Foto- & Videotilbehør - side 39

The AVENGER Tripod F1000 Pump Cup with 16mm Spigot in black is a heavy-duty, adjustable tripod foot designed to provide a stable and secure base for various lighting and camera setups.

Akselås, for DJI Ronin 2

The AVENGER Tripod Autopole Extension Mini Boom D600 in silver is a versatile, compact solution designed for securely extending and positioning lighting, cameras, and accessories.

Gaffer Grip Adjustable C1525 is a versatile grip designed to securely hold lighting and equipment in various positions. It features an adjustable mechanism for precise control and stability.

The AVENGER Telescopic Mount for Reflector D700B is a robust and adjustable mounting solution designed to securely hold and position reflectors for photography and film production.

Strømadapter og batteriopplader, for Sony DEV-5K; Handycam DCR-PJ5, SR21, SX21, HDR-CX190, NEX-VG20; NXCAM HXR-NX30, NX3D1E

Rollei 27001 datarengjøringsutstyr Linser/glass Utstyrsrensende spray 15 ml

The Panasonic DMW-EC5GU-K is a large eyecup designed for the Panasonic LUMIX GX9 compact system camera.

Gripforlenger, for a7 II; a7 III ILCE-7M3, ILCE-7M3K; a7R II; a7R III; a7s II; a9

Adapterring for blitzmontering

Fleksibel armklips, for SB R200

Kabel overfører LTC (Line Timecode) fra UltraSync ONE for nøyaktig tidskodesynkronisering på tvers av kameraer og lydenheter.

Atomos Cable to take timecode out of the UltraSync ONE kobles direkte fra UltraSync ONE LTC-porten til en mottakende enhet, og støtter pålitelig distribusjon av master-tidskode i profesjonelle oppsett med flere enheter.

• Sender ut LTC-tidskode generert av UltraSync ONE
• Utviklet for presis synk på tvers av flere kameraer og lydenheter
• Plug-and-play-tilkobling fra UltraSync ONE LTC-port
• Ideell for flerkameraopptak, dokumentarer og arbeidsflyter med konsistent timing
• Hjelper med å synkronisere lydopptakere med video

Gir nøyaktig, stabil tidskode for å holde alle tilkoblede enheter synkronisert gjennom hele produksjonen.

The Syrp link cable connects the Genie with your camera allowing the Genie to control your camera’s shutter. This is a required accessory to shot photos for Time-lapse and photo stitching. It is not required for video recording with the Genie.

Every camera model uses a specific Shutter Link Cable and we offer cables to support hundreds of different cameras.

The Syrp IR Mixed Link Cable for Syrp Genie is designed to connect your camera to the Syrp Genie for making real-time motion control and time lapse videos. It enables camera control with cameras that do not accept an external cable input for shutter release. The 1 foot long cable connects to the interface port of your Genie, and then you position the flexible cable so that the emitter is aimed at your camera's IR receiver. As long as your camera allows you to trigger the shutter release via IR, this cable allows your camera to be triggered by the Genie.

- These cables for the Nucleus-M give you run/stop capabilities in camera systems that support it. Simply plug the 7-pin end of the cable into one of the motors and the other end into the R/S port of the camera.
- Note that this cable was specifically designed for the Nucleus-M so the R/S function only works with the Nucleus-M’s own hand unit and hand grips.

Packing List
(1) 68.6cm cable
(1) Male connection
(1) 7-pin Male connection

Technical Data
Weight: 40g
Length: 68.6cm
Color: Black
Materials: Copper, rubber, aluminum-alloy

Protective armor for the Canon R5/R6

Hydra M25 Mounting Bracket for Electronic Suction Cup

Tilta Nucleus-M Wireless Lens Control System Partial Kit III
The Tilta Nucleus-M Wireless Lens Control System Partial Kit III contains the essential elements for pulling focus wirelessly while handholding. The kit includes the Nucleus-M left handgrip controller, one Nucleus-M motor, one removable lens belt, two motor power cables, and a battery charger unit (batteries not included). The handgrip controller provides wireless fingertip lens control while functioning as handgrip support for your camera rig, and the system enables pulling either focus, iris, or zoom on your lens. If you are using a lens that does not have standard cine-style gears, then use the included lens belt to add gears to your lens.

This partial kit is a single axis system, but the Nucleus-M left handgrip controller will allow you to control additional motors (not included) so you can control more than one lens ring. The included motor power cables allow you to power a motor from either a D-Tap power source or a second motor via the 7-pin to 7-pin connector. The included power cables allow you to easily add a second motor (not included) to the system. The included rosettes aid in mounting the handgrip controller to your camera or rig with ARRI-style rosettes. The system can wirelessly pull focus from up to 1000' away, and with separately available batteries you can power the hand unit for approximately 10 hours on a single charge.

The Tilta Universal Handgrip is a flexible handgrip system that attaches to either 15 mm lightweight or 19mm studio support rods. It consists of a rod bridge and two handgrips. Each handgrip consists of one 90° bend, a short extension, and a rubber hand grip. Each component of the handgrip assembly can be removed, and you can configure the system to suit your needs.

The rod bridge features a single knob that tightens/loosens the rod clamps so it is quick to mount or remove. The assembled system has six points of adjustment, three for each hand, so you can configure the handgrips so they are the most comfortable for you. The adjustment points feature Arri compatible rosettes and spring loaded locking levers. The rubber handgrips provide you with a comfortable sure grip.

Material of Construction CNC machined aluminum
Dimensions Boxed: 14 x 6.75 x 3.25" (35.6 x 17.1 x 8.3 cm)
Weight Shipping: 2.8 lb (1.3 kg)

The Syrp link cable connects the Genie with your camera allowing the Genie to control your camera’s shutter. This is a required accessory to shot photos for Time-lapse and photo stitching. It is not required for video recording with the Genie.

Every camera model uses a specific Shutter Link Cable and we offer cables to support hundreds of different cameras.

The Syrp link cable connects the Genie with your camera allowing the Genie to control your camera’s shutter. This is a required accessory to shot photos for Time-lapse and photo stitching. It is not required for video recording with the Genie.

Every camera model uses a specific Shutter Link Cable and we offer cables to support hundreds of different cameras.

Rycote Nano-Shield 80Hz Filter Cable 22cm, LEMO

For the Khronos iPhone 15 Pro / Pro Max Case

Camera Cage for Blackmagic PYXIS 6K

Khronos Adjustable Handle Space Grey