Elma Instruments - Kvalitet til konkurransedyktige priser

Elma Instruments Zircon HD70 Lath and steel rule seeker

StudSensor HD70 OneStep stud finder har en lys, bakgrunnsbelyst LCD-skjerm og Target Spotlight som lyser opp på skjermen når du har funnet midten av en stender. En lav batteriindikator informerer deg også når batteriet bør byttes ut for optimal ytelse. To stender scan-moduser finner midten, kantene og retningen til tre- og metallstendere samtidig som de varsler deg om tilstedeværelsen av live AC elektrisk ledning.

859,00 kr (687,20 kr)

Fjernlager, 2-4 dager til forsendelse (Forventet på eget lager 11.02.2025)

Elma Instruments Elma dt-128m moist meter

Elma DT-128M gir en veldig rask måte å ikke-destruktiv måling av fuktighet i byggematerialer og fuktdistribusjon i for eksempel vegger, tak og gulv. Instrumentet injiserer et høyfrekvent signal i materialet og måler fukten 20-40mm n i materialet. Bare hold ballspissen mot overflaten, så vises fukten umiddelbart på den store, bakbelyste skjermen. Elma DT-128M er utstyrt med 2 justerbare alarmgrenser, automatisk nulljustering, min / maks-, automatisk avstenging og displayhold. Instrumentet leveres klart til bruk inkludert batterier og manual. Merk: Materialet som skal måles bør være minst 20-40 mm (avhengig av materialet) for å gi en lesning.

2 297,00 kr (1 837,60 kr)

På lager - 1-3 dager til levering

Elma Instruments Zircon hd900c multiscanner

MultiScanner HD900c OneStep multifunksjons stud finder lokalisere stendere, metall og strømførende ledninger bak vegger, gulv og tak. Det avanserte ColorTrip-displayet lyser grønt i stud scan-modus, blått i metallmodus og rødt i live AC-scan-modus. Skjermen blinker eller lyser rødt for å varsle om tilstedeværelsen av live AC i Stud-, DeepScan- og Metal Scan-moduser. En 4-modusbryter gjør det enkelt å endre moduser, mens den ultra-lyse skjermskjermen, SpotLite Pointer og lydtonen indikerer plasseringen av målet.

1 565,00 kr (1 252,00 kr)

Fjernlager, 2-4 dager til forsendelse (Forventet på eget lager 11.02.2025)

Elma Instruments Elma bm251 multi meter

Elma BM 251 is a new handy multi meter with a lot of funktions and build-in PC-communication. The instrument measures current, voltage, frequency, resitance and continuity. The instrument has build-in non contact detecting of electrical fields, which can be used for detecting electromagnetical fields from PC screens or as non contact voltage detector. Elma BM 251 has optional automatical/manual range selection, intelligent auto power off, relative measurement, and data hold. With THe PC-communication and Windows software (extra accessorie) is it possible to make ON-Line data logging. The instrument is warning against misconnection and has hogh effective fuses. Complies with IEC 61010-1 CAT III 600V and is delivered incl. rubber protection, test leads, batteries and manual. Technical data: Voltage: 0-60m-600m-6-60-600-1000V AC/DC Accuracy: DC: ± 0,5%+2D, AC: ± 1,%+3D Current: 0-500-5000-50m-500m-5-10A AC/DC Accuracy: DC: ± 0,5% + 3D, AC: ± 1,0% + 3D Resistance: 0-600-6k-60k-600k-6M-60M (600V) Frequency: 10Hz - 50kHz Display: 3 5/6 digits Max. display: 5999 Battery: 2x1,5V LR03 (inkl.) Size: 161 x 80 x 50 mm Weight: 340 g

1 579,00 kr (1 263,20 kr)

På lager - 1-3 dager til levering

Elma Instruments HIK Pocket2 Thermal Pocket Camera 256x192px -20~400C

HIK Pocket2 termisk lommekamera 256x192px -20~400C Produkt beskrivelse: HIKMICRO Pocket2 er et smart og super kompakt termisk lommekamera med en termi...

7 295,00 kr (5 836,00 kr)

På lager - 1-3 dager til levering

Elma Instruments Elma 2000x - cat iv voltage tester

Elma 2000X is the market's smartest voltage tester. The second generation has improved in several aspects, including smart fastening test pens, with accurate distance between them, so that they fit directly into the wall outlet. The test probes has both 2 and 4mm diameter, which ensures good connection. Elma 2000X has many extra features that makes everyday work easier and safer. The instrument is fully automatic, switching between the different functions and can not fault controlled. - Voltage Test - 2 pole with LED indication 12-690 V AC / DC - Phase indicator - a voltage test indicates phase with LED and audible signal - Phase rotation test - 2-poled 3-phase networks - Continuity test - With LED and audible signal - Built-in lighting - Ideal when working in dark locations - High safety - IEC 61010-1 CAT IV, double insulated, IP 65, EN 61243-3 Class B - Suitable for Laus-work , Elma 2000A is equipped with practical highly flexible cord has a protective cover and is delivered incl. Danish manual and standard batteries. Voltage indication also works without batteries. Technical data: Voltage indication: 12, 24, 50, 120, 230, 400 and 690V AC / DC Test current: <3.5 mA Phase indication: 100-690V AC Continuity test: 000 to 400 k Phase Sequence: 2 pole principle, 200-690V AC Safety: IEC 61010-1 CAT IV 600V, IEC 61243-3, Class B (1000V) Double Insulated, IP 65 Battery: 2x1, 5V LR03 (included) Dimensions: 241x68x28 mm Weight: 230 g

936,00 kr (748,80 kr)

Fjernlager, 2-4 dager til forsendelse (Forventet på eget lager 11.02.2025)

Elma Instruments Elma 3037 true rms ac mini clamp meter

Elma 3037 is atrue RMS clamp meter in a handy design for easy measuring of AC currents. The instrument has a good resolution down to 10mA, a big backlighted display, smart data hold and automatically zero-adjustment. Elma 3037 has low pass filter and "Inrush" for measuring on start/inrush currents. With the "Volt sense" function you are able to detect the voltage without contact. THe instrument complies with IEC 61010-1 CAT III 600V and is delivered incl. batteries and manual. Technical data:Current AC: 0-60-300AResolution: 0,01-0,1AAccuracy: ±2% + 5 DDisplay: 3 5/6 cifferMax. display: 5999Clamp size: 24 mmBattery: 2x1,5V LR44 (incl.)Size: 147x60x31 mmWeight:100 g

1 785,00 kr (1 428,00 kr)

På lager - 1-3 dager til levering

Elma Instruments Smoke pen

Røykpenne inkludert 6 røykpinner. Brennetid: 30 min/pinne

620,00 kr (496,00 kr)

På lager - 1-3 dager til levering

Elma Instruments Elma laser x2 green cross laser for increased visibility

The brand new Elma Laser x2 line- and X laser is equipped with the latest technology, using green laser light, for enhanced visibility. The human eye is about 4 times more responsive to green light, than classic red, increasing the visible range remarkable, both in- and out doors. Elma Laser x2 provides perfect markings even in long range, eliminating the need to draw on the floor, walls and ceilings. This makes the task of installing shelfs, paintings, kitchen tables etc.Elma Laser x2 is indicating horizontal, vertical or both, in an angle of nearly 180 , for perfect leveling, even right above the instrument. Fast and easy, and you have both hands free to work. Just place the laser and turn it on, it's as simple as that.Forget about time consuming, accurate leveling of the instrument. Elma Laser x2 is self leveling, and if the deviation is too big, the laser will indicate by fast blinking, making operating error impossible. Besides horizontal and vertical lines, you are able to make straight lines in sloping angles, useful e.g. for stairways etc. Lock the Elma Laser x2 to deactivate the self leveling mechanism, and set the angle, simply by placing on standard tripod or on the supplied magnetic adapter. When the leveling is locked, the instrument will indicate, by blinking every 3 second, to prevent mistakes. As additional safety against errors, Elma Laser x2 can't be turned off, when the lock is deactivated, securing the pendulum suspension against transport damage.Elma Laser x2 cross laser is delivered ready to use in nylon bag, including batteries, manual and magnetic adapter.

1 279,00 kr (1 023,20 kr)

Fjernlager, 2-4 dager til forsendelse (Forventet på eget lager 11.02.2025)

Elma Instruments Elma 3039 true rms ac/dc clamp meter

Elma 3039 er en sann RMS klemmemåler i et praktisk design for enkel måling av både AC- og DC-strømmer. Instrumentet har en ekstra god oppløsning ned til 10mA, stor bakgrunnsbelyst skjerm, smart datahold og automatisk nulljustering. Elma 3039 har lavpassfilter og "Inrush" for måling av innkommende strømmer. Med "Volt sense"-funksjonen er det mulig å oppdage spenning - uten kontakt. Instrumentet overholder IEC 61010-1 CAT III 600V og leveres inkludert batterier og manual. Tekniske data: Strøm AC/DC: 0-60-300A Oppløsning: 0,01-0,1A Nøyaktighet: ±1,5% +5 D Skjerm:3 5/6 sifre Maksimal visning:5999 Klemme størrelse :24 mm Batterier :2x1,5V LR44 (inkl.) Størrelse :147x60x31 mm Vekt :100 g

3 031,00 kr (2 424,80 kr)

På lager - 1-3 dager til levering

Elma Instruments Elma volt stick bright

Elma Volt Stick Bright is putting in new standards for safety and smart voltage detection. Elma Volt Stick Bright is a touchless voltage detector, which without electrical contact easy and safely indicates AC voltage. The tester is managed by a programmable micro processor, and it has a lot of advantages.•The strongest LED light on the market, which also is visible in sunlight. •Clear sound level at voltage indication. •Optional sensitivity 20-1000V and 230V•Powerfull forwarded torch•Automatically self test and battery test•Allways on – can not be operated incorrectly•Multi flat tip – fits in all outletsElma Volt Stick Bright comply with IEC 1010-1 CAT IV 600V, is UL listed and delivered incl. batteries and manual.Technical data:Voltage range: 20-1000V ACBatteries: 2x 1,5V LR03 (incl.)Size: 152xØ17mmWeight: 40g

342,00 kr (273,60 kr)

Fjernlager, 2-4 dager til forsendelse (Forventet på eget lager 11.02.2025)

Elma Instruments Elma bm031 sand rms ac clamp multimeter

Elma BM031 er en hendig og liten klemmemultimeter som måler True RMS AC-strøm. Ved hjelp av instrumentet er det mulig å måle strømmer så høye som 600A AC, og multimeterfunksjonen gir målinger av spenning, motstand og kontinuitet. AmpTip-funksjonen tilbyr muligheten til å måle strøm fra 0-60A med ekstra høy nøyaktighet. Elma BM031 er utstyrt med bakgrunnsbelyst display, min / max / rel, datahold peak hold og spenningsdeteksjon. Elma BM031 oppfyller IEC 61010-1 CAT III 600V og CAT IV 300V og leveres klar til bruk i pose inkludert testledninger, batteri og brukermanual.

1 686,00 kr (1 348,80 kr)

På lager - 1-3 dager til levering

Elma Instruments Splintax smoke matches

5,7033174717e+12

158,00 kr (126,40 kr)

På lager - 1-3 dager til levering

Elma Instruments Elma dtr-880a

The Elma DTR-880A is a smart instrument, perfect for measuring and recording temperatures and relative humidity in environments where monitoring of these parameters is vitally important. The DRT-880A has an extra large display and many applications, such as control of temperature and / or relative humidity in homes, offices, computer rooms, storage rooms, hospitals and laboratories, etc. The instrument is equipped with multi display for displaying both alarms, temperature and relative humidity. The instrument has built-in clock and memory for displaying max / min values of temperature and relative humidity, as well as switching between ° C and ° F. The Elm DTR-880A comes complete with battery, table support and wall mount.

765,00 kr (612,00 kr)

På lager - 1-3 dager til levering

Elma Instruments Elma 6100bt bluetooth multimeter

Elma 6100BT is a rugged true RMS AC/DC mini multimeter equipped with Bluetooth function. The instrument measures current, voltage, frequency, capacitance, resistance and continuity. Furthermore, the instrument provides a custom range for external current clamp, measuring as much as 3000A using the flexible clamp ElmaFlex 430.Using the Bluetooth function and free app, Elma Link, available for both iOS and Android, Elma 6100BT becomes a safe an clever documentation tool. Watch the display directly on your Android/iOS device and perform measurements in safe distance from dangerous voltage. Watch and record all values and trends directly on your phone. Save and attach comments to measurements and share e.g. by mail.Elma 6100BT is equipped with back lit display and bright LED torch light, data hold, max/min and auto power off. The instrument fulfills EN61010-1 CAT III 600V and is delivered with test leads, batteries and manual.Using the Bluetooth function and the free App, Elma Link, available for iOS and Android, Elma 6100BT is an easy tool for documentation. Watch the display on your mobile device and perform the measurements in safe distance from dangerous voltages. Record values and trends on your phone and save with attached photo documentation for easy sharing by mail etc.Elma 6100BT is equipped with a large, back lit display and has built in LED torch light, data hold, max/min and auto power off. The instrument fulfills EN61010-1 CAT III 600V and is provided in bag incl. test leads, batteries and manual.

1 826,00 kr (1 460,80 kr)

På lager - 1-3 dager til levering

Elma Instruments Elma volt test wide - 20 to 1000v ac

Elma Volt Test Wide is a super sensitive proximity tester indicating voltage down to 12V AC. The instrument indicates without electrical and metallic touch, easy and secure AC voltage. When there is voltage (phase) present, it is indicated by a sharp and clear orange light. Elma Volt Test Wide meets IEC 61010-1 CAT III 1000V/KAT IV 600V and comes complete incl. guidance and batteries. Elma Volt Test Wide is ideal for monitoring example.: - Fuses, without being taken out. - Pick Secure sockets without separation. - Cables and wires, finds any. breaking through the mantle. - Daisy chains, find any. defective lamps. - Does the stage, even in large cable bundles / boards. Technical data: Voltage range: 12-1000V AC Batteries: 2x1, 5V LR 03 (included) Dimensions: 146x 18 mm Weight: 40 grams

430,00 kr (344,00 kr)

Fjernlager, 2-4 dager til forsendelse (Forventet på eget lager 11.02.2025)

Elma Instruments Elma 1500b - voltage and contuinity tester

Elma1500B er en ny liten og hendig tester med 3 funksjoner: - Testspenning 12-690 V AC / DC, 2-pol med LED-indikasjon - Analysetest med både hørbar og visuell indikasjon - Unipolar faseindikasjon Tester har smarte festetestprober med 19 mm avstand for å passe direkte inn i stikkontakten og muliggjør enkelthånds betjening. Instrumentet har ingen knapper og bytter automatisk mellom de forskjellige funksjonene slik at det ikke kan feilkontrolleres. Elma1500B bruker standardbatterier, og for ekstra sikkerhet fungerer spenningsprøvefunksjonen selv uten batterier. Elma1500B er i overflodsklasse IP54 og oppfyller spesielt IEC61010-1 CAT IV300V and CAT III600V and EN61243-3. Tekniske data: Spenningsprøve: 12,24,50 samt120,230,400og690VAC/DC Frekvens:0-65Hz Kontinuitet:0-200k Spenning:100-690V Batteri :2x1,5VLr03 (Inkludert) Dimensjoner :205x67x27mm Vekt :130g

687,00 kr (549,60 kr)

På lager - 1-3 dager til levering

Elma Instruments Elma bm037 trms ac/dc clamp multimeter

Elma BM037 is a small and handy clampmeter designed for measuring True RMS AC and DC currents. Using this handy clamp multimeter, it is possible to measure currents as high as 600A. The multimeter function offers measurement of voltage, current, capacity, resistance and continuity. Besides the clamps function, the instrument is also measuring 0-2000 micro amperes on the sockets. Furthermore the instrument is equipped with temperature measurement, capable of measurements using standard type k sensor, for measuring numerous applications. The AmpTip function provides the opportunity to measure currents from 0-60A with enhanced accuracy.Elma BM037 is equipped with back lit display, min/max/rel, peak hold and voltage detection. Elma BM037 fulfills IEC 61010-1 CAT III 600V and CAT IV 300V and is delivered ready to use in bag including test leads, temperature sensor, battery and user manual.

2 302,00 kr (1 841,60 kr)

På lager - 1-3 dager til levering

Elma Instruments Elma volt test 106 - voltage indicator

Elma 106 indikerer AC spenning uten behov for berøring. Når spenningen er til stede (fase), indikeres det ved tilstedeværelsen av en kraftig og klar oransje lys. Elma 106 er ideell for overvåking: - Sikringer - Sikre kontakter uten separasjon. - Kabler og ledninger, bruk den til å søke etter trådbrytningspunkter. Elma 106 oppfyller EN 61010-1 CAT III 1000V/KAT IV 600V og leveres komplett med veiledning og batterier. Tekniske data: Spenningsområde: 100-1000V AC Batterier: 2x1,5V LR03 (inkludert) Dimensjoner:144x17 mm Vekt:50 gram

301,00 kr (240,80 kr)

Fjernlager, 2-4 dager til forsendelse (Forventet på eget lager 11.02.2025)

Elma Instruments Easytest classic ke301

The EASYTEST kit, is a combination of a tone transmitter and a inductive trace probe. The trace probe is easy to use and solves problems in searching, identifying and trace cable installations. EASYTEST is able to find insulated cables on distances up to 60 cm, and is able to follow the cables up to 15 km. The instrumentet is able to trace/finding cables, split pairs, pairs, reversed pairs, short curcuits, disconnected leads and more. EASYTEST is an ideal instrument for the telecommunication/network installer tracing a single wirepair, the alarm installer who has to trace the cable route to the alarm system, the electrical installer who has to trace the cabling in a building and more. EASYTEST is used a vary of apllications where it is not possible to find a cable/wire phusical or visual. EASYTEST is even more equipped with two Talk-sets and is therefore able to use two way communication in systems up to 15 km. a very userable feature in places, where it s not possible to use walkie-talkies or mobile phones. Easytest can be conencted via the RJ 11 connector or the supplied crocodile clips. Technical data: Voltage protection: 110V AC/240V DC Range: 15 km Battery transmitter: 1x9V 6F22 (excl.) Battery receiver: 1x9V 6F22 (excl.) Size/weight transmitter: 68 x 96 x 25 mm / 150 g Size/weight receiver: 220 x 40 x 25 mm / 80 g

4 149,00 kr (3 319,20 kr)

Fjernlager, 2-4 dager til forsendelse

Elma Instruments Sparometer

SparOmeteret er en energimåler som kan kobles direkte i stikkontakten, og vil enkelt vise energiforbruket på alle 230V apparater opp til 2300W/10A. Måleren har mange funksjoner: V, A, W, min.W, max.W, kWh og driftstid. SparOmeteret kan settes til å måle over en periode på 1, 7 eller 30 dager eller kontinuerlig. Måleren vil huske verdiene når den blir frakoblet. Tekniske data: Spenningsområde: 230V AC Strømområde: 10A AC Effektområde: 2300W Nøyaktighet: Klasse2 Størrelse:138x69x75 mm Vekt :180 g

1 094,00 kr (875,20 kr)

Fjernlager, 2-4 dager til forsendelse

Elma Instruments Kyoritsu 3132 insulation tester

Kyoritsu K3132 is a safe small and handy insulation tester, whick complies against even the toughest demands. The instrumentet has following advantages and functions: - Chooseable test voltage 250, 500 og 1000 V - Lockable test not – Then you can have both hands free - Mirror display scale – For safe reading - Built in ohm meter for measuring on earth conenctions - Built in voltage meter 0-600V - Exstra safe and robust – Dust and splashproof IP 54, complies with IEC 61010-1 CAT III K3132 is delivered incl. batteries, test leads and manual. Technical data: Test voltage: 250, 500 og 1000V user choseable Measuring ranges: 0-100, 0-200, 0-400 M Measuring current: > 1mA Ohm meter: 0-3 / 0-500 Measuring current/voltage: > 200 mA / 4 V Voltage meter: 0-600 V AC Battery: 6x1,5V LR06 (inkl.) Size: 106x160x72 mm Weight: 560 g

3 678,00 kr (2 942,40 kr)

Fjernlager, 2-4 dager til forsendelse

Elma Instruments Easytest protect ke401 trace probe set

The EASYTEST kit, is a combination of a tone transmitter and a inductive trace probe. The trace probe is easy to use and solves problems in searching, identifying and trace cable installations. EASYTEST is able to find insulated cables on distances up to 60 cm, and is able to follow the cables up to 15 km. The instrumentet is able to trace/finding cables, split pairs, pairs, reversed pairs, short curcuits, disconnected leads and more. EASYTEST is an ideal instrument for the telecommunication/network installer tracing a single wirepair, the alarm installer who has to trace the cable route to the alarm system, the electrical installer who has to trace the cabling in a building and more. EASYTEST is used a vary of apllications where it is not possible to find a cable/wire phusical or visual. EASYTEST is even more equipped with two Talk-sets and is therefore able to use two way communication in systems up to 15 km. a very userable feature in places, where it s not possible to use walkie-talkies or mobile phones. Easytest Protect test kit is a further development of the known Easytest Classic Kit (desciption above). The instrumentet is having a lot of new functions eg. is it possible to see if data ports is connected. With the trace probe is it possible to detect ISDN/ADSL lines. Easytest Protect emits a sine signal with can cause in reduced "Crosstalk", and it is therefor possible to trace on live telephone cables. Easytest Protect can be connected through the integrated RJ 11, RJ 45 or ther included crocodile clips. Technical data: Voltage protection: 110V AC/240V DC Range: 15 km Battery transmitter: 1x9V 6F22 (excl.) Battery probe: 1x9V 6F22 (excl.) Size/weight transmitter: 68 x 96 x 25 mm / 150 g Size/weight probe: 220 x 40 x 25 mm / 80 g

5 030,00 kr (4 024,00 kr)

Fjernlager, 2-4 dager til forsendelse

Elma Instruments Elma 45 - lan cable tester

Instrumentet er designet for enkel og rask testing av LAN-kabelinstallasjoner. Instrumentet kan teste for kortslutninger, avbrudd, kryssede par, reverserte par og splittede par. Instrumentet er lett og hendig. Testresultat vises ved hjelp av en 14-segments LED-skjerm og 8 LED-er. Kabeltester er utstyrt med en beskyttelseskrets som hindrer skade på instrumentet hvis du ved et uhell velger telefonen i stedet for datakontakten. Elma 45 LAN-kabeltester leveres komplett i pose inkludert batteri, adapterkabel, manual og terminator #1 Tekniske data: Testkabellengde: 1,2-150 m Kretsbryterbeskyttelse: Tåler ringspenning og sløyfespenning Kontakt: RJ-45-, BNC-kabler Typer: UTP-, COAX-batterier Batteri: 9 volt 6F22 (inkludert) Dimensjoner: 170 x 52 x38 mm Vekt :180 g

2 427,00 kr (1 941,60 kr)

Fjernlager, 2-4 dager til forsendelse

Elma Instruments Elma easy-iso insulation adapter

When you make an insulation test on curcuits with elektronical equipment included, you should connect all phases and neutral together, during the measurement. In this way you are shure about, that there will be no potential between the leads, and therefore you will avoid accidents with electronical equipment and sensitive equipment. With the new Easy-ISO it is even more easy to make above written connections, and then make the measurement. Easy-ISO includes four Ø6,6 mm magnetical probes and a 4-pole test lead, which is connected together as one test lead. The magnetical probes are holding the wire fixed automatically on the measuring point, not using any other helping tools. An insulation test is made on an installation with no voltage present. Disconnect eg. on the RCD and connect the Easy-ISO on the downstream on a 4-pole curcuit breaker. If all the groups on the curcuit breaker is on, then you normally is able to measure the hole installation at once. Using this method all the installation is shortedit is important to disconnect Easy-ISO, before turning on the voltage. Elma Easy-ISO leveres i lille taske og opfylder IEC 61010-1 KAT III 600V. Technical data: Current: max 2A IEC61010: Cat III 600V

876,00 kr (700,80 kr)

Fjernlager, 2-4 dager til forsendelse

Mandag - Fredag:	9.00 - 16.30
Lørdag - Søndag:	Stengt

Telefon: +47 35060606	+47 35060606
E-post privatkunder:	[email protected]
E-post bedriftskunder:	[email protected]