Komponenter for switchboxes og skap - side 15

iC60N - miniatyrkretsbryter - 2P - 16A - D-kurve

Acti9 IC60 RCBO 2P 13A 30mA C 10kA A. For beskyttelse av endekrets og beskyttelse av mennesker mot elektrisk støt ved direkte kontakt (30 mA). Samt jordfeil på frontplaten

This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 3P circuit-breaker with 3 protected poles, 16A rated current and B tripping curve. It can be mounted on DIN rail for modular installation. As circuit-breaker, its breaking capacity, according to IEC/EN 60898-1, is 6000A at 400VAC. As circuit-breaker, its breaking capacity, according to IEC/EN 60947-2, is 20kA at 230VAC and 10kA at 400VAC. This miniature circuit breaker protects circuits against short circuit and overload currents. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. It becomes IP40 once in modular enclosure with insulation class II. its fast closing mechanism improves its service life. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. Its unique Visitrip indicator reduces intervention time by showing the faulty circuit. Its Visisafe green strip guarantees the physical opening of the contacts to allow downstream maintenance. This double terminal miniature circuit breaker reflects Schneider Electric expertise with more than 40 years developing modular devices for the protection of electrical circuits in all applications. It has a longer service life thanks to its high limitation and fast closing. This product is compliant with both IEC 60898-1 and IEC 60947-2, has IP20B finger proof terminals with double the tightening torque versus the standard and is DIN rail mountable. It offers VisiTripTM for safety during maintenance and VisiSafeTM to reduce intervention time.

PowerTags er energisensormoduler for 1P + N, 3P og 3P + N nettverk. De monteres direkte på enheter i iC40-serien med modulbredde på 18 og 54 mm opptil 63A, og R9 Flex med en ledning på 15 cm for måleenheten. Kombinert med FESB Facility Expert Small Business via radiofrekvenskommunikasjon Zigbee, måler PowerTag-sensorer kWh-verdien i samsvar med IEC-standarden 61.557-12. Akkumulert aktiv energiforbruk i kWh.

bryter-disconnector VCD - TeSys - 3 poler - 690 V 32 A - låsbar rød håndtak

Siemens 6EP1961-2BA41 elektrisk relé

Siemens 3RH2911-2HA22 ikke kategorisert

Siemens 3RH2911-1HA31 hjelpekontakt

Siemens 3RH2911-1HA22 hjelpekontakt

Siemens Hilfsschalterblock 1S+3OE 3RH2911-1HA13 hjelpekontakt

Siemens 3RV2021-1GA10 ikke kategorisert

Siemens 3RM1202-1AA04 ikke kategorisert

Siemens 3RT2926-1CD00

Siemens 3RH2140-1AP00 ikke kategorisert

Siemens 3RT2916-1EH00 ikke kategorisert

Siemens 3RH2131-1BB40 elektrisk relé

Zelio RSB are a series of compact plug-in relays with a width of only 16 mm.The relays are available with 1 C/O with either 12 and 16A or 2 C/O contacts with 8A maximum load.It is possible to insert a protection module (diode, varistor or RC-circuit) into the relay socket if needed.The sockets RSZE1S35M and RSZE1S48M has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RSB2A080JDPV is a complete plug-in relay mounted into a RSZE1S48M socket with a maintaining clamp, which secure that the relay stays in the socket even in an environment with vibrations.The socket has a blocking diode for protection against reversed polarity.The diode module has also a build-in LED for indication of supply to the relay.RSB2A080JDPV has 2 C/O AgNI contact with a maximum load of 8A.The relay has a lifetime of 100.000 cycles (depending on load).Supply voltage to the RSB2A080JDPV is 12 VDC and average coil consumption is 0,45W.Minimum switching curr

Schneider Electric RE22R2AMR ikke kategorisert

Schneider Electric RXZE2S114M tilbehør til terminalblokk 1 stykker

Schneider Electric RPM12BD ikke kategorisert

Zelio RSB are a series of compact plug-in relays with a width of only 16 mm.The relays are available with 1 C/O with either 12 and 16A or 2 C/O contacts with 8A maximum load.It is possible to insert a protection module (diode, varistor or RC-circuit) into the relay socket if needed.The sockets RSZE1S35M and RSZE1S48M has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RSB1A120P7PV is a complete plug-in relay mounted into a RSZE1S35M socket with a maintaining clamp, which secure that the relay stays in the socket even in an environment with vibrations.The socket has a varistor interserted for protection against voltage spikes generated by coils in the panel.The varistor module has also a build-in LED for indication of supply to the relay.RSB1A120P7PV has a 1 C/O AgNI contact with a maximum load of 12A.The relay has a lifetime of 100.000 cycles (depending on load).Supply voltage to the RSB1A120P7PV is 230 VAC and average coil co

Schneider Electric RXZR335 ikke kategorisert

Schneider Electric ABL8RPS24100 strømforsyningstransformator

Schneider Electric LC1D65AB7 hjelpekontakt

TeSys GV4 stands out by being both compact and high performance. The device is intended for mounting on DIN rail and is only 81 millimeters wide. Nevertheless, the rated current rises up to 115A and has three breaking levels of 25, 50 or 100 kA.In addition, TeSys GV4 offers both operating classification 10 (normal start) and 20 (heavy start). This makes it the obvious choice for a multitude of different applications, regardless of the specifics of the individual application.TeSys GV4 is also perfect for machines that need to be exported to customers outside of Denmark. It is therefore certified according to all relevant international standards (UL, JIS, ATAX, CCC, EAC and EU) and therefore approved for use worldwide, including North America and Asia.The motor switch can be used both as a main circuit breaker in a control panel and as an individual protection in front of motors. The smart connection with EverLink terminals ensures that the TeSys GV4 cables are always properly tensioned, even with vibration or motion in the cables.Three types• GV4L: Magnetic switch• GV4P: Thermomagnetic switch with overload setting.• GV4PEM: Thermomagnetic switch with overload setting and advanced protection and alarm Many options - wide application• Only one physical size: 81 mm wide, mounted on DIN rail• Rated current up to 115A, 3P (choose 2, 3, 5, 7, 12, 25, 50, 80 or 115A) up to 55kW (400VAC)• Three levels of break power: 25, 50 or 100 kA (415V)• Dual operation classification: 10 (normal start) and 20 (heavy start)