Dreneringsprodukter - side 37

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

With side drain on the left.

Can be freely positioned against the back wall, independent of any side walls. Only for use with ClassicLine.

ShowerLine has a built-in slope, so that the floor in the shower cubicle slopes correctly by 2% down towards the floor drain. For added wetroom safety, the shower cubicle is framed by flanges on three sides.

The shower screen is mounted in the track on the fixed module, to eliminate the risk of working loose over time. Combine with: outlet unit, frame, grating/panel and shower screen.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

ShowerLine has a built-in slope, so that the floor in the shower cubicle slopes correctly by 2% down towards the floor drain. For added wetroom safety, the shower cubicle is framed by flanges on three sides.

The shower screen is mounted in the track on the fixed module, to eliminate the risk of working loose over time. Combine with: outlet unit, frame, grating/panel and shower screen.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

For ikke-ventilerte flate takkonstruksjoner med isolasjonstykkelse på 14 cm

The set consists of the Custom base, rail, heightener set and screws.

The set must be assembled before installation.

Glue your own floor tile to the base, to complete the solution.

The Custom solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit.

Special glue for adhesion of your own tile and 10 x 6-mm spacers to use for installation are also included.

dBlue Phonoclip er en akustisk brakett for installasjon av dBlue-systemet (rør og rørdeler). Den egner seg for installasjon på steder der det er krav til støynivået.

For bygningsdrenering, for områdedrenering

dBlue er en avløpsrør i PP (polypropylen) i 3 lag. Det egner seg for installasjon på steder der det er krav til støynivået. Rørsystemet har dokumentert lydnivå på 19 dB (A). Hvis det er strengere krav til lyd, anbefaler vi FRIAPHON.

dBlue er en avløpsrør i PP (polypropylen) i 3 lag. Det egner seg for installasjon på steder der det er krav til støynivået. Rørsystemet har dokumentert lydnivå på 19 dB (A). Hvis det er strengere krav til lyd, anbefaler vi FRIAPHON.

dBlue er en avløpsrør i PP (polypropylen) i 3 lag. Det egner seg for installasjon på steder der det er krav til støynivået. Rørsystemet har dokumentert lydnivå på 19 dB (A). Hvis det er strengere krav til lyd, anbefaler vi FRIAPHON.

dBlue er en avløpsrør i PP (polypropylen) i 3 lag. Det egner seg for installasjon på steder der det er krav til støynivået. Rørsystemet har dokumentert lydnivå på 19 dB (A). Hvis det er strengere krav til lyd, anbefaler vi FRIAPHON.

FRIAPHON® er et lydreduksjonssystem for avløp i plast laget for å møte de høye kravene som kreves på moderne avløpssystemer. Systemet brukes til vanlig kloakk og oppfyller strenge krav til brann- og lydisolering.

dBlue er en avløpsrør i PP (polypropylen) i 3 lag. Det egner seg for installasjon på steder der det er krav til støynivået. Rørsystemet har dokumentert lydnivå på 19 dB (A). Hvis det er strengere krav til lyd, anbefaler vi FRIAPHON.

Vannfelle for Kvadrat

For bygningsdrenering, for områdedrenering

Røroppfang - for vask - uten: justeringsrørkomponenter Avløpsbøy 45° DN1: 40, DN2: 50