ABB Komponenter for switchboxes og skap - side 4

Frontbetjent bryter-disconnector. Typer OT 16...125 inkluderer beskyttede terminalklemmer, IP 20.

Handle knob. Mounting directly to the switch, no shaft needed. Padlockable in off-position. Black, 40 mm. Fits OT16...125F3/F4 og OT16...40F6/F8

System pro M compact S200 miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 and CSA 22.2 No. 235, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200 to save 50% space.

Kontaktor 30KW, 400V AC, 65A AC3, 3 poler, kontrollspenning 100...250V AC/DC

Frontbetjent bryter-disconnector. Typer OT 16...125 inkluderer beskyttede terminalklemmer, IP 20.

Elektronisk tredemølle, 0,5 ... 20 minutter, 230V AC, 16A, -10 ... +50 °C, effekttap: 6VA, bredde på 18mm

Terminaldeksel for fjerde pol, OT16...40F4, -FT4, OTP_40F_, enkelpolig, gjennomsiktig.

Shaft for selector type handle.

MS116-6.3 manual motor starter is a compact 45 mm width devices with a rated operational current of Ie = 6.3 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 50 kA at 400 VAC and the trip class 10A. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory.

De nevnte hjelpekontaktene bryter før hovedkontaktene åpner - tidlig brudd

Reststrømsbryter med overstrømsbeskyttelse (RCBO) 3P + N. Utløsning: Type 13A Vurdert reststrøm: 30 mA Terminaler: 25mm2 Driftstemperatur: -25C til +55'C Bredde: 4 moduler, 71 mm Triggerindikator Ved jordfeilutløser vises en blå flagg på skiftet. Denne funksjonen hjelper til med feilsøking og reduserer nedetid.

Shaft for selector type handle.

RCCBs F200-serien sikrer beskyttelse av mennesker og installasjoner mot feilstrøm til jord. Et stort tilbud for standard øyeblikkelig og selektiv AC- og A-typer er fullført med noen konfigurasjoner for spesielle applikasjoner.

Frontbetjent bryter-disconnector. Typer OT 16...125 inkluderer beskyttede terminalklemmer, IP 20.

Latching relays are electromagnetically operated devices. The E290 range from ABB can be used to realise a simple, energy saving and efficient lighting control system. These devices are mainly used in private houses, factory premises and commercial and public buildings as well as in industrial plants. As a rule, latching relays controlled by means of impulse buttons are installed where it is necessary for lighting to be operated from at least three different places. Each time a command is initiated (by means of an impulse button), an electrical pulse is applied to the coil of the latching relay. The coil in the device is briefly energised and activated. That short pulse to the coil leads to the mechanical latch of the internal main contacts. The internal switching mechanism enables us to achieve a safe and reliable interlock (in the same way as a ballpoint pen). Each pulse that is sent to the magnetic coil system switches the device to its previous position where it is held mechanically until the next control pulse is received. The devices are designed for rated currents 16 and 32A. Through the combinable accessories the main modules can be used in nearly all market applications.

RCCBs F200-serien sikrer beskyttelse av mennesker og installasjoner mot feilstrøm til jord. Et stort tilbud for standard øyeblikkelig og selektiv AC- og A-typer er fullført med noen konfigurasjoner for spesielle applikasjoner.

EN20..N installasjonskontaktorer brukes til å kontrollere enkelte belastninger opptil 20 A og kan betjenes av AC- eller DC-spenninger og/eller manuelt. Disse kontaktorene er laget for bruk i husholdningsapplikasjoner så vel som i industrielle miljøer. Følgende fordeler tilbys: støyfri drift, lavt strømforbruk, integrert overspenningsbeskyttelse og manuell overstyring. Forskjellige kontaktkombinasjoner og tilbehør er tilgjengelige. Manuell betjening er tilgjengelig i 3 moduser: På, Av, Auto

De nevnte hjelpekontaktene bryter før hovedkontaktene åpner - tidlig brudd

System pro M compact S200 miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 and CSA 22.2 No. 235, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200 to save 50% space.

AF09 kontaktorer brukes for å kontrollere strømkretser opp til 690 V AC og 220 V DC. De brukes hovedsakelig for å kontrollere trefase motorer, ikke-induktive eller svakt induktive belastninger. AF... kontaktorer inkluderer en elektronisk spolegrensesnitt som aksepterer et bredt utvalg av signaler

Frontbetjent bryter-disconnector. Typer OT 16...125 inkluderer beskyttede terminalklemmer, IP 20.

Frontbetjent bryter-disconnector. Typer OT 16...125 inkluderer beskyttede terminalklemmer, IP 20.

For shaft diameter 6 mm, door drilling 22.5 mm. Indication I-O and ON-OFF. IP65 handles, NEMA 1, 3R, 10

ABB DS201 C10 AC30 strømkretsbryter Reststrømenhet 1P+N

Velgertypehåndtak. Indikasjon I-O og ON-OFF. Ingen separat aksel nødvendig. Låsbar med maks 3 hengelåser, IP 65, hullavstand 36/48 mm, NEMA 1, 3R, 12, rød-gul OT16...125FT