Thermal Grizzly Kabinett-tilbehør

Thermal Grizzly WireView Pro GPU 1x12VHPWR Reverse

GPU power monitoring device measures and records graphics card power through the 12VHPWR connector, displays real-time watts/volts/amps on an OLED, detects connector type, monitors temperatures and issues an audible alarm for over-current, over-temperature or misconnected/incorrect cables.

Designed for in-line measurement, the WireView Pro GPU connects between the graphics card and the PSU to log power usage with a 60-second averaging mode and to detect power peaks and incorrect cable specifications.

• OLED display showing current W, V, A, min/max, 60s average (RAVG) and total energy (Wh)


• Records power consumption for analysis and comparison, with a special 60-second measurement cycle


• Connector detection for 150 W / 300 W / 450 W / 600 W specified cables


• Internal temperature sensors at the power connectors plus two external 10K NTC sensors (5 cm and 20 cm included)


• Audible buzzer with adjustable temperature and current limits; warns on incorrect or loose cable connections


• Available in Normal and Reverse 12VHPWR orientations and connects to the PSU via the power cable

Be aware that the WireView PCB and connectors can become very hot during use—up to about 60°C with air-cooled cards and up to 100°C with water-cooled cards without airflow—so allow it to cool before handling.

Thermal Grizzly WireView Pro GPU 1x12VHPWR Normal

Device for measuring and monitoring graphics card power consumption via the 12VHPWR connector with OLED readout, connector detection, temperature sensors and an audible alarm.

The WireView Pro GPU connects between the graphics card and the power supply to display and record volts, amps and watts on an OLED screen while detecting cable specification and issuing warnings for incorrect connections, overcurrent or overheating.

• Displays current power (W), voltage (V), current (A), min/max, 60‑second average (RAVG) and total energy (Wh)


• Measures and records power only through the 12VHPWR power connector (does not measure via the motherboard PCIe slot)


• Connector detection for 150W / 300W / 450W / 600W cable specs; available in Normal and Reverse pin orientations


• Internal temperature sensors at the power connectors plus two external 10K NTC sensors with 5 cm and 20 cm cables


• Audible buzzer alerts for incorrect cables/connections, exceeded temperature limits or adjustable current limits


• Aluminum housing with optimized cable management and an OLED for quick, review‑friendly measurements

Useful for assessing GPU power use and detecting power peaks on high‑power cards; the device can become very hot during operation, so avoid touching the casing and allow it to cool after shutdown.

Thermal Grizzly WireView GPU 3x8Pin PCIe - Reversed

Thermal Grizzly WireView GPU 1x 12VHPWR - Normal

Thermal Grizzly WireView GPU 2 x 8-Pins PCI-E - Reversed

Thermal Grizzly WireView GPU 2 x 8-Pins PCI-E - Normal

Thermal Grizzly WireView GPU 1x 12VHPWR to 3x 8Pin PCIe - Normal

Thermal Grizzly WireView GPU 1 x 8-Pins PCI-E - Normal

Thermal Grizzly WireView GPU 1x 12VHPWR - Reversed

Thermal Grizzly WireView GPU 1x 12VHPWR to 3x 8Pin PCIe - Reverse

Thermal Grizzly WireView GPU 1 x 8-Pins PCI-E - Reversed

Thermal Grizzly WireView GPU 3x8Pin PCIe - Normal