Gulvvarme - side 3

230 wireless 8 zone control box for Salus iT600 underfloor heating system.

Used in Roth Basicline floorheating system

Complete underfloor heating package with shunt, control unit, room thermostats and thermal actuators and 20 mm couplings.

Fittting for Roth pipe and manifold

Ferdigmontert lineært manifold med integrert låseventil. Mikrometrisk regulering. Komprimeringsender. Uten tilkoblinger. Gul. 2 utløp.

Complete insulation for Roth shunt

Moduler for 1,3,4,6 sløyfer som kan kombineres til maks. 12 sløyfer for tilkobling med grunnleggende sett, tilkobling høyre eller venstre med flat tetning eller tilkobling nedenfra med valgfritt albuesett. Leveres med låseventil for balansering (med justeringsring) og avstengning, justeringsring for balansering uten verktøy, klargjorte steder for romnavnelapper. Retur med ventiler og kapsler, klargjort for aktuatorer nr.1000138 (24V hann) nr. 1005605 (230V hann), sløyfe-tilkobling Q&E 20,Q&E17 komplett med Q&E-ringer1025659 ,1042836 løkkeavstand50 mm headeravstand225 mm maks trykk:6 bar maks temperatur:60°C materiale:fiberarmert polyamid

Verktøy for å feste rørklemmer til gulvvarmerør på isolasjon. Brukes med Unite-rørklemmer.

Uponor termostat T-23 230 V.

SALUS GVM-F underfloor heating manifold is a high flow manifold with manual balancing of each circuit.Each zone valve has on the flow pipe a flow meter that can be used for balancing. Alternatively, the built-in manual flow control integrated into the return valve on the return pipe can be used for balancing. Instructions on how to balance the circuit can be found in the distributor box.SALUS GVM-F underfloor heating distributor has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. Inlet and return pipe connection is 1 ”thread, and the actuator thread is 30 x 1.5 mmContains:Stainless steel manifold set with flow meterEuroconus set for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting brackets for wall mountingWith individual room temperature control. SALUS GVM-F benefits are available with SALUS - wireless control.Properties:Available with SALUS insulation in form-stable EPPComplies with the installation requirements for insulation standard DS 452.Ready for wall mounting.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.• Can be integrated into the SALUS Smart Home solution.Can be operated directly from the room thermostat or from the mobile phone, tablet or computer.Benefits are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension1 ”, for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum test pressure: 10 bar

Danfoss SSM underfloor heating manifold in stainless steel with output for 8 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

22 mm Floor chipboard with milled out grooves. Thereare tongues and grooves on all edges of the board.return boards for the Universal Chipboard System donot exist. The bent turns are milled out when the boardis placed. Size: 1800x600x22 mm

Pre-paired set for 1 circuit underfloor heating incl. Quantum thermostat.

Supply temperature controller with outdoor sensor, supply sensor incl. fittings and elec. actuator

Complete underfloor heating package with shunt, control unit, room thermostats and thermal actuators and 20 mm couplings.

Salus 230 NC actuator for underfloor heating with 30mm nut, can be used for any 230V underfloor heating systems.

SALUS GVU is a complete floor heating shunt solution for underfloor heating with underfloor heating manifold, shunt and circulation pump built together in one unit.Our circulation pump is a 6m pump with capacity up to 16 zones. The underfloor heating manifold is a high flow manifold with manual balancing of each circuit. Each valve has a built-in manual flow control which is very easy to adjust. Instructions on how to balance the circuit can be found in the distributor box.The SALUS GVM floor heating manifold has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. The Inlet thermostat has a temperature setting of 20 to 55 degrees Celsius. Manifold pipe connection is 1 ", and connection to water for the heat supply is 3/4" socket, and threads to the actuator are 30 x 1.5 mm.

Bruk for hver 5 m rørlengde

Isolasjonssett Uponor for gulvfordeler.

Rillet polystyren isolasjonsplate for gulvvarmerør med 300mm senteravstand. Plate dimensjoner 1200 x 790mm, tilgjengelig i to tykkelser på 30 og 50. Brukes sammen med varmeutslippsplate 1009132. Tillatelse på 0,95 m2/stk (1,05 stk/m2).

Used on Roth manifold

Roth heat distribution plate for chipboard board and Universalplate EPS 30. For 16 mm pipe

Used on Roth manifold

Salus 24V NC actuator for underfloor heating with 30mm nut, can be used for all 24V underfloor heating systems.

Uponor Smatrix Wave slave module Pulse M-262 6X 6 channel slave module that expands a Uponor Smatrix Wave controller Pulse X-265 6X not compatible to Uponor Smatrix Wave controller X-163/X-165 6XFunctions: click-in installation no additional wiring needed supports up to 6 room thermostats supports up to 6 actuators (24V) electronic control conformity: CE / EAC operating voltage: 230V / 50Hz max. power input per actuator: 24VAC / 0.2A protection class: IP20 color: white