Foto- & Videotilbehør - side 22

Using two included screws, this compact black Manfrotto Quick Release Plate attaches to the bottom of Tilta full camera cage for the Sony a7C mirrorless camera. The cage can then be mounted directly on tripod heads, ball heads, and other supports that accept Manfrotto-compatible camera plates.

Note: This quick release plate is not compatible with the Tilta 15mm LWS Baseplate.

Switching- og streaming-kit kombinerer en 5.2" monitor/opptaker på kamera med AtomX CAST for 8K HDMI RAW H.265-opptak, HDMI-svitsjing med flere kilder og direkte internettstreaming.

Atomos Ninja V+ Switch & Stream Kit inkluderer Ninja V+ 5.2" 8K HDMI RAW H.265 opptaksmonitor og AtomX CAST, samt tilbehør som Master Caddy II, batterieliminator, strømadapter, hard case, to batterier, solskjerm, skjermbeskytter og ekstra plasttilbehør.

• Tar opp og spiller av opptil 8K RAW-video til/fra mini-SSD-er
• HDMI-inngang med SSD-opptak og støtte for L-serie-batterier
• Støtter Apple ProRes RAW opptil 8K30 og DCI 4K120 (kameraavhengig)
• H.265 kodek-støtte med opptil 10-bit ProRes 4:2:2-opptak
• 10-bit 1000 cd/m²-skjerm med AtomHDR-overvåking og støtte for log-format
• Eksponeringsanalyse, innrammingsverktøy, fokushjelp og anamorf de-squeeze
• AtomX CAST med innebygd programmonitor for HDMI-svitsjing og streaming

Bygget for å håndtere krevende produksjoner, strømlinjeformer dette kitet overvåking, opptak, svitsjing og direktestrømming i ett kompakt oppsett.

This camera cage provides complete protective armor for the Fujifilm X-T3 and X-T4 cameras.

It provides several 1/4”-20 mounting points as well as two cold shoe mounting points.

The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the Fujifilm X-T3/X-T4 cage includes: the base Fujifilm X-T3/X-T4 cage, quick release top handle, Arca and Manfrotto quick release baseplates, as well as a clamp to attach an HDMI cable comfortably to the cage (one specifically for the X-T3 and one for the X-T4).

Compatible with Type II Baseplates and Type I Side Handles.

Monteringsbrakettsett

Fokuseringsskjerm, for Hasselblad H1, H2, H2F, H4X

Helps RS 5 smoothly track and keep the subject precisely positioned in every shot once you've framed the subject from the gimbal's touchscreen.

Kompakt fylllys som gir myk, justerbar belysning for opptak i lite lys og motlys med jevne, naturlige resultater.

Osmo Pocket 4 Fill Light festes magnetisk til gimbalen og roterer synkront for å opprettholde jevn belysning mens du beveger deg. Drevet direkte av enheten gir det kamerakontroll med tre lysstyrkenivåer og fargetemperatur, slik at du raskt kan tilpasse deg ulike miljøer. Høy Color Rendering Index (CRI) sikrer nøyaktige farger og et jevnt, flatterende lys for portretter og video.

• Magnetisk feste med synkronisert rotasjon
• 3 lysstyrkenivåer for fleksibel lyskontroll
• 3 fargetemperaturinnstillinger fra varm til kjølig
• Høy CRI for nøyaktig fargegjengivelse
• Myk, jevn belysning for portretter og video
• Drevet direkte av enheten med kamerakontroll

Kompakt design og justerbar belysning gjør det enklere å fange klart, balansert og naturlig utseende innhold under et bredt spekter av opptaksforhold.

Håndtaksforlenger for slingrebøyle, for DJI Ronin 4D

The Focus Pro All-In-One Combo from DJI equips you with all the tools you need to achieve precise FIZ control over your manual camera lens. The combo includes a LiDAR unit, Focus Pro Motor, Focus Pro Grip, and a hand unit for more accurate, distant, and intelligent autofocus. A carrying case holds all the components for travel to your next shoot.

SmallRig 5242 batterigrep til digitalkamera Digitalkamera, håndgrep Svart

Joby GorillaPod QR Plate 3K Pro

This camera cage provides protective armor for the Sony a7S III camera. It provides several 1/4"-20 mounting points as well as one cold shoe mounting point. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.
A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.
A quick release top handle can be attached to the cage to provide for a comfortable camera operating setup.

Made specifically for video content creators that demand excellent low light performance, numerous recording options, and long recording times, the new A7sIII builds upon the legacy of the A7sII to deliver a camera that hits all the right spots for a camera of this level.

Inspired by the usefulness and ingenuity of this camera's design, Tilta set off to incorporate new design touches that help elevate the camera even further. As part of the Tiltaing series of products, Tilta has put together a versatile, yet lightweight camera cage that is just the beginning for building a camera rig for professional video. The new camera cage is designed to augment and protect the a7sIII, as well as add expansion options like our new rotating top handle, rotating side handles, ARRI standard rosette mounts, and much more.

Protect your Magic Carpet Track with our soft carry case, made from durable black woven nylon and brown leather detailing. Protective internal padding means no dings on your Magic Carpet rails. Includes a carry handle, over the shoulder carry strap and an outside pocket.

SmallRig 4559 batterigrep til digitalkamera Digitalkamera, tommelgrep Svart

HC-110 comes as a liquid concentrate, allowing users to mix up just enough concentrate with water to make a single-use solution of the volume required by their developing tank. These characteristics make it a highly convenient and cost-effective developer choice for beginners and experienced users.

Several dilution options exist (see data sheet), but Dilution B (1:31) is the most popular. 1L of liquid concentrate makes 32L of one-shot Dilution B working solution.

Normal and push/pull processing times are available at The Massive Development Chart by Digital Truth.

Features:
Versatile B/W film developer
Liquid concentrate with a long shelf life
Easy and precise contrast control using different dilutions
Economical choice for beginners and professionals
Suitable for push/pull processing
1L of concentrate makes 32L of Dilution B one-shot solution

The concentrate is highly effective at removing magenta tints from T-grain films, resulting in superior quality images. To prepare the solution, simply mix the concentrate with water to produce a 5L solution.

Features:
Hardening universal B&W film fixer
Perfect for removing magenta tints
1L of concentrate to make 5L of working solution

SmallRig 5370 softboks

SmallRig PSC2428 kameramonteringstilbehør Strop / Belte

SmallRig 4198 kamerabur 1/4, 3/8" Svart

SmallRig 5160 kameramonteringstilbehør Håndtak

SmallRig 5507 kameramonteringstilbehør Holder

SmallRig 5566 kameramonteringsdel Solskjerm Cameras 1 stykker

SmallRig 5434 kamerautstyr

SmallRig 4637 videostabilisatortilbehør Skjermmontering Svart Aluminium, Messing, Rustfritt stål 1 stykker DJI

SmallRig 5448 kameramonteringstilbehør Frigjøringsplate