows the Velox Mount to be easily adjusted to the optimal viewing angle for you.

Powerful Magnetic Connection

• Keep your phone securely connected, even on rough roads.

Technical Specifications:

• SLIM & ELEGANT PROFILE: The Velox Mount has a compact design that complements the style of any vehicle's interior
• POWERFUL MAGNETIC HOLD: Your MagSafe compatible iPhones and cases will be held securely in place even on rough roads.
• *ONLY Compatible with MagSafe iPhone series and cases!
• FUNCTIONAL DESIGN: The Velox Mount has a soft silicone face for added grip and protection against scrapes and scratches.
• FLEXIBLE VIEWING ANGLES: The Velox Mount has a rotating ball joint that allows you to adjust the angle of your iPhone for an optimal view.

Designed exclusively for Qi2-enabled devices including MagSafe series iPhones and cases

• elegant and powerful magnetic holder
• new and improved generation of very popular iOttie iTap holders
• the design of the mount features two powerful rare-earth magnets that work with a metal plate system to hold smartphones securely in various road conditions
• a very strong magnet ensures 100% holding the mobile device in the holder
• magnet does not cause mobile or internet signal interference
• twist lock securely tightens onto most vehicle air vents for quick and easy installation
• includes two metal plates (1 mm) and protective film for wireless charging and non-wireless charging enabled smartphones

Package includes:

• 2 pcs metal plates
• holder

New and reworked generation of popular car holder iTap

• holder for bike is designed to secure your device safely to enhance your riding experience
• compatible bicycles and motorcycles with bars 20-34mm
• easy one-touch mounting of your smartphone to the iOttie holder
• mount holds all smartphones and cases between 5,84 cm - 8,9 cm
• mount rotates 360° for optimal viewing angles
• safety strap helps keep smartphone securely mounted

Package includes:

• holder

• patented Easy One Touch mechanism allows quick one hand open and close operation
• it is recommended to buy Sticky Gel Dashboard Pad ACDPIO201for attaching to the dashboard
• easy one-touch mounting of your smartphone to the iOttie holder
• 360° rotation
• the foam grips protect your phone from scratches
• the mount can holds a device with a width between 5,84 cm - 8,9 cm
• super strong suction cup installation smooth or textured surfaces
• expandable and shock absorbing telescopic arm
• the bottom section allows access to all mobile device ports
• some dashboards may have a squeeze or silicone imprint that disappears after a few weeks due to the sun

Package includes:

• holder