Schneider Electric Komponenter for switchboxes og skap - side 31

Schneider Electric LC1K09008P7 hjelpekontakt

Schneider Electric LUA1C11 ikke kategorisert

Schneider Electric GV2G

Schneider Electric LP2K0910BD hjelpekontakt

Schneider Electric GVAD1010 hjelpekontakt

Schneider Electric GV2ME strømkretsbryter 3

Schneider Electric RXG22B7 elektrisk relé Sort

Schneider Electric LC1D183BL hjelpekontakt

Zelio RXG is a series of plug-in relays for DIN-rail mounting.With a width of only 16 mm. The relays do not take up valuable space in the panel and the 4 different versions make them suitable for any application.The RXG relays can also be used in socket from different suppliers as the placement of the pins on the relays is identical.The unique test button makes it possible to test and operate without any tool and with just one finger.Zelio RXG is available with both 1 changeover contact for 10A and 2 changeover contacts for 5A loads.It is possible to get RXG in a transparent version or a version with either a test button, LED or both combined.The protection modules (diode, diode + LED, RC-circuit or Varistor + LED) are easilly fitted to the socket and are the same for both RXG, RSB or RXM relays. Legends are available for all RXG or RSB socket which makes it possible to identify both socket and relay.RGZS08 is a busjumper for connecting up to 8 sockets on a DIN-rail in a panel.The pins a slightly bended which makes it easy to mount 2 jumpers in parallel and still have room for the wiring.RGZS08 fits both the RGZE1S35M and RGZE1S48M socket.

Zelio RXG are a series of plug-in relays with a width of only 16 mm and robust faston connectors which is compatible with similar relays from other vendors. The relays are available with 1 C/O contact with 10A or 2 C/O contacts with 5A maximum load and it is possible to get them with or without lockable testbutton and status LED.A protection module (diode, varistor or RC-circuit) can be inserted into the socket if needed.The sockets RGZExxxx has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RGZE08P is a socket with separate push-in terminals that fits with RXG relays with 2 C/O contacts.The socket has a width of 16 mm and protection modules can be inserted directly next to the supply terminals.The integrated holding clip protect the relay from falling out when inserted into the socket.The socket has push-in terminals for easy wiring without the use of any tool and optimum protection against vibrations.The RGZE08P fits all RXG2xxx plug-in relays with 2 C/O contacts.Additional marking of the socket can be done with the RSZL300 legend which is easily mounted on the sockets.Each terminal have room for 2 wires with a wire size between 0,5..1,5 mm2 and there is a integrated test point built into the socket.For connecting more than one socket to the same supply, the RSZS02 jumper is inserted next to the A2 terminal and it works across the ranges.The socket is marked with both NEMA and IEC markings.

Schneider Electric Resi9 MCB strømkretsbryter 3P + N

iC60H - miniatyrkretsbryter - 1P - 10A - B-kurve

IEC / EN 60947-2IEC / EN 60898-1I henhold til de ovennevnte standardene:Kretsbrytere kombinerer følgende funksjoner:- kretsbeskyttelse mot kortslutningsstrømmer- kretsbeskyttelse mot overbelastningsstrømmer,- egnet for isolasjon

iC60N - miniatyrkretsbryter - 3P - 20A - D-kurve

This Acti9 iC60H is a low voltage miniature circuit breaker (MCB). It is a 3P circuit-breaker with 3 protected poles, 32A rated current and C tripping curve. It can be mounted on DIN rail for modular installation. As circuit-breaker, its breaking capacity, according to IEC/EN 60898-1, is 10000A at 400VAC. As circuit-breaker, its breaking capacity, according to IEC/EN 60947-2, is 30kA at 230VAC and 15kA at 400VAC. This miniature circuit breaker protects circuits against short circuit and overload currents. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. It becomes IP40 once in modular enclosure with insulation class II. its fast closing mechanism improves its service life. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. Its unique Visitrip indicator reduces intervention time by showing the faulty circuit. Its Visisafe green strip guarantees the physical opening of the contacts to allow downstream maintenance. This double terminal miniature circuit breaker reflects Schneider Electric expertise with more than 40 years developing modular devices for the protection of electrical circuits in all applications. It has a longer service life thanks to its high limitation and fast closing. This product is compliant with both IEC 60898-1 and IEC 60947-2, has IP20B finger proof terminals with double the tightening torque versus the standard and is DIN rail mountable. It offers VisiTripTM for safety during maintenance and VisiSafeTM to reduce intervention time.

Bryterfrakobler iSW 4P 63A spenning 415VAC kategori AC22A bredde 72mm

iC60N - miniatyrkretsbryter - 1P - 6A - B-kurve

Schneider Electric A9A15322 ikke kategorisert

Schneider Electric ISSW strømkretsbryter

Schneider Electric A9F04710 strømkretsbryter 3

Schneider Electric A9Z51225 ikke kategorisert

Kamskinne 3pol+Neutral 80A 10moduler a 18mm, iID RCD og iC60 kretsbryter N,L1,L2,L3/N,L1,N,L2,N,L3......., RAL7016 230V/400VAC

Schneider Electric LC1D188P7 hjelpekontakt

Schneider Electric GV2G

Schneider Electric ABLM1A24006 strømforsyningstransformator