Foto- & Videotilbehør - side 25

HyperDeck Shuttle HD is a recorder and player that's designed to be used on the desktop! That means it's more than a master recorder as it can also be used as a clip player. The large search dial is perfect for scrolling through lots of media to find the clip you want to play. You get support for ProRes, DNx and H.264 files in NTSC, PAL, 720p and 1080p video formats.

The HDMI connections allow connection to switchers, cameras and monitors. Plus SD cards, UHS-II cards and USB-C external disks can be used for recording and playing media. HyperDeck Shuttle HD uses the same design as ATEM Mini Extreme, so it's a perfect combination to use as a media player. It even has a built in teleprompter!

- Nucleus Support Accommodates Control for Nucleus Nano II, Nucleus M and Nucleus Nano
- Dual Motor Control via Focus Dial and Motor Compatible Joystick
- Expanded Power for the Nano II Hand Wheel via the NATO Mount Contact Pins
- Mounting Points Perfect for Shoulder Rig Setups or for Mounting External Monitors
- Gimbal Ready Capability Supports DJI RS2 and RS3 Pro via Optional Wireless Receiver Module

Designed for Tiltaing camera cages, the Left-Side Advanced Focus Handle, allows you to connect to the optional Nucleus Nano motor to control focus via a built-in finger wheel. It also features a record button for triggering record on/off over an optional Tilta R/S cable connection to compatible cameras. Multiple R/S cables are available, depending on your camera.

The handle attaches to the left side of your Tiltaing cage using your choice of an optional dedicated Left Side Handle Adapter—the Type IV, V, or VI version. Each of these attachment adapters use a different mount type, such as rosette or NATA rail.

The handle accepts a Sony F570 battery, sold separately. An included USB cable connects the handle to your Nucleus Nano motor to power it off the F570 battery and to allow finger-wheel focus control.

There are two connections on the handle: an 8V regulated USB Type-C output (where the USB cable plugs in) and 12 VDC output.

This “half” camera cage provides protective armor for the Sony a7S III camera. It provides several 1/4”-20 mounting points as well as one cold shoe mounting point.

The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

A Tiltaing Lightweight Quick Release Top Handle with Arri Locating Pins can be attached to the cage to provide for a comfortable camera operating setup.

AC-lader med kabel for Atomos broadcast- og ProAV-arbeidsflyter, med støtte for SDI til HDMI-konvertering med innebygd og overlagt LTC-tidskode og audio VU-målere.

Atomos Connect Convert TC - SDI to HDMI (AO-ATOMCTCSH1) er en del av en serie bygget for Broadcast- og ProAV-integratorer, med et slankt metallhus med avtakbare monteringsører for fleksibel installasjon.

• Konverterer SDI til HDMI
• Bygger inn og legger over LTC-tidskode
• Audio VU-målere støtter opptil 8 kanaler
• Seks fargekodede produktfamilier for enklere valg
• Slankt metallkabinett med avtakbare monteringsører

Ideell for å integrere SDI-kilder i HDMI-skjermer, samtidig som nøyaktig tidskode og lydovervåking er synlig.

Klips, for Go

Mounting type: Arca Swiss type base
Maximum load: 180 g
Mounting threads: 1/4", 3/8", ARRI locating holes, cold shoe mounts

The Freewell 2-in-1 Macro Wide-Angle Lens for FUJI X100VI/X100V offers versatile shooting options, combining macro and wide-angle capabilities in a single lens. Capture expansive landscapes or detailed close-ups with 0.75x wide-angle and 2x macro magnification. Its advanced optical design reduces distortion and chromatic aberration for sharp, clear images. Lightweight at 155 g, it is ideal for travel and outdoor photography. Includes a mounting ring, front and rear lens hoods, cleaning cloth, and lens bag for convenience.

Musikk- og instrumentbrett 12218 i svart er et aluminiumsbrett med innvendig filt som skrus på K&M-stativer med rørdiameter opptil 30 mm.

Utformet som et praktisk tilbehør: Det gir en stabil plass til noter og små instrumentdeler, mens den innvendige filten bidrar til å beskytte det du legger fra deg.

• Materiale: aluminium
• Spesialfunksjon: innvendig filt
• Montering: påskruing på rørdiameter 30 mm
• Farge: svart

Ideell for å ha det viktigste lett tilgjengelig på kompatible K&M-stativer.

Mirage Pro Matte Box Basic Kit

Creator kit-tilbehørssett for 5-tommers Atomos-monitorer, som kombinerer montering, strøm, HDMI-låsing og skjermbeskyttelse for et mer fleksibelt og profesjonelt monitoroppsett.

Atomos 5-inch Creator Kit er et komplett sett for kompatible 5-tommers modeller som Atomos Ninja TX, Atomos Shinobi II og Atomos Shinobi GO, og samler essensielt tilbehør for sikker montering, pålitelig strøm, stabil HDMI-tilkobling og forbedret bruk utendørs.

• Monitorfeste med mini-verktøy for enkel montering og justering
• Battery eliminator-stativ for strøm uten batteri
• 12V 3A AC-DC-strømadapter for konstant monitorstrøm
• 4K60 HDMI-låsekabel, full-til-full (30 cm), for en sikker tilkobling
• Solskjerm for 5-tommers monitorer (kompatibel med Ninja TX, Shinobi GO, Shinobi II)
• Skjermbeskytter som bidrar til å forhindre riper og skader

Hjelper med å holde 5-tommers Atomos-monitoren din beskyttet, strømforsynt og klar for profesjonelt opptak og utendørs filming.

Panoreringsgrep for tripodhode

Handlebar Mount for Hydra Alien Mini – Titanium Gray

Sunnylife anti-shock buckle for DJI Flip enhances flight stability by connecting the drone’s front and rear arms, reducing vibration and resonance for smoother shots. Lightweight at just 8 g, it reinforces the arms to prevent accidental folding during collisions, protecting the drone’s fuselage. The precision-molded design ensures a perfect fit without limiting functionality. Quick snap-on installation allows fast attachment and removal without tools, making it a practical and effective accessory for pilots seeking improved control, reduced vibration, and extended drone durability in all conditions.

Filtersett, sirkelpolarisator / nøytral tetthet / graduert nøytral tetthet

Fokuseringsskjerm, for 60 MP CCD / 100 MP CMOS-sensorer

Grensesnittmodulutvidelse, for P/N: CP.RN.00000183.01

SmallRig 3637 kameraklemme

SmallRig 3764 kameramonteringstilbehør Toppgrep

SmallRig 2092B kameramonteringstilbehør Monteringsplate

SmallRig 5520 kameramonteringstilbehør Skjermmontering

SmallRig 4989 FilMov Phone Shoulder Strap Black stropp Mobiltelefon Ekte lær, Nylon, Rustfritt stål Svart

SmallRig 4147 kameramonteringstilbehør Kabelklemme

SmallRig AAW2284 kameramonteringstilbehør

SmallRig 2983 kamerabur 1/4, 3/8" Svart