FNIRSI WMT-10 Index Humidity Meter Hygrometer
The FNIRSI WMT-10 is a non invasive moisture meter designed for fast and accurate measurement of material humidity without damaging surfaces. It uses induction based sensing technology to measure moisture in wood, walls, floors and construction materials. The device offers four dedicated modes for softwood, hardwood, masonry and powder wall surfaces, covering a measurement range up to 75 percent with a resolution of 0.1 percent. A 2.4 inch TFT color display ensures clear readability, while a built in flashlight supports use in low light environments. The 1000 mAh rechargeable battery with USB C charging provides long operating time and convenience.
The meter operates in four optimized measurement modes. Softwood mode is calibrated for materials such as beech, spruce, birch and cherry. Hardwood mode is designed for denser species including oak, walnut, ash and teak. Masonry mode allows measurement of brick, stone and compacted ground structures. Powder wall mode is intended for plaster, concrete, lime-based coatings and similar surfaces. Each mode is calibrated to ensure accurate detection within a range of up to 75 percent moisture content, with a penetration depth of approximately 17 millimeters.
A highly sensitive induction sensor combined with an extended 40.5 × 40.5 cm measuring plate ensures stable readings over larger surface areas. The device provides both visual and audible alerts when preset thresholds are exceeded, enabling quick identification of damp zones. A hold function allows users to freeze measurements for review, while internal memory stores up to 30 readings for later comparison and analysis.
The FNIRSI WMT-10 is equipped with a 2.4 inch TFT color display that provides clear visualization of measurement data in all lighting conditions. A built in flashlight improves usability in dark environments such as basements or construction sites. The interface is designed for quick navigation and straightforward operation, supporting efficient workflow in professional settings.
Power is supplied by a 1000 mAh rechargeable lithium battery with USB C charging. The device includes automatic power off options adjustable to 5, 10 or 15 minutes to conserve energy. Its compact housing with anti slip coating ensures stable handling during use and easy transport in tool kits.
Performance highlights:
• Non invasive induction moisture measurement
• Four material modes for wood and construction surfaces
• Measurement range up to 75 percent with 0.1 percent resolution
• Large 40.5 × 40.5 cm sensing area
• 2.4 inch TFT display with clear visibility
• Audible and visual alarm system
• 1000 mAh USB C rechargeable battery
Ovenstående informasjon/spesifikasjoner er veiledende og kan uten varsel bli endret av produsenten. Det tas forbehold om trykkfeil og illustrerende bilder. Enkelte tekster kan være autogenerert eller maskinoversatt, så derfor kan det forekomme tekster som virker misvisende.