Wera Bormaskin & Bits

Wera 826 T Kraftform Turbo Driver

645,00 kr (516,00 kr)

Fjernlager, 2-4 dager til forsendelse (Forventet på eget lager 08.06.2026)

Wera Bit-Check 30 Diamond 1

Bits with tiny diamond particles on the bit tip. This ensures a secure fit in the screw head, reduces the contact pressure required and lowers the risk of slipping. BiTorsion bits with an elastic torsion zone – where kinetic energy is diverted from peak loads – and softer BiTorsion zone to prevent the bit tip from twisting under high strain. This greatly extends the product service life. Comes with Rapidaptor technology, which allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward – for rapid bit change with just one hand. For insertion in the power screwdriver or into the chuck of the power drill. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera "Take it easy" Tool Finder with its colour coding and clearly visible imprint.

697,00 kr (557,60 kr)

På lager - 1-3 dager til levering

Wera Bit-Check 30 Metal 1

Robust Bit-Check fra Wera. Bit-Checks gir en rask oversikt over tilgjengelige verktøy. Bits som ikke trengs settes enkelt tilbake i settet og går ikke tapt. Enkel transport, for eksempel i skjortelommen. Inkluderer universell holder med sterk permanent magnet for å ta opp bits med ¼" sekskantet hodedrift. Kan settes inn i kraftskrutrekkeren eller brukes i chucken på elektrisk drill. Multi-komponent Bit-Check som kan plasseres oppreist for permanent sikker lagring av bitsene.

239,00 kr (191,20 kr)

På lager - 1-3 dager til levering

Wera Bit-Check 30 TX Universal 1

30-piece. Tough-absorbing Wera bits for socket head screws, for universal use. 1 universal halter 899/4/1 K for take-up in the power screwdriver or use in the chuck of the power drill.

214,00 kr (171,20 kr)

På lager - 1-3 dager til levering

Wera Bit-Check 7 Hex-Plus 1

Robust Bit-Check by Wera. Bit-Checks provide a quick overview of the tools available. Bits not needed are simply reinserted into the set and do not get lost. Simple transportation e.g. in the shirt pocket. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. Tough viscous for universal use. Includes universal holder for the take-up of bits with ¼” hexagon head drive as per DIN ISO 1173-C 6.3. Comes with quick-release chuck for rapid bit change; the strong permanent magnet holds the bits absolutely securely.

535,00 kr (428,00 kr)

På lager - 1-3 dager til levering

Wera 327 Valve Holder

Valve Holder, 32x70 mm

70,00 kr (56,00 kr)

På lager - 1-3 dager til levering

Wera Bit-Check 30 BiTorsion 1

Tough-absorbing bits for universal use. BiTorsion bits with an elastic torsion zone – where kinetic energy is diverted from peak loads – and softer BiTorsion zone to prevent the bit tip from twisting under high strain. This greatly extends the product service life. Offer the best possible service life with the appropriate holder. Comes with Rapidaptor technology, which allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward – for rapid bit change with just one hand. For the take-up of bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 und E 6.3. For insertion in the power screwdriver or into the chuck of the power drill. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera "Take it easy" Tool Finder with its colour coding and clearly visible imprint.

Ord. pris 557,00 kr

509,00 kr (407,20 kr)

På lager - 1-3 dager til levering

Wera Bit-Check 6 TX Universal 1

6 50 mm lange Wera TORX-biter pent ordnet i et minimum av plass i en praktisk Bit-Check. De tøffe viskøse bitene er egnet for universell bruk.

Ord. pris 211,00 kr

208,00 kr (166,40 kr)

På lager - 1-3 dager til levering

Wera 867/1 z torx® wedge bits tx 20x25mm

Wera 867/1 Z TORX skrutrekker bits 1 stykker

56,00 kr (44,80 kr)

På lager - 1-3 dager til levering

Wera Kraftform Kompakt 28

Skrutrekker med spiss- og sokkelsett

346,00 kr (276,80 kr)

Fjernlager, 4-6 dager til forsendelse

Bormaskin & Bits - Wera Kraftform Kompakt 100 - 05057460001

52-piece; in surface-protecting, compact textile box which is extremely robust. Low volume and weight for simplified mobility. Compact tool set with 52 screwdriving tools. 1 bit holder Rapidaptor with quick-release chuck; 1 B bit holder Rapidaptor with quick-release chuck for take-up in the power screwdriver or use in the chuck of the power drill; 30 BiTorsion bits with a length of 25 mm for long service life, tough-absorbing (BTZ), for universal use, extra hard (BTH), 12 Impaktor bits with a length of 50 mm for particularly demanding jobs, 8 L-keys with Hex-Plus profile (prevents the rounding of socket head screws) and hexagonal ballpoint on the long arm for working at angles; textile box that is very robust and durable; can be positioned upright for tidy storage on the workshop shelf; additional surface protection thanks to the outer textile material.

1 092,00 kr (873,60 kr)

Fjernlager, 4-6 dager til forsendelse

Wera Bit-Check 10 Impaktor 4

The Impaktor technology ensures an above-average longer service life even under extreme conditions. Increased frictional resistance from the rough diamond particles on the tip of the bit prevent any slipping out of the screw head. Impaktor holder to cushion any extreme impulse peaks. Special torsion effect thanks to the double torsion spring. Particularly suitable for use in conventional impact screwdrivers. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera "Take it easy" Tool Finder with its colour coding and clearly visible imprint.

531,00 kr (424,80 kr)

Fjernlager, 3-5 dager til forsendelse

Wera Bit-Safe 61 BiTorsion 1

Robust textile box with bits and holder, 61-piece. 49 BiTorsion bits for long service life, in diamond-coated design (BDC) for a secure fit in the screw head, tough-absorbing (BTZ), for universal use, extra hard (BTH); 11 bits, tough-absorbing (Z), for universal use. 1 universal holder 889/4/1 K with quick-release chuck for take-up in the power screwdriver or use in the chuck of the power drill. The profile and size of the bits are easy to recognise thanks to the Wera "Take it easy" Tool Finder with its colour coding and clearly visible imprint. The textile box allows users a high degree of mobility with a minimum space requirement. The greatly reduced weight of a set makes carrying far more pleasant. Sensitive surfaces are protected when the box is set down – yet the textile box is still very robust. The box and the tools will even survive a fall unscathed.

916,00 kr (732,80 kr)

Fjernlager, 3-5 dager til forsendelse

Wera Bit-Check 12 Diamond 1

Bits with tiny diamond particles on the bit tip. This ensures a secure fit in the screw head, reduces the contact pressure required and lowers the risk of slipping. BiTorsion bits with an elastic torsion zone – where kinetic energy is diverted from peak loads – and softer BiTorsion zone to prevent the bit tip from twisting under high strain. This greatly extends the product service life. Comes with Rapidaptor technology, which allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward – for rapid bit change with just one hand. For insertion in the power screwdriver or into the chuck of the power drill. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera "Take it easy" Tool Finder with its colour coding and clearly visible imprint.

415,00 kr (332,00 kr)

Fjernlager, 3-5 dager til forsendelse

Wera Bit-Check 6 V Universal 1

6 50 mm-long Wera bits tidily arranged in a minimum of space in a practical Bit-Check. The tough viscous bits are suitable for universal use. In the case of the Torsion bits (TZ), torque peaks are additionally absorbed in the Torsion zone. This prevents premature wear and enhances the service life.

141,00 kr (112,80 kr)

Fjernlager, 3-5 dager til forsendelse

Wera Bit-Check 7 TX Universal 1

Skrutrekkerspissett, 7 deler

117,00 kr (93,60 kr)

Fjernlager, 3-5 dager til forsendelse

Wera Terrace Construction Set T 1

Screwdriver bit and bit holder set, for tre, 21 deler, torx, phillips, pozidriv, torx with security pin

1 052,00 kr (841,60 kr)

Fjernlager, 3-5 dager til forsendelse

Wera 867/4 IMP DC Impaktor TORX® Bits

High quality bits for recessed TORX® screws. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers. ¼” hexagon, suitable for holders as per DIN ISO 1173-F 6.3.

395,00 kr (316,00 kr)

Fjernlager, 2-4 dager til forsendelse

Wera 897/4 r rapidaptor bitorsion universal bit holder 1/4 inch

Universal holder for bits with 14" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). BiTorsion holders by Wera have a torsion spring that absorbs low peak loads during screwdriving jobs. The combined use with BiTorsion bits and their torsion zones extends the service life of the tool considerably. BiTorsion holders by Wera can, however, also be used with conventional bits. The Rapidaptor technology allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward. This enables rapid bit change with just one hand. 14" hexagonal, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3.

389,00 kr (311,20 kr)

Fjernlager, 2-4 dager til forsendelse

Wera 897/4 IMP R SB Impaktor Halter mit Ringmagnet und

Wera Impaktor holder for the absorption of extreme impulse peaks. Special torsion effect thanks to the double-torsion spring. The Impaktor holder additionally holds long and heavy screws absolutely securely. This enables a rapid and dependable positioning of the screw. Ideal also for overhead work. Should, situation-related, the magnet not be desired e.g. when working with metal, it can be removed from the screwdriving zone and thereby be neutralised. Used mostly for manual power tool applications. Output: suitable for bits with ¼” hexagon head drive as per DIN ISO 1173-C 6.3. Drive: ¼” hexagon, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3.

393,00 kr (314,40 kr)

Bestillingsvare, 6-8 dager til forsendelse

Wera 893/4/1 k universal bit holder 1/4 inch x 50 mm

Universell holder for opptak av bits med 14" sekskantet hodedrift i henhold til DIN ISO 1173-C 6.3. Rustfri hylse for spesiell korrosjonsbeskyttelse. 14" sekskant, egnet for kraftskrutrekkere med et opptak i henhold til DIN ISO 1173-F 6.3.

99,00 kr (79,20 kr)

Fjernlager, 2-4 dager til forsendelse

Wera 853/4 ACR SL bit with sleeve magnetized PH 2 x 150 mm

Wera 853/4 ACR SL skrutrekker bits 1 stykker

259,00 kr (207,20 kr)

Fjernlager, 2-4 dager til forsendelse

Wera 894/4/1 K Universalhalter

Universell holder for opptak av bits med ¼” sekskantet hodedrift i henhold til DIN ISO 1173-C 6.3. Hurtigutløsningschuck for rask bitbytte. ¼” sekskantet, egnet for kraftskrutrekkere med opptak i henhold til DIN ISO 1173-F 6.3.

218,00 kr (174,40 kr)

Bestillingsvare, leveringstiden kan ikke opplyses.

Wera 870/4 adaptors 3/8 inch x 50 mm

Verktøyaksel (adapter) for kraftverktøysokler med sekskantet hodedrift fra Wera. Drift: 14 tommer sekskantet.

165,00 kr (132,00 kr)

Fjernlager, 2-4 dager til forsendelse

Wera 899/4/1 universal bit holder 1/4 inch x 75 mm x 1/4 inch

Wera 05053455001 skruetrekker bit-holder Rustfritt stål 25,4 / 4 mm (1 / 4") 1 stykker

122,00 kr (97,60 kr)

Fjernlager, 2-4 dager til forsendelse

Mandag - Torsdag:	9.00 - 15.00
Fredag - Søndag:	Stengt

Telefon: +47 35060606	+47 35060606
E-post privatkunder:	[email protected]
E-post bedriftskunder:	[email protected]

Wera 826 T Kraftform Turbo Driver

Wera Bit-Check 30 Diamond 1

Wera Bit-Check 30 Metal 1

Wera Bit-Check 30 TX Universal 1

Wera Bit-Check 7 Hex-Plus 1

Wera 327 Valve Holder

Wera Bit-Check 30 BiTorsion 1

Wera Bit-Check 6 TX Universal 1

Wera 867/1 z torx® wedge bits tx 20x25mm

Wera Kraftform Kompakt 28

Wera Kraftform Kompakt 100

Wera Bit-Check 10 Impaktor 4

Wera Bit-Safe 61 BiTorsion 1

Wera Bit-Check 12 Diamond 1

Wera Bit-Check 6 V Universal 1

Wera Bit-Check 7 TX Universal 1

Wera Terrace Construction Set T 1

Wera 867/4 IMP DC Impaktor TORX® Bits

Wera 897/4 r rapidaptor bitorsion universal bit holder 1/4 inch

Wera 897/4 IMP R SB Impaktor Halter mit Ringmagnet und

Wera 893/4/1 k universal bit holder 1/4 inch x 50 mm

Wera 853/4 ACR SL bit with sleeve magnetized PH 2 x 150 mm

Wera 894/4/1 K Universalhalter

Wera 870/4 adaptors 3/8 inch x 50 mm

Wera 899/4/1 universal bit holder 1/4 inch x 75 mm x 1/4 inch