A universal safety relay for many safety applications. Relay outputs 3NO/1NC

metal safety switch XCSA 2 NC + 1 NO slow break 1 entry tapped M20

coded magnetic switch XCSDMP SIL 3 2 NC+1 NO, 1 NC staggered cable 5m

JSTD1-B Safeballs each have 1NO & 1NC independent switches, maximum load of 30VDC - 2A resistive. Ergonomic design with several grip possibilities and low activation force (approx. 2N) and flexible mounting options. Provides highest level of safety for use in two hand control applications when using two Safeballs in conjunction with a JSBR4 safety relay or Pluto Safety PLC. IP67 protection degree, plastic body, 0.2m wires x 4 for direct connection into an enclosure.

red galvanised cable Ø 3.2 mm L 50.5 m for XY2C

Preventa XPS MCM safety controller is a modular safety controller there can handle up to 128 safety signals and 16x2 safety output signals. The controller shall be programmed, from the free configuration software SoSafe. XPSMCMCP0802 is a Modular Safety Controller containing eight safety-related inputs and two safety-related outputs (four physical channels), which can be configured using SoSafe Configurable software. In addition, the Modular Safety Controller can be combined with anumber of expansion modules through the backplane expansion bus.

1NO, 1NC after 1NO Slow-action 3 step

1NO, 1NC Slow-action

A universal safety relay for many safety applications. Relay outputs 2NO

metal safety switch XCSLF 4 NC+ 2NOslow break 1 entry tapped M20 24V

Plastic safety switch XCSTE 2 NC slow break 1 entry tapped M16 24 V

metal safety switch XCSE 2NC+1NO slow break2entries tapped M2024V

coded magnetic switch XCSDMP SIL 3 1 NC+2 NO, 1 NO staggered cable 10m

Pull rope switch XY2CD111 NO+NC

e-stop rope pull switch XY2CE RH side2NC+2NO reset button

The Preventa XPS Universal safety modules comes with a number of technical features.It has protection against unintended changes with the transparent cover at the front face to prevent changes of the functional settings of the selector switches.XPSU is easy to install, it has side connection for extension unit, no need for external wiring (except XPSUAB and XPSUEP).Preventa XPS Universal comes with a wide time setting area, time delay is selectable from 0.1 to 900 seconds for low and high inertia machines.Only 2 supply variants for all references: 24V AC/DC + wide range power supply 48...240V AC/DC Preventa XPSU combines the simplicity of application of hardwired safety modules with a diversity of messages.With a simple point-to-point connection, Preventa XPS Universal safety modules can send more than 40 different messages! XPSUS safety modules are designed to monitor two hand control stations IIIA or IIIC which must comply with International standard ISO 13851. With automati

e-stop rope pull switch XY2CE RH side2NC+2NO reset button

fixed cable support for XY2C

turnbuckle M6 for XY2C

1NO, 1NC Slow-action

40-70N 1NO før 1NC, Slow-action

Controller with 8 inputs 2 outputs monitors expansion modules and spring term

coded magnetic switch XCSDMP SIL 3 1 NC+2 NO, 1 NO staggered cable 2 m

plastic safety switch XCSPA 1 NC + 1 NO slow break 1 entry tapped M16

coded magnetic switch XCSDMP SIL 3 1 NC+2 NO, 1 NO staggered cable 5 m