Schneider Electric Komponenter for switchboxes og skap - side 25

Zelio RXG are a series of plug-in relays with a width of only 16 mm and robust faston connectors which is compatible with similar relays from other vendors. The relays are available with 1 C/O contact with 10A or 2 C/O contacts with 5A maximum load and it is possible to get them with or without lockable testbutton and status LED.A protection module (diode, varistor or RC-circuit) can be inserted into the socket if needed.The sockets RGZExxxx has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RGZE08P is a socket with separate push-in terminals that fits with RXG relays with 2 C/O contacts.The socket has a width of 16 mm and protection modules can be inserted directly next to the supply terminals.The integrated holding clip protect the relay from falling out when inserted into the socket.The socket has push-in terminals for easy wiring without the use of any tool and optimum protection against vibrations.The RGZE08P fits all RXG2xxx plug-in relays with 2 C/O contacts.Additional marking of the socket can be done with the RSZL300 legend which is easily mounted on the sockets.Each terminal have room for 2 wires with a wire size between 0,5..1,5 mm2 and there is a integrated test point built into the socket.For connecting more than one socket to the same supply, the RSZS02 jumper is inserted next to the A2 terminal and it works across the ranges.The socket is marked with both NEMA and IEC markings.

This MicroLogic 2.2 is a 3 poles 3d electronic trip unit used on ComPacT NSX 250 circuit breakers. This 250A rating electronic trip unit is an optimum choice for all standard and specific applications. It embeds an adjustable long time protection against overloads. It provides also an adjustable short-time protection and a fixed instantaneous protection against short-circuits. MicroLogic 2.2 indicates overloads with Alarm LEDs. The green Ready LED flashes if the circuit breaker is ready to trip. This product is part of our EcoStruxure Power architecture if associated with PowerTag NSX and ComPacT NSX basic frame.

TeSys GV3 motor protection 3P, 62-73A, <= 690V AC. GV3P73 serves as circuit breaker and provides complete thermal magnetic protection in accordance with IEC 947-2 and IEC 947-4-1 standards. The unit is only 55 mm wide and can be installed with clips directly on the DIN rail and screw terminals with Schneider Electric's patented Ever Link technology ensures a permanent, fixed connection of cables whatever the conditions.

This is a 4 poles basic frame for ComPacT NSX160B. ComPacT NSX is designed to optimize space and breaking capacity for all standard and specific applications. This basic frame comes without trip unit, and is compatible with any type of trip unit which has to be ordered separately The breaking capacity Icu is 25kA at 415VAC 50/60Hz. The operational voltage is 690VAC 50/60Hz (limited to 440VAC 50/60Hz if there is an earth-leakage protection). It can be equipped with a variety of optional functions and accessories. The dimensions are 140mm x 161mm x 86mm. It ensures compliance with international standards (IEC 60947), CCC, EAC and marine specifications. ComPacT NSX160B is part of Schneider Electric EcoStruxure Power architecture.

Schneider Electric iCV40N strømkretsbryter 1P + N

Schneider Electric LC1D183BL hjelpekontakt

Schneider Electric Acti9 iCV40 strømkretsbryter 1P + N

grensesnitt plug-in relé - Zelio RSB - 1 C/O - 12 V DC - 12 A

Schneider Electric LC1K0601P7 hjelpekontakt

Schneider Electric ABLS1A24031 strømforsyningstransformator

Digital time switch with weekly program. Programming is carried out on the device. Brief instructions in the storage compartment For installation on TH35 DIN rails as per EN 60715Functions: 56 memory locations ON/OFF switching times Switch preselection ON/OFF permanent switching Manual switching Holiday program Toggling summer time/winter time: -automatic, can be deactivated, toggle rules for Europe,USA and other countries are already saved, customised toggle rules or toggling on a fixeddate can be selected PIN codingNominal voltage:230 AC, -15%/+10%, 50/60 HzMax. switching capacity:16 A, 250 V AC, cos phi=1,10 A, 250 V AC, cos phi=0.6Min. switching capacity:10 mA, 230 V AC,100 mA, 24 V AC/DCContact: Dry contactStandby power: 2 W: 200 WShortest switching time: 1 sConnections: Screw terminals, rigid/flexible 2x0.5 - 2.5 mm2, with end sleeve max.1x2.5 mm2Operating elements: 4 buttons for menu navigationAccuracy: 0.25 s/day (25 °C)Power reserve: 10 yearsIP protection rating: IP 20Insulation class: Class IIOvervoltage category: Class IIIAmbient temperature: -30 °C to +55 °CTransportation temperature: -30 °C to +70 °CStorage temperature: -30 °C to +70 °COperating humidity: 90% RH, no condensingTransportation humidity: 90% RH, no condensingStorage humidity: 90% RH, no condensingWeight: 114g (CCT15440 & CCT15441), 130g (CCT15442 & CCT15443)Dimension: 92.6 x 45 x 66.7 mm (Length x Width x Height)Device width: approx. 45 mm

Digital time switch with weekly program. Programming is carried out on the device or using the smartphone app Acti9 Light andTime Switch via Bluetooth stick. The Bluetooth stick is also used as a memory stick Programming can also be carried out on a PC using the CCT15860 programming kit External input per channel as extension unit Brief instructions in the storage compartment For installation on TH35 DIN rails as per EN 60715Functions: 84 memory locations Memory stick ON/OFF switching times Impulse program Cycle program Switch preselection Holiday program Integrated operating hours counter (reset option, service function for monitoring maintenanceintervals) 2 random programs Display lighting (can be switched off) Toggling summer time/winter time: -automatic, can be deactivated, toggle rules for Europe,USA and other countries are already saved, customised toggle rules or toggling on a fixeddate can be selected PIN coding

TeSys K kontaktor - 3P(3 NO) - AC-3 - <= 440 V 6 A - 230 V AC spole

TeSys GV2 - Kretsbryter - termisk-magnetisk - 6...10 A - skrutilkoblinger

TeSys GV2, TeSys D & TeSys U - terminal block - 3P - for GV1L3

TeSys K kontaktor - 3P(3 NO) - AC-3 - <= 440 V 9 A - 24 V AC spole

roterende håndtak foran KCF - for VN-12, VN-20, V02...V2 - rødt håndtak

Acti9 iIL enkeltindikatorlys - Grønn - 110-230 Vac

TeSys D kontaktor - 4P(4 NO) - AC-1 - <= 440 V 25 A - 24 V DC spole

TeSys U - LUF function block indication of motor load 4...20 mA

Regulert SMPS, 1 eller 2 fase - 100..240 V AC - 24 V 20A

Miniature plug-in rele - Zelio RXM - 4 C/O - 24 V DC - 6 A - med LED

diode - 6..250 V DC - for RPZ/RXZ sockets: diode - 6..250 V DC - for RPZ/RXZ-uttak

RXG-grensesnittsrelérekken omfatter: 10 A reléer med 1C/O kontakt og 5 A reléer med 2C/O kontakter. Sokler med separate kontaktterminaler, skruekobling og innebygd plastholdesklemme, montering på DIN-skinne på 35 mm og panelmontering

TeSys D - kontaktor spole - LXD1 - 24 V AC 50/60 Hz for 9...38 A kontaktor