Komponenter for switchboxes og skap - side 52

Tilbehør til bryter

SA 1 Låseinnretning for MCB, uten hengelås

Block Contactor Accessories

HF4B 600/5A KL 0.2S/0.2 5/7.5VA Strømtransformator Produktbeskrivelse: HF4B 600/5A KL 0,2S / 0,2 5 /7,5 VA strømtransformator. IEC61869-2, CE-merket, Kema-Keur godkjent og UL94 V-0 klassifisert. Bruksområde: Fakturering

Klemme for montering på skinne, HF3A og HF3B Produktbeskrivelse: Klemme for montering på skinne, HF3A og HF3B, 1 stk per pose.

Sikringsholder, LV, 25 A, AC 500 V, D2, IEC, CD27

HF3B 200/5A KL 0.5/1/3 1 /2.5 /3VA strømtransformator Produktbeskrivelse: HF3B 200/5A KL 0,5 /1 /3 1 /2,5 /3VA strømtransformator. IEC 61869-2, CE-merket, Kema-Keur godkjent, UL94 V-0 vurdert. Bruksområde: display.

HF4B 300/5A KL 0.5/1/3 7.5 /10 /15VA Strømtransformator Produktbeskrivelse: HF4B 300/5A KL 0,5 /1 /3 7,5 /10 /15VA strømtransformator. IEC 61869-2, CE-merket, Kema-Keur godkjent og UL94 V-0 klassifisert. Bruksområde: visningsformål.

ABB 1SAM250000R1004 nødutgang lampe

PFI-relé 63A 3P+N 30mA Type B

Circuit breaker QSA160N1 DIN00 without handle Product description: Fuse switch type QSA Box size 1

Tilbehør til bryter

B6-30-10 mini kontaktoren er en kompakt 3-pol kontaktor med 1 hjelpekontakt og skrutilkoblinger. De egner seg ideelt for applikasjoner der pålitelighet er et must og plass er begrenset. Mini-kontaktorer brukes i boligbygg, næringsbygg og industrielle applikasjoner for kontroll av enkel eller trefasebelastninger opptil 4 kW (AC-3) og 20 A / 690 V (AC-1) eller bytting av kontrollsignaler. Videre funksjoner inkluderer stille spole, bryterposisjonsindikasjon og integrert mulighet for skinne eller veggmontering.

HF4B 400/5A KL 0.5/1/3 7.5/10/15VA Current Transformer Product Description: HF4B 400/5A KL 0.5/1/3 7.5 /10 /15VA current transformer. IEC 61869-2, CE marked, Kema-Keur approved, UL94 V-0 rated. Application: display/viewing purposes.

DEVIreg TM 330 is a series of simple electronic thermostats for installation in cabinets withDIN rail bracket. To measure and control the desired temperature, either one must be usedwiring sensor (in the kit) or an external or space sensor. The thermostat must be installedafter a multi-pole switch. It has an LED indicator that shows standby periods (green light) andheating periods (red light).DEVIreg TM 330 has a relay with two contact pairs - NO (normally open) and NC (normally closed) andis intended to be used for heating and cooling systems. In addition, the NO and NC contact pairsnot supplied by a voltage source inside the thermostats and can be used forcontrol systems with any voltage up to 250 V.The series is designed with thermostats in three temperature ranges.DEVIreg TM 330 (-10 - +10 ° C) is primarily used to control a lower temperature range such asantifreeze. This thermostat has a knob for adjusting the temperature setting with a scalefrom -10 to +10 ° C. Special outdoor wire with white wire, 2,5m, is included in a set.

Fuse for protection against short circuits and protection of wires and cables so that they do not use so much current that it can ignite the connected material.

Overstrømsbryter, 13A, 1pol+N, type C karakteristikk

SAFTY SWITCH 63A, AC23, 3P+NGrey/Black, IP56 = Sikkerhetsbryter 63A, AC23, 3P+NGrå/Svart, IP56

Humfree contactor 25A 4NO 230V Humfree for the control of circuitsGuarenteed silence during the entire life of the productCan be equipped with auxiliary contact and sealig capsRated operational voltage: 400 V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 2According to standard: EN 61095

MCB 1P 6KA C-10A 1M

MCB 1P 6KA C-6A 1M

sikringsholder - GA -1 bryter - 10 A - rød

sikringsholder - GA -1 bryter - 13 A - svart

Contactor 25A 1NO+1NC 230V Standard for the control of circuitsCan be equipped with auxiliary contact and sealig capsRated operational voltage: 230 V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 1According to standard: EN 61095

Contactor 25A 1NO 230VAC Standard for the control of circuitsCan be equipped with auxiliary contact and sealig capsRated operational voltage: 230 V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 1According to standard: EN 61095