Alu pex-systemer - side 14

Henco 50 x 32 mm PVDF trykkredusert kobling for vann-, varme- og kjøleanlegg. Maks. 16 bar.

HENCO 26X1 VISION trykk rett hunnkobling for vann-, varme- og kjøleanlegg, maks. 16 bar

HENCO 26X1/2 VISION trykkbøyd 90 grader hannadapter for vann-, varme- og kjøleanlegg, maks. 16 bar

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Henco 16 x 12 x 16 mm PVDF trykk-tee for vann-, varme- og kjøleanlegg. Maks. 16 bar.

Used with Roth alu-laserplus pipe and Roth tools

Henco 20 x 16 x 20 mm PVDF trykk-tee for vann-, varme- og kjøleanlegg. Maks. 16 bar.

HENCO 40X11/4 PVDF Trykkbøyd 90 grader for vann-, varme- og kjøleanlegg, maks. 16 bar

Bøyefjær HENCO, utvendig 16X2 mm, L = 500 mm

HENCO JAWS BE20X2

HENCO 20X16X16 mm VISION trykk-T-kobling for vann-, varme- og kjøleanlegg, maks. 16 bar

Viega 5318

Uponor 1046907 VVS-kobling Kranadapter

Henco 20 mm x 12 PVDF trykk rett hunnkobling for vann-, varme- og kjøleanlegg. Maks. 16 bar.

Henco 26 x 34 x 26 mm PVDF trykk T-kryss for vann-, varme- og kjøleanlegg. Maks. 16 bar.

Henco 50 mm x 112 PVDF trykk rett hunnkobling for vann-, varme- og kjøleanlegg. Maks. 16 bar.

Henco 32 x 1 x 32 mm PVDF trykk T-kryss for vann-, varme- og kjøleanlegg. Maks. 16 bar.

Henco 40 x 1 x 40 mm PVDF trykk T-kryss for vann-, varme- og kjøleanlegg. Maks. 16 bar.

HENCO 20X3/4 VISION trykk rett hannadapter for vann-, varme- og kjøleanlegg, maks. 16 bar

Henco 63 x 2 x 63 mm PVDF trykk T-hann for vann-, varme- og kjøleanlegg. Maks. 16 bar.

Henco 40 mm x 1 PVDF trykk rett hunnkobling for vann-, varme- og kjøleanlegg. Maks. 16 bar.

Henco 20 x 12 x 20 mm PVDF trykk-tee for vann-, varme- og kjøleanlegg.

Henco 20 x 16 mm PVDF trykkredusert kobling for vann-, varme- og kjøleanlegg. Maks. 16 bar.

Henco 63 x 63 mm PVDF trykkbøyd 90° for vann-, varme- og kjøleanlegg. Maks. 16 bar.

Henco 20 mm x 34 PVDF trykkbøyd 90° for vann-, varme- og kjøleanlegg. Maks. 16 bar.