Varenummer: 3482216
myFirst Make 3D pen
3D-penn startsett lar barn i alderen 3 til 12 gi tegninger liv med 0.9 mm PCL-filament med lav varme, trådløs USB-lading og et design som er trygt å ta på.
myFirst Make 3D pen er laget for unge skapere med brukervennlige kontroller og rask størkning for morsom, interaktiv 3D-kunst og læring. Varmen holdes inne i enheten, mens det ikke-klebende filamentet er lett å rengjøre for problemfri kreativitet.
- Trådløs bruk med innebygd batteri og USB-lading
- Filament med lav varme størkner raskt
- Ikke-klebende materiale for enklere rengjøring
- Sikkert ytre som holder seg kjølig å ta på
- Barnevennlig, ufarlig PCL-filamentmateriale
Utformet for å tenne fantasien og hjelpe unge sinn å utforske praktisk 3D-skaping med selvtillit.
544,00 kr
435,20 kr eksl. mva
Rimeligste private frakt: 109,00 kr
Fjernlager, 2-4 dager til forsendelse
3D Art for Young Creators
Our 3D Pen starter kit lets kids aged 3 to 12 bring their drawings to life, exploring the magic of 3D creation.
Imagination Unleashed
Specially designed for young creators, this 3D Pen allows them to turn their ideas into three-dimensional masterpieces.
User-Friendly and Safe
With easy-to-use controls and a safe design, this 3D pen offers a creative outlet that's perfect for young minds, sparking their creativity and artistic skills.
Fun and Interactive
Watch as they craft and construct with ease, all while having a blast and learning in an interactive way.
Wireless Convenience
Features an inbuilt battery with USB charging, eliminating the need for wires, ensuring easy usage and movement.
Rapid Solidification
Utilizes low-heat filament for fast solidification, with non-adhesive material that is easy to clean off.
Safe to Touch
The device's heat doesn't transfer to the exterior, ensuring the child's safety. The filament is made from non-harmful PCL materials.
Bring Your Kid's Drawings to Life!
myFirst 3dPen Make is designed to add joy to your child’s learning process. After all, drawing is the building block for learning new complex concepts. Journey with us as we build big minds together!
Safe to Touch
Safety first, folks! With the awesome myFirst 3dPen Make, you don't have to worry about little hands getting burnt because the heat stays on the inside.
Plus, the filaments are made from kid-friendly PCL materials, so they're totally safe to touch. Fun and worry-free creativity all the way!
Operate Wirelessly
myFirst 3dPen Make has a built-in battery and charges via USB, so no pesky wires to deal with while you kids are getting creative. Super convenient, right?
Rapid Solidification
Get this: myFirst 3dPen Make uses specially made low-heat filament that solidifies super fast! And the best part? The material is non-adhesive, so cleaning up is a breeze. Say goodbye to sticky messes and hello to hassle-free creativity!
More About PCL Filaments
Get ready to dive into a rainbow of creativity! You can easily find multi-colored filaments to bring your ideas to life. And guess what? The filaments are made of Polycaprolactone (PCL), a biodegradable polyester that's super easy to work with.
With a melting point of around 60°C, it's soft at room temperature, giving you endless possibilities for your projects!
Our 3D Pen starter kit lets kids aged 3 to 12 bring their drawings to life, exploring the magic of 3D creation.
Imagination Unleashed
Specially designed for young creators, this 3D Pen allows them to turn their ideas into three-dimensional masterpieces.
User-Friendly and Safe
With easy-to-use controls and a safe design, this 3D pen offers a creative outlet that's perfect for young minds, sparking their creativity and artistic skills.
Fun and Interactive
Watch as they craft and construct with ease, all while having a blast and learning in an interactive way.
Wireless Convenience
Features an inbuilt battery with USB charging, eliminating the need for wires, ensuring easy usage and movement.
Rapid Solidification
Utilizes low-heat filament for fast solidification, with non-adhesive material that is easy to clean off.
Safe to Touch
The device's heat doesn't transfer to the exterior, ensuring the child's safety. The filament is made from non-harmful PCL materials.
Bring Your Kid's Drawings to Life!
myFirst 3dPen Make is designed to add joy to your child’s learning process. After all, drawing is the building block for learning new complex concepts. Journey with us as we build big minds together!
Safe to Touch
Safety first, folks! With the awesome myFirst 3dPen Make, you don't have to worry about little hands getting burnt because the heat stays on the inside.
Plus, the filaments are made from kid-friendly PCL materials, so they're totally safe to touch. Fun and worry-free creativity all the way!
Operate Wirelessly
myFirst 3dPen Make has a built-in battery and charges via USB, so no pesky wires to deal with while you kids are getting creative. Super convenient, right?
Rapid Solidification
Get this: myFirst 3dPen Make uses specially made low-heat filament that solidifies super fast! And the best part? The material is non-adhesive, so cleaning up is a breeze. Say goodbye to sticky messes and hello to hassle-free creativity!
More About PCL Filaments
Get ready to dive into a rainbow of creativity! You can easily find multi-colored filaments to bring your ideas to life. And guess what? The filaments are made of Polycaprolactone (PCL), a biodegradable polyester that's super easy to work with.
With a melting point of around 60°C, it's soft at room temperature, giving you endless possibilities for your projects!
Produsent
Varenummer
3482216
Model
FP3304SA-BE01
Ean
850031616257
Til produsentens hjemmeside
Produktbeskrivelse
myFirst 3dPen Make - 3D-skriverpenn
Skrivertype
3D-skriverpenn - FDM/FFF
Produktformfaktor
Bærbar
Vekt
46 g
Støttede byggematerialer
Polycaprolactone (PCL)
Skriverfunksjoner
Adjustable temperature, adjustable molding speed, built-in rechargeable battery
Eksteriørfarge
Blå
Dimensjoner (BxDxH)
14.2 cm x 2.9 cm x 2.6 cm
Generelt
Skrivertype
3D-skriverpenn
Teknologi
Fused Deposition Modeling (FDM)/Fused Filament Fabrication (FFF)
Eksteriørfarge
Blå
Skriver
Skriverfunksjoner
Adjustable temperature, adjustable molding speed, built-in rechargeable battery
Mediehåndtering
Støttede byggematerialer
Polycaprolactone (PCL)
Dysediameter
0.9 mm
Filamentdiameter
1.75 mm
Diverse
Tilleggsutstyr inkludert
Templates, 2 stickers, thermoplastic sheet
Medfølgende kabler
1 x mikro-USB ladekabel
Forbruksvarer inkludert
1 x PCL filament (light pink)
1 x PCL filament (svart)
1 x PCL filament (blå)
1 x PCL filament (light blue)
1 x PCL filament (gul)
1 x PCL filament (rød)
1 x PCL filament (light green)
1 x PCL filament (grønn)
1 x PCL filament (purpur)
1 x PCL filament (svart)
1 x PCL filament (blå)
1 x PCL filament (light blue)
1 x PCL filament (gul)
1 x PCL filament (rød)
1 x PCL filament (light green)
1 x PCL filament (grønn)
1 x PCL filament (purpur)
Strømforsyning
Strømenhet
Strømforsyning (ikke inkludert)
Størrelser og vekt
Bredde
14.2 cm
Dybde
2.9 cm
Høyde
2.6 cm
Vekt
46 g
Ovenstående informasjon/spesifikasjoner er veiledende og kan uten varsel bli endret av produsenten. Det tas forbehold om trykkfeil og illustrerende bilder. Enkelte tekster kan være autogenerert eller maskinoversatt, så derfor kan det forekomme tekster som virker misvisende.