IP 65, grått kabinett. Inkluderer PE-terminal, svart håndtak (I-O, ON-OFF indikasjon, velgertype håndtak i OTP_ og pistoltype håndtak i OT_ brytere). Også N-terminal opp til størrelse OTP 90. Gjengede knock-outs, kompresjonskoblinger må bestilles separat.

EMC sikkerhetsbryter 3-p.400V AC23A 15kW AC22A En plastkapsling IP65 Gul-rød Velgerhåndtak

Sikkerhetsbryter 3-p.400V AC23A 37kW AC22A 63A Plasthus IP65 Svart velgerhåndtak

Sikkerhetsbryter, 3-p. 400V AC23 25A, 11kW. Aluminiumskabinett. IP65. Grå sidebetjent håndtak. Låst deksel.

Frontbetjent bryter-disconnector. Typer OT 16...125 inkluderer beskyttede terminalklemmer, IP 20.

Avtagbar, monterbar separat på grunnplaten

MS116-1.6 manual motor starter is a compact 45 mm width devices with a rated operational current of Ie = 1.6 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 50 kA at 400 VAC and the trip class 10A. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory.

Dør CP3 2CEA000042L0546 fra ABB A/S

MS116-4.0 manual motor starter is a compact 45 mm width devices with a rated operational current of Ie = 4.0 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 50 kA at 400 VAC and the trip class 10A. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory.

System pro M compact S200 miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 and CSA 22.2 No. 235, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200 to save 50% space.

RCCBs F200-serien sikrer beskyttelse av mennesker og installasjoner mot feilstrøm til jord. Et stort tilbud for standard øyeblikkelig og selektiv AC- og A-typer er fullført med noen konfigurasjoner for spesielle applikasjoner.

Frontbetjent bryter-disconnector. Typer OT 16...125 inkluderer beskyttede terminalklemmer, IP 20.

Sikkerhetsbryter, IP 65, grå kapsling. Inkluderer PE-terminal, svart håndtak (I-O, ON-OFF indikasjon, velgertype håndtak i OTP_ og pistoltype håndtak i OT_ brytere). Også N-terminal opp til størrelse OTP 90. Gjengede knock-outs; kompresjonsgland må bestilles separat.

Frontbetjent bryter-disconnector. Typer OT 16...125 inkluderer beskyttede terminalklemmer, IP 20.

Frontbetjent bryter-disconnector. Typer OT 16...125 inkluderer beskyttede terminalklemmer, IP 20.

Dampsperring for TS1000 kabinett. Forebygger kondens

AF16Z contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF..Z contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...250 V 50/60 Hz or 12...250 V DC. AF..Z contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF..Z contactors allow direct control by PLC-output 24 V DC 500 mA and obtain a reduced holding coil consumption. AF..Z contactors withstand short voltage dips and voltage sags (SEMI F47-0706 compliance) between 24...250 V 50/60 Hz AF..Z contactors have built-in surge protection and do not require additional surge suppressors The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, 1 built-in auxiliary contact, front and side-mounted add-on auxiliary contact blocks. (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available.

MS116-2.5 manual motor starter is a compact 45 mm width devices with a rated operational current of Ie = 2.5 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 50 kA at 400 VAC and the trip class 10A. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory.

For brytere som betjenes forfra. Indikasjon i typer OHB_ og OHY_: I-O/ON-OFF, i typer OHG_: I-O. IP 65, NEMA 1,3R, 12, låsbar med tre hengelåser i AV-posisjonen, dørinterlock i PÅ-posisjonen (kan deaktiveres for å gi autorisert personell tilgang til inspeksjon). Akselen må bestilles separat. Skrufesting fra baksiden av håndtaket. Ingen skruer på forsiden sikrer dobbel isolasjon.

Sikkerhetsbryter, grått kabinett, IP 65. Inkluderer N- og PE-terminaler, 2 membran kabelgjennomføringer, 2 trekkstoppere, håndtak og hjelpekontakter. Rektangulært svart velgertype håndtak.

System pro M compact S200 miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 and CSA 22.2 No. 235, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200 to save 50% space.

B6-40-00 mini kontaktor er en kompakt 4-pol kontaktor med skrueterminaler. De egner seg ideelt for applikasjoner der pålitelighet er et must og plass er begrenset. Mini-kontaktorer brukes i boligbygg, næringsbygg og industrielle applikasjoner for kontroll av enkelt- eller trefasebelastninger opptil 4 kW (AC-3) og 20 A / 690 V (AC-1) eller bytting av kontrollsignaler. Videre funksjoner inkluderer stille spole, bryterposisjonsindikasjon og integrert mulighet for skinne eller veggmontering.

B6-30-10 mini kontaktoren er en kompakt 3-pol kontaktor med 1 hjelpekontakt og skrueklemmer. De egner seg ideelt for applikasjoner der pålitelighet er et must og plass er begrenset. Mini-kontaktorer brukes i boligbygg, næringsbygg og industrielle applikasjoner for kontroll av enkel eller trefasebelastninger opptil 4 kW (AC-3) og 20 A / 690 V (AC-1) eller bytting av kontrollsignaler. Videre funksjoner inkluderer stille spole, bryterposisjonsindikasjon og integrert mulighet for skinne eller veggmontering.

ABB KNX IP router connects the KNX bus with the Ethernet network. The device uses the KNXnet/IP protocol for communication (Routing and Tunneling).It can be used as a fast line and area coupler. The full filter table for main groups 0-31 is supported.KNX devices can be programmed via the LAN using ETS. For this and further clients 5 Tunneling Server are available.DIN 90X36X64 mm (H x W x D)The IP address can be fixed or can be received from a DHCP server. Power supply via 12..30 V DC or PoE.The KNX Standard Communication (Multicast) can be switched off. In this case, up to 10 IPR/S3.1.1 can communicate using unicast communication.

STRAIGHT FITTING FOR CONDUIT PAFS - FAST UTENPÅTRÅD FOR INNFØRING I TRÅDEDE INNGANGER OG KNOCKOUTS. MATERIALE: PA (NYLON) 66