The Tattu R-Line 650mAh 14.8V 4S1P 95C XT30 battery is designed for high-performance FPV racing drones, offering compact power for agile and responsive flight. With a 95C discharge rate, it delivers consistent and immediate energy to support aggressive maneuvers, sharp turns, and fast throttle response. Lightweight yet powerful, this battery is ideal for both competitive pilots and freestyle enthusiasts who require reliable performance without adding unnecessary weight to their quadcopter.

The Gens ace G-Tech Soaring Lipo Battery is the ideal solution for smaller 800mm class aircraft, where every gram counts and performance and reliability are needed. The product offers a capacity of 1,000 mAh and a voltage of 11.1 V (3S), which provides adequate power for small flying models. A discharge current of 30C guarantees optimal performance, and the recommended charging speed of 1-3C allows for quick and safe restoration of full power. In addition, the XT60 connector and JST-XHR balancer plug allow for quick connection, while the 89 g weight and 71.5 x 35 x 17 mm dimensions make the battery ideal for small designs where every inch of space matters.

The Gens ace G-Tech Soaring Lipo Battery is designed to provide reliable and efficient power for a variety of RC models such as F-18 and F-22 Raptor airplanes and jets, as well as Parkmaster 3D and Airfield F15 Jet. It offers a capacity of 1,300 mAh, a voltage of 11.1V (3S) and a discharge current of 30C, so it can guarantee enough power for dynamic flying and advanced maneuvers. The XT60 connector and JST-XH balancer plug allow easy and secure connection to many available devices, while the 107 g weight and compact dimensions of 71.5 x 35 x 21 mm fit perfectly into smaller models, minimizing the impact on overall weight and flight behavior.

For RC models

The Gens ace G-Tech LiPo battery will be a reliable choice for RC model enthusiasts such as 1/8 scale vehicles like the 1/8 SLEDGE. With an impressive 6750 mAh capacity and 14.8V (4S) voltage, it will easily provide the energy needed even for long and intense driving. The maximum discharge current of 60C enables a high level of power, which is crucial for maintaining optimal performance in harsh conditions. The XT90 connector provides a secure connection and wide compatibility, while the JST-XHR balancer plug facilitates charge management. The battery weighs 589 grams and measures 138 x 47 x 50 mm, so it fits many RC models while ensuring proper weight distribution for better vehicle stability.

For RC models

For RC models

For RC models

Gens ace G-Tech is dedicated to 1/8 and 1/10 scale RC cars, providing high quality and intensive discharge capabilities with a maximum constant 60C. Its rugged, hardened housing enhances safety and durability during intense driving, which is crucial in dynamic and demanding environments such as RC car racing. It is ideal for models such as the Traxxas Slash, Emaxx, Bandit, and Rustler, as well as the HPI Strada XB 1/10 RTR Electric Buggy, Kyosho GP 4WD RACING TRUCK, and Team Associated SC8, providing the reliability and performance needed for top performance on the track.

For RC models

Tattu batteries are designed specifically for UAVs, offering exceptional power for both small recreational drones and heavy computing rigs. While many batteries look alike externally, the true strength lies within—high-quality cells engineered for UAV requirements. These batteries provide reliable energy, stable performance, and extended flight or operational times, making them ideal for pilots and operators of all levels. Safety is critical: avoid discharging below 3.0V per cell, use only a microprocessor-based LiPo charger, and store away from flammable objects. Proper handling ensures optimal performance and long-lasting reliability.

The Tattu R-Line 750mAh 14.8V 4S1P 95C XT30 battery is built for UAVs, delivering high power in a lightweight package. Its 95C discharge rate provides instant, reliable energy for drones of all sizes, from recreational quadcopters to advanced rigs. Designed with high-quality LiPo cells, it ensures stable voltage, responsive control, and safe operation during intensive flight sessions, making it ideal for pilots who demand performance and reliability.

Unleash the power of Tattu batteries, engineered specifically for UAVs. Designed for both small recreational drones and heavy commercial platforms, Tattu batteries deliver exceptional performance and reliability. While they may look similar externally, the strength lies in the high-quality cells inside, developed to meet rigorous UAV requirements. These batteries ensure stable energy output, precise control, and extended flight times, making them a trusted choice for pilots of all levels. Safety is key, with guidelines for proper charging, storage, and handling to maintain optimal performance and longevity.

For helicopter models

Gens ace G-Tech is a high-quality LiPo battery designed for use in RC models. It offers a capacity of 5500mAh and a voltage of 11.1V (3S), which provides the long-lasting and efficient power needed for intense driving. The maximum continuous discharge current of 60C enables rapid response to changing conditions and engine demands, delivering power when it is needed most. The T-plug connector and JST-XHR balancer plug ensure a secure and stable connection, while the 376 g weight and 138.5 x 46.9 x 38.8 mm dimensions are optimized to fit most RC cars. In addition, the rugged HardCase protects the battery pack from impacts and mechanical damage, which is crucial when driving in rough terrain.

The Gens Ace G-Tech lithium-polymer battery will find its use in modeling. With a capacity of 5300mAh and a voltage of 7.4V, the product provides a reliable power source for Losi 1/4 Promoto-MX Motorcycle RTR models.

Batteri Gens ace &Tattu R-Line 5.0 1400mAh 22.2V 150C 6S1P XT60 leverer konstant, kontinuerlig effekt ved bruk av X AI Boehmite-teknologi og er designet for å tåle fall.

Denne litium-polymer-batteripakken er bygget for å gi stabil ytelse med mindre ytelsestap etter sykluser, og har en XT60-kontakt for kompatible RC-oppsett.

• Kapasitet: 1400mAh
• Spenning: 22.2V
• Utladningsrate: 150C
• Konfigurasjon: 6S1P
• Kontakt: XT60
• X AI Boehmite-teknologi brukt i produksjonen

Pålitelig kraftlevering og et design med fokus på holdbarhet bidrar til å holde ytelsen jevn over tid.

The Gens Ace battery pack is a lithium-polymer battery tailored to the specific needs of ARRMA vehicles. With its 8000 mAh capacity and 14.8V voltage, it provides long-lasting power and optimized performance. Weighing 740 g, the battery pack measures 157 × 55 × 42 mm, allowing it to fit easily into standard battery drawers. An added advantage is the use of the JST-XHR balancing plug and EC5 discharge plug, which increase compatibility and efficiency of use. The housing, made of a combination of PC and silicone rubber, offers dual protection, which not only protects the battery from mechanical damage, but also improves the stability of its attachment to vehicles.

For FPV and drones

For RC models

The Gens ace G-Tech battery is a highly efficient power source for advanced models such as the Goblin RAW420. With a capacity of 2800 mAh and a voltage of 22.2 V - it provides excellent performance and long-lasting operation in intensive flight conditions. The 60C discharge rate guarantees a fast response to energy demands, which is crucial for demanding applications. Measuring 117 x 35 x 49 mm and weighing 410 g, the product does not put undue strain on your equipment, and the robust XT60 connector allows for a secure and stable connection, which is essential for optimizing RC model performance.

For RC models

For RC models

For RC models

The Tattu Funfly 1550mAh 11.1V 100C battery delivers reliable, high-performance power for 3S drones and FPV applications. Engineered with premium cells, it provides consistent voltage, high discharge rates, and lightweight construction, making it ideal for both beginners and experienced pilots. The battery ensures stable flight performance, quick response, and long operational life under demanding conditions. For safety, never discharge below 3.0V per cell, charge only with a LiPo-compatible microprocessor charger, avoid punctures or heat, and store away from flammable materials.