Danfoss Gulvvarme - side 2

Danfoss TWA-V termisk aktuator 230V NC. Termisk aktuator TWA-V-serien brukes med elektriske på/av-kontroller for å aktivere flere typer Danfoss-ventiler med RAV og VMT/8-tilkobling. Aktuatoren er utstyrt med en visuell posisjonsindikator for å vise t'

Danfoss FHM-C2 prefabrikkert gulvvarmeshunt for regulering av strømningstemperaturen i vannbårne gulvvarmesystemer. Med Danfoss Icon gulvvarmestyring og utvidelsesmodul kan strømningstemperaturen reguleres elektronisk i henhold til oppvarmingsbehovet i hjemmet.

Danfoss TWA-A termisk aktuator 24V NO. Termisk aktuator TWA-A-serien brukes sammen med elektriske på/av-kontroller for å aktivere flere typer Danfoss-ventiler og gulvvarmefordelerskap. Aktuatoren er utstyrt med en visuell posisjonsindikator for å vise..

Danfoss kompresjonskoblinger for RA-N 15, RA-FN 15, RA-U/UN 15, RA 15/6T, RA 15/6TB, RTD 15 og RLV 15

DEVIpipeheat 10 V3, 10m Self limiting with Danish plug

Danfoss SSM underfloor heating manifold in stainless steel with output for 11 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

DEVIpipeheat 10 V3, 25m Self limiting with Danish plug

Danfoss kompresjonskoblinger. Koplinger, RA 15/6T, RA 15/6TB, RLV-K, RLV-KD, RLV-KS, RA-C 15, Manifold CFD.

Danfoss IconTM Zigbee-modul, 24V/trådløs. Brukes til å koble Danfoss Icon hovedkontroller (088U1141 eller 088U1142) til Zigbee 3.0-nettverket og kan dermed styres via Danfoss Ally-gatewayen eller en tredjeparts Zigbee 3.0-kompatibel gateway.

Danfoss SSM underfloor heating manifold in stainless steel with output for 6 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

For de som ønsker å kontrollere systemet via en smarttelefon AppFunksjoner App-modul • Wi-Fi-tilkobling• Android-app• Apple-app• Endre temperaturer• Endre tidsskjema

Danfoss SSM underfloor heating manifold in stainless steel with output for 7 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Danfoss SSM underfloor heating manifold in stainless steel with output for 4 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Kabel for ABNM A5 1 meter, halogenfri (0-10V). HUSK 406848800 OG 460947976

For de som ønsker å utvide den trådløse signaldistansen.

Danfoss strømningstermostat type FH-TC for kompakt gulvvarmeshunt med selvaktiverende termostatisk kontroll.

DEVIpipeheat 10 V3, 12m Self limiting with Danish plug

Danfoss SSM underfloor heating manifold in stainless steel with output for 12 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Danfoss Icon2 Antenne

DEVIpipeheat 10 V3, 4m Self limiting with Danish plug

Danfoss End-seksjon - Endestykker, braketter og andre tilbehør for FHF-manifoldserien. Endestykke med manuell luftventil

Isolasjon for Danfoss manifold FHF og FH-ME

Avslutning – Endestykker, braketter og andre tilbehør for FHF manifold-serien. Endestykke med automatisk luftventil.

Danfoss gulvvarme FHF-E. Endestykker, braketter og andre tilbehør for FHF manifold-serien. Endekappe.

Danfoss kompresjonskoblinger. Koplinger, RA 15/6T, RA 15/6TB, RLV-K, RLV-KD, RLV-KS, RA-C 15, Manifold CFD.