Foto- & Videotilbehør - side 35

SmallRig 3598 kameraklemme

SmallRig 2790 holder Passiv holder Strømbank Oliven

This articulating arm is the perfect option for mounting accessories to your camera cage such as external monitors, wireless video transmitters, electronic viewfinders and more.

The articulating nature of this arm along with a single tie down lock for all axes means users can easily re-position accessories on the fly which is especially helpful in fast paced shooting environments.

Weighing in at only 11oz, this arm can support up to 11lbs which makes it the strongest articulating arm in our current lineup.

The arm comes in two variations, one that features two NATO Receivers on each end and one that features two 1/4″-20 screws with locating pins .

This bracket attaches to the front of the Tiltaing Full Camera Cage for Sony a7C to provide support for a EF mount lens adapter.

The Universal Quick Release Shoulder Pad is fast and convenient. It allows for any camera with either a Tilta standard or Arri standard baseplate to slide and lock in for run-and-gun shoulder mounted set-ups without the need to screw on additional baseplates. It comes with two dovetail-style plates: one that is Tilta standard and one that is Arri standard so depending on your plate system, you can have your normal dovetail attached to your tripod and then quickly and easily slide off of that and onto the shoulder pad?s plate to be ready for handheld in no time. The pad is sturdy and firm yet very comfortable during operation.

Without blocking the camera's hot shoe, the Tilta Full Camera Cage for Canon R5/R6, in black, provides two additional shoe mounts plus mounting threads for several optional Tilta add-ons. Dedicated 1/4"-20 threads allow you to attach side handles, single 15mm rod holders, and an HDMI clamp. There are also small threads on the front for securing a lens adapter support. For adjusting camera settings, the cage features a scroll wheel on top that controls the camera's right-hand scroll wheel .

Included with the cage is a quick release plate that attaches to the bottom. The plate offers multiple 1/4"-20 threads for balancing the cage on gimbals and other supports. The plate also allows quick release attachment to the optional Tilta 15mm LWS baseplate, which will let you expand the cage with rods and other accessories. Alternatively, Arca-Swiss and Manfrotto standard Tilta quick release plates can be purchased separately and attached in place of the included plate for direct compatibility with Arca/Manfrotto tripods and other supports.

The camera mounting platform is silicone padded for safe camera attachment. Also, a slot is provided on top for securing a safety strap, sold separately. The battery slot of the camera and all other ports and controls remain accessible through the all-aluminum cage.

Tilta MB-T16-SCF camera filter tilbehør

- Retains access to the camera shoe mount, ports, battery, and display
- Multiple 1/4"-20 accessory threads
- 1/4"-20 camera mounting screw
- Removable Manfrotto-style plate fits Manfrotto-compatible baseplates
- 1/4"-20 mounting threads on the bottom for tripod mounting
- One integrated shoe mount
- Integrated single rod port for optional Tilta single-rod mount
- Aluminum and steel construction

This camera cage provides protective armor for the RED Komodo camera. It provides several 1/4”-20 and 3/8”-16 mounting points for mounting accessories. It also includes two rosettes on each side as well as a cold shoe mount on top. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle, adjustable quick release top handle, and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the RED Komodo camera cage will help to fully build out your setup. It includes: the base RED Komodo cage, right side wooden handle, quick release top handle, Arca and Manfrotto quick release baseplates, 15mm LWS baseplate, an Adjustable Cold Shoe Accessory Mounting Bracket, and finally a Dual Canon BP to V Mount Adapter Battery Plate to allow for a longer battery life for your camera.

TILTA Wooden Handle 2.0 Arri Alexa Mini R/S Ca nc Nucleus-m

SmallRig 5802 kamerautstyr

These cables for the Nucleus-M give you run/stop capabilities in camera systems that support it. Simply plug the 7-pin end of the cable into one of the motors and the other end into the R/S port of the camera.

Note that this cable was specifically designed for the Nucleus-M so the R/S function only works with the Nucleus-M’s own hand unit and hand grips.

Weight: 0.09lbs
Length: 68.6cm
Color: Black
Materials: Copper, rubber, aluminum-alloy

- Custom Designed for the Sony ZVE-10 Camera Body
- Mount Accessories via 1/4"-20 Threads and a Cold Shoe Receiver on the Bottom Plate
- Accessible Design Maintains Easy Access to Camera Ports, Function Buttons, and Battery Compartment
- Highly Compatible with Accessories like Sony ECM-W2BT & Wireless Shooting Grip
- Lightweight Design Greatly Improves Functionality while Maintaining a Compact Form Factor

LUPO V-Mount battery plate for dayled 1000

Included:
- T10 Allen key x1
- T6 Allen key x1
- 1/4" Torx screw x1
- M2x6 Torx screws x3
- M2x4 Torx screws x2

Multi-directional Cold Shoe Adaptor is a versatile mounting accessory designed to provide multiple directional adjustment options for attaching accessories to your camera, enabling flexible positioning of external equipment.

SmallRig 2988 kameramonteringstilbehør Batteriplate

SmallRig 3920 gimbal-kameratilbehør Controller USB-C DJI 1 stykker

SmallRig 2220 kameramonteringstilbehør Monteringsklemme

SmallRig 1993B kameramonteringstilbehør Mikrofonmontering

Kamerastativ, for Coolpix S1000pj

SmallRig 1195B kameramonteringstilbehør Skinne

SmallRig SAP2804 kameramonteringstilbehør Håndhjuladapter

Strømforsynt dokkingstasjon med USB-C 3.1-tilkobling, utviklet for å gi strøm og dokke kompatible Atomos monitor/opptakere.

Atomos Powered Docking Station USB-C 3.1 er en USB-C og 3.1 strømforsynt dokkingstasjon for Atomos Shogun, Samurai Blade og Ninja monitor/opptakere, som gir en enkel måte å koble til og holde oppsettet ditt strømforsynt.

• USB-C 3.1 strømforsynt dokkingstasjon
• Kompatibel med Atomos Shogun monitor/opptakere
• Kompatibel med Atomos Samurai Blade monitor/opptakere
• Kompatibel med Atomos Ninja monitor/opptakere

Bygget for Atomos-arbeidsflyter der pålitelig dokking og strøm er viktig.

SmallRig 1871 kameramonteringstilbehør Stang