Varenummer: 3537514
BLACK WEEK NYHET FEELWORLD INNLEDENDE TILBUD

FEELWORLD LUT11S 25.6 cm (10.1") 1920 x 1200 pixels IPS 16:10 16.7 million colours 2000 cd/m²

Kameramonitor FEELWORLD LUT11S er en 10.1-tommers profesjonell skjerm med full berøringskontroll, 1920 x 1200 IPS-oppløsning, 2000 cd/m² lysstyrke, 3G-SDI og opptil 4K@60Hz HDMI-signal inn og ut.

Utviklet for feltopptak, regissørovervåking, fokus-pulling og etterarbeid kombinerer den tydelig bildeovervåking med berøringsbetjening, en intuitiv UI-meny og praktiske strømalternativer for kamerarigger.

  • 10.1-tommers IPS-panel med 16:10-format og 16.7 millioner farger
  • 2000 nit dagslys-synlig lysstyrke med omgivelseslyssensor for automatisk dimming
  • Full berøringsskjermkontroll med trykk- og sveipebevegelser
  • Tre tilpassede hurtigtastknapper for rask tilgang til overvåkingsfunksjoner
  • SDI, doble HDMI-innganger, HDMI-utgang og 3.5 mm hodetelefonovervåking
  • Bakre F970 ekstern installasjon og strømpakke for tilbehør som trådløs overføring eller LED-lys
  • Doble NP-F-batteriplater for utvidet utendørs overvåking

FEELWORLD LUT11S gir kamerateam en lyssterk, detaljert og fleksibel overvåkingsløsning for krevende opptaksmiljøer.

Ord. pris 3 638,00 kr
3 439,20 kr
2 751,36 kr eksl. mva
Begrenset antall, maks. 5 stk. per kunde
Kampanjen kjører fra 20-11-2026 00:00 til 30-11-2026 23:59. Kampanjeprisen gjelder kun et begrenset antall varer. Når disse er solgt, selges varen igjen til normalpris.
Gratis frakt (privatkunde)
Bestillingsvare, leveringstiden kan ikke opplyses.
Lader følger med
Charger included

10.1-inch Professional SDI/HDMI Camera Monitor

FEELWORLD LUT11S is a 10.1-inch with full touch screen, ultra brightness 2000nit professional camera monitor. Supports 3G-SDI and up to 4K@60Hz HDMI signal input and output. Provides a series monitoring and framing tools with new menu layout, various numerical parameters are clear at a glance, making the operation easier. There is a F970 external install and power kit on the rear of LUT11S, which can install such as wireless transmission, LED light, etc. It combines the monitor with wireless transmission to get rid of unnecessary cables, , which is perfect for director monitoring, 1st AC to focus pulling in the film crew. The dual battery plates design can install two F970 batteries at the same time for long-time power supply even outdoors. Ideal for crew field shooting, monitoring and post-production.

10.1” LCD Full HD Resolution

Viewing clearly and capture every detail with confidence

The LUT11S comes with a 10.1-inch 1920x1200 full HD panel, has excellent color reproduction. The wide 170º viewing angle makes it easy for multiple members of the crew to watch it at the same time.

2000nit Daylight Viewable

Ideal for outdoor shooting

With the support of 2000 nits of ultra-high brightness, LUT11S is not afraid of strong light. And the outdoor shooting screen display is clearly visible, you can shoot without a sunshade.

Light Sensor for Auto Dimming

The LUT11S has an ambient light sensor, from a dim studio to a sunny location, from midnight moonlight to noon sunshine, it can automatically adjust the monitor brightness to fit your filming environment.

New UI Menu, More Intuitive and Intelligent

LUT11S adopts new UI menu, take the software functions are iconized, it is more convenient and quickly to operate the function.

Custom Shortcut Keys

On the top of LUT11S comes with three custom shortcut buttons , the photographer can set the shortcut functions in advance according to the actual needs of the shooting site, and quickly call up the required functions during the shooting process, greatly improving the shooting efficiency.

Full Touch Screen Design

Easy and sensitive operation, make your filming more efficiency

The innovative touch screen LCD user interface provides incredible control. You can use simple tap and swipe gestures for the important monitoring functions without buttons. Plus, you can also operate via scroll wheel key.

Touch Screen Operating Instruction

1. When the monitor and touch are both on, continuously click the screen twice to enter the main menu.
2. Swipe up from the bottom of the screen to open the shortcut menu and click on the corresponding menu to open or set the corresponding function. Double-click the shortcut menu function and select the function setting with the "<" or ">" key.
3. On the left side of the screen (1/2 split screen), you can directly adjust the brightness of the screen backlight; on the right side of the screen (1/2 split screen), you can directly adjust the volume.
4. Click any space beside the menu to exit.

Innovative External Install and Power Design

Simplify your photography equipment

A Sony F970 external install and power kit design is added to the back of the monitor. The external kit can be used to install and install the external equipment, like wireless transmission, LED light, video converter and others that can be powered by a Sony F970 battery. This innovative external power supply design meets the need to power for external wireless transmission, LED light and other equipment, greatly saving the space occupied by the equipment and reducing the weight of photography equipment. The kit has two cross slots, you can adjust the position of the external device by loosening the screws. When you don't need the kit, you can directly loosen the screws to remove the kit.

SDI+Dual HDMI, More Interfaces Selection

Compatible with movie cameras, DSLR cameras

SDI perfect for the movie cameras, dual HDMI signal inputs are easily matched with SLR camera and one output, support up to 4K@60Hz, which is transmitting without loss and the screen is more smooth and clear. And provides 3.5mm headphone jack to monitor audio.

Note: HDMI1 input default to loop-out from HDMI1 output, HDMI2 can’t loop-out

DC Power Supply

Power your DSLR or mirrorless camera

The LUT11S is not only equipped with DC IN 12V (suit for use 12/3A adapter), but also provides auxiliary power out (DC OUT 8V) allowing shooters to power their cameras. With a battery adapter cable (Optional), the LUT11S extends camera run-time, while providing a more usable display.
Barrel output for powering your camera with a separately available DC coupler via adaptor (NP-FW50 Sony & LP-E6 Canon & DMW-BLF19 Panasonic). More adapters coming soon.

Note: since different brands and models of cameras require different power for normal operation, the camera may not be able to take pictures or video normally. Therefore, when using batteries to power the monitor, in order to use the camera normally, it is recommended to use a large-capacity fully charged battery.

Dual Battery Plates

Long-lasting power for outdoor shooting

The rear of monitor of LUT11S have dual battery plates, can install two standard NP-F batteries, long-lasting power for your screen. In addition, you can switch the battery quickly, just double tap the battery icon on the upper right corner of the monitor about 3 seconds to finish the switching, and don’t worry interrupting monitoring. Install one F970 battery (6600mah) last for about 2 hours, and install two F970 batteries last for about 3.5-4 hours. You can choose install 1 or 2 battery base on your need.

● Compatible Sony NP-F Battery: F970 F960 F950 F930 F770 F750 F730 F570 F550 F530 series (Note: the battery not including, please purchase separately. Higher capability (working time) will be longer)

Produsent
Varenummer
3537514
Model
LUT11S
Ean
6971863815800
Til produsentens hjemmeside
Skjermdiagonal
25,6 cm (10.1")
Skjermoppløsning
1920 x 1200 piksler
LED-baklys
Ja
Berøringsskjerm
Ja
Skjermteknologi
IPS
Størrelseforhold
16:10
Display antall farger
16,7 millioner farger
Lysstyrke for skjerm
2000 cd/m²
Synsvinkel, horisontal
85°
Synsvinkel, vertikal
85°
Kontrastforhold
800:1
Støttede videofunksjoner
480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Produktfarge
Svart
Antall skjermer
1
Tilkoblings-gjenge
1/4"
Antall HDMI-porter
3
HDMI inn
2
HDMI-utgang
Ja
Hodetelefon ut
Ja
3,5 mm inn
Ja
Type strømforsyning
DC
Inngangsspenning
7-24 V
Strømforbruk (maks.)
28 W
Driftstemperatur (T-T)
-10 - 50 °C
Oppbevaringstemperaturomåde (Celsius)
-20 - 60 °C
Bredde
242 mm
Dybde
23 mm
Høyde
165 mm
Vekt
810 g
Pakkebredde
265 mm
Pakkedybde
110 mm
Pakkehøyde
212 mm
Pakkevekt
17,4 kg
Pakketype
Box
Kabler inkludert
Mini-HDMI
AC-adapter inkludert
Ja
Bruksanvisning
Ja

Skjerm

Skjermdiagonal
25,6 cm (10.1")
Skjermoppløsning
1920 x 1200 piksler
LED-baklys
Ja
Berøringsskjerm
Ja
Skjermteknologi
IPS
Størrelseforhold
16:10
Display antall farger
16,7 millioner farger
Lysstyrke for skjerm
2000 cd/m²
Synsvinkel, horisontal
85°
Synsvinkel, vertikal
85°
Kontrastforhold
800:1

Egenskaper

Støttede videofunksjoner
480i, 480p, 576i, 576p, 720p, 1080i, 1080p

Design

Produktfarge
Svart
Antall skjermer
1
Tilkoblings-gjenge
1/4"

Tilkoblingsevne

Antall HDMI-porter
3
HDMI inn
2
HDMI-utgang
Ja
Hodetelefon ut
Ja
3,5 mm inn
Ja

Energihåndtering

Type strømforsyning
DC
Inngangsspenning
7-24 V
Strømforbruk (maks.)
28 W

Miljømessige forhold

Driftstemperatur (T-T)
-10 - 50 °C
Oppbevaringstemperaturomåde (Celsius)
-20 - 60 °C

Vekt og dimensjoner

Bredde
242 mm
Dybde
23 mm
Høyde
165 mm
Vekt
810 g
Pakkebredde
265 mm
Pakkedybde
110 mm
Pakkehøyde
212 mm
Pakkevekt
17,4 kg
Pakketype
Box

Emballasjeinnhold

Kabler inkludert
Mini-HDMI
AC-adapter inkludert
Ja
Bruksanvisning
Ja

Ovenstående informasjon/spesifikasjoner er veiledende og kan uten varsel bli endret av produsenten. Det tas forbehold om trykkfeil og illustrerende bilder. Enkelte tekster kan være autogenerert eller maskinoversatt, så derfor kan det forekomme tekster som virker misvisende.