Komponenter for switchboxes og skap - side 5

DEVIreg TM 330 er en serie med enkle elektroniske termostater for installasjon i skap med DIN-skinnebrakett. For å måle og kontrollere ønsket temperatur, må enten en ledningssensor (i settet) eller en ekstern eller romsensor brukes. Termostaten må installeres etter en flerpol bryter. Den har en LED-indikator som viser ventetider (grønt lys) og oppvarmingsperioder (rødt lys). DEVIreg TM 330 har et relé med to kontaktsett - NO (normalt åpen) og NC (normalt lukket) og er ment å brukes til varme- og kjølesystemer. I tillegg blir ikke NO- og NC-kontaktsettene levert av spenningskilden inne i termostatene, så de kan brukes for kontrollsystemer med hvilken som helst spenning opptil 250 V. Serien er designet med termostater i tre temperaturområder.DEVIreg TM 330 (5-45 ° C) brukes primært for å kontrollere et lavere temperaturområde, som frostbeskyttelse, samt for kjøling, komfort gulvvarme, total direkte undergulvvarme , is-og snesmelting på bakken , frostbeskyttelse på tak , rørbeskyttelse osv.Termostaten har en knapp for justering av temperaturen fra 5 ° C til 45 ° C.Denne typen har temperaturfall i økonomiperiode-modus ved hjelp av ekstern timer.

DEVIreg TM 316 er en enkel, elektronisk termostat med forbedret installasjonsfunksjonalitet i skap med DIN-skinnefester. Termostaten brukes primært til frostbeskyttelse på tak, takrenner og nedløpsrør. I tillegg kan den brukes til å kontrollere rom- og gulvtemperatur, ventilasjon, kjøling eller snøsmelting på bakken, rørhegn og lignende installasjoner. De viktigste egenskapene til termostaten er temperaturinnstillingsområdet - med innstilling av både øvre og nedre temperaturer mellom hvilke termostaten tillater systemet å varme opp. Denne modusen brukes primært for å kontrollere frostbeskyttelsessystemer på tak, takrenner og nedløp (en ekstern utendørsluftsensor må brukes). Termostaten er utstyrt med to ekstra knapper for justering av hysterese og temperaturverdi for bruk i økonomiperioder (en ekstern timer kreves). Termostaten har et relé med to kontaktsett - NO (normalt åpen) og NC (normalt lukket), og den er ment å bruke termostaten for varme-og kjølesystemer. I tillegg blir ikke NO-og NC-kontaktsettene strømforsynt av en spenningskilde innenfor termostaten, slik at de kan brukes for kontrollsystemer med hvilken som helst spenning opptil 250 V. Den er designet slik at sensorkretsen galvanisk er separert fra høyspenningsdelen.

Digital tidsbryter med ukentlig program. Programmering utføres på enheten. Korte instruksjoner i oppbevaringsrommet for installasjon på TH35 DIN-skinner i henhold til EN 60715Funksjoner: 56 minnelokasjoner ON/OFF-brytetider Bryteforvalg ON/OFF permanent bryting Manuell bryting Feriemodus Veksling mellom sommertid/vintertid: -automatisk, kan deaktiveres, veksle regler for Europa, USA og andre land er allerede lagret, tilpassede veksle regler eller veksling på en fast dato kan velges PIN-koding

Modulær sikkerhetstransformator iTR - 230 V 50...60 Hz - utgang 12...24 V - 25 VA

iCT 16A 2NO 230...240V 50Hz kontaktor

Schneider Electric A9A15310 uttaksboks

This Acti9 iTLc is a modular and reliable impulse relay. This 1P device has 1 normally open contact. The rated current is 16A, 24VAC to 250VAC operating voltage and it operates with 230VAC to 240VAC control voltage. Electrical endurance goes up to 200000 cycles for AC-21 or 100000 cycles for AC-22. The switching frequency is 100 switching operations/day or 5 switching operations/minute. The duration of the command order should be between 50ms to 1s. The degree of protection is IP20 and IP40 in an enclosure. It is DIN rail mountable. It is mainly used for lighting control applications. It allow centralized control of a group of impulse relays whilst keeping local individual control of each impulse relay. This product is compliant with IEC/EN 60669-1, IEC/EN 60669-2-2.

Siemens 5SL6520-7 strømkretsbryter Miniatyr-automatsikring 2

This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 3P circuit-breaker with 3 protected poles, 50A rated current and C tripping curve. It can be mounted on DIN rail for modular installation. As circuit-breaker, its breaking capacity, according to IEC/EN 60898-1, is 6000A at 400VAC. As circuit-breaker, its breaking capacity, according to IEC/EN 60947-2, is 20kA at 230VAC and 10kA at 400VAC. This miniature circuit breaker protects circuits against short circuit and overload currents. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. It becomes IP40 once in modular enclosure with insulation class II. its fast closing mechanism improves its service life. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. Its unique Visitrip indicator reduces intervention time by showing the faulty circuit. Its Visisafe green strip guarantees the physical opening of the contacts to allow downstream maintenance.

AF26 contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF... contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF contactors have built-in surge protection and do not require additional surge suppressors. The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available.

This Acti9 iTL is a modular and reliable impulse relay. This 2P device has 2 normally open contacts. Rated current is 16A, 24VAC to 250VAC operating voltage and it operates with 24VAC or 12VDC control voltage. Electrical endurance goes up to 200000 cycles AC-21 or 100000 cycles AC-22. The switching frequency is 5 switching operations/minute or 100 switching operations/day. The duration of the command order should be between 50ms to 1s. The degree of protection is IP20 and IP40 in an enclosure. It is DIN rail mountable. It is mainly used for lighting control applications. This product is compliant with IEC/EN 60669-1, IEC/EN 60669-2-2. This product benefits from Schneider Electric expertise with more than 40 years developing modular devices for all type of applications. It has a longer service life thanks to its high limitation and fast closing. This product is compliant with IEC 669-1, IEC 669-2-2, IEC 60529, has IP20 on opening, IP40 in an enclosure and is DIN rail mountable. Ideal for lighting control applications, for example control of a light with more than 3 switches in a living room or a corridor. . Ideal for lighting control applications, for example control of a light with more than 3 switches in a living room or a corridor. High rated current capability in a small package: control many lighting circuits without increasing the size of your panel. Up to 200000 cycles endurance: even with 100 switching cycles per day, the contactor will last more than 5 years. Can switch even with very short 50 ms impulses: your lighting circuit will switch on, no matter how briefly the user pushes the light button.

Schneider Electric C60SP strømkretsbryter 2P

Frontbetjent bryter-disconnector. Typer OT 16...125 inkluderer beskyttede terminalklemmer, IP 20.

Interpact kretsbryter 4P

Tidsrelé, forsinket påslag, 1 veksler, tidsområde 5 s...100 s, ac 24/230 v og dc 24 v, med led-lys

Schneider Electric A9F04613 strømkretsbryter 1

Schneider Electric Linergy DX elektriske kabinett

Automatisk endring av sommer- og vintertid, 2 byttekontakter, dansk meny, 2 moduler for DIN-skinne M36

This Acti9 iTL is Schneider Electric's modular and reliable impulse relay. It has 2 normally open contacts, is rated 16 amperes and operates with 230 - 240VAC or 110VDC impulse control signal. This product benefits from Schneider Electric expertise with more than 40 years developing modular devices for all type of applications. It has a longer service life thanks to its high limitation and fast closing. This product is compliant with IEC 669-1, IEC 669-2-2, IEC 60529, has IP20 on opening, IP40 in an enclosure and is DIN rail mountable. Ideal for lighting control applications, for example control of a light with more than 3 switches in a living room or a corridor. . Ideal for lighting control applications, for example control of a light with more than 3 switches in a living room or a corridor. High rated current capability in a small package: control many lighting circuits without increasing the size of your panel. Up to 200000 cycles endurance: even with 100 switching cycles per day, the contactor will last more than 5 years. Can switch even with very short 50 ms impulses: your lighting circuit will switch on, no matter how briefly the user pushes the light button.

FI/LS kombinasjonsbryter, 10A, 30mA, C-LS-Char, 3N poler, FI-Char: A

Schneider Electric A9S65240 ikke kategorisert

System pro M compact S200 miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 and CSA 22.2 No. 235, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200 to save 50% space.

Schneider Electric iID strømkretsbryter 2P

DEVIreg TM 330 is a series of simple electronic thermostats for installation in cabinets withDIN rail bracket. To measure and control the desired temperature, either one must be usedwiring sensor (in the kit) or an external or space sensor. The thermostat must be installedafter a multi-pole switch. It has an LED indicator that shows standby periods (green light) andheating periods (red light).DEVIreg TM 330 has a relay with two contact pairs - NO (normally open) and NC (normally closed) andis intended to be used for heating and cooling systems. In addition, the NO and NC contact pairsnot supplied by a voltage source inside the thermostats and can be used forcontrol systems with any voltage up to 250 V.The series is designed with thermostats in three temperature ranges.DEVIreg TM 330 (-10 - +10 ° C) is primarily used to control a lower temperature range such asantifreeze. This thermostat has a knob for adjusting the temperature setting with a scalefrom -10 to +10 ° C. Special outdoor wire with white wire, 2,5m, is included in a set.

Schneider Electric LC1D18P7 hjelpekontakt