Varenummer: 3479115

Tech-Protect Glass UV+ 2-Pack Tempered Glass for Xiaomi Redmi Note 15 Pro+ 5G



Tech-Protect Glass UV+ is a tempered glass with UV application. The ultraviolet light curing technology makes the glass adhere perfectly to the screen, maintaining full transparency and touch sensitivity. The set includes two lenses and a UV lamp, so your device will be protected from day one.

The glass achieves a hardness of 9H on the Mohs scale, which means effective protection against keys, coins and other items that we carry in our pockets. The thickness of 0.3 mm maintains the slim profile of your smartphone and does not affect the responsiveness of the touchscreen. The material absorbs impact energy, protecting the display from cracks even when falling from a height. Thanks to UV technology, the glass also covers the curved edges of the screen, eliminating the formation of air bubbles.

The oleophobic coating reduces the visibility of fingerprints and makes it easier to clean the surface. The image remains crystal clear with faithful color reproduction, while the smooth surface of the glass maintains the precision of gestures and smooth scrolling. Once mounted, be sure to re-save your fingerprints so that the in-screen reader works optimally with the new protective layer.

* We do not recommend using 3D glass without any case.

** We do not recommend using glass if the case overlaps the edges of the screen too much, there is a risk of prying it open.

The functionality of the fingerprint reader in the screen may be slightly impaired if a foil or glass coating is installed. The fingerprint reader is not fully refined for additional coatings.

160,00 kr 128,00 kr eksl. mva
Rimeligste private frakt: 109,00 kr
Fjernlager, 6-8 dager til forsendelse

Specification

Type
UV Tempered Glass With UV Application
Coating
Oleophobic
Hardness
9H
Dimensions
159.80 x 75.00 mm
Compatibility
Xiaomi Redmi Note 15 Pro+ Plus 5G / Poco M8 Pro
The set includes

2 × Tech-Protect Glass UV+ Tempered Glass

1 × UV lamp

2 × Installation Kit

Assembly Instructions

Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a flash.
Tape the speaker with tape from the set.
Connect the UV lamp using a Type-C cable to a power source.
Pour the liquid right in the middle of the device.
Install the glass as evenly as you can, you can also correct this step before hardening the surface when the liquid is on the screen with the glass.
If a bubble of air has appeared, use an ATM card and gently push it out of the glass, this action is done before curing.
Using a UV lamp, cure the glass along the center in five places for 15 seconds and then around the edge for 10 seconds.
Clean your phone of any hardened glue residue.
If your device has an in-screen fingerprint reader, be sure to remove and re-add the fingerprints after installing the glass on the screen.
Enjoy a job well done!

Produsent
Varenummer
3479115
Model
5906302352821
Ean
5906302352821
Til produsentens hjemmeside

Ovenstående informasjon/spesifikasjoner er veiledende og kan uten varsel bli endret av produsenten. Det tas forbehold om trykkfeil og illustrerende bilder. Enkelte tekster kan være autogenerert eller maskinoversatt, så derfor kan det forekomme tekster som virker misvisende.