Sunlu PLA Filament - Shiny Blue
SUNLU PLA Twinkling Shiny Blue gives standard PLA prints a shimmering finish without requiring additional surface treatment. The 1.75 mm filament has a diameter tolerance of ±0.02 mm, supporting stable material feeding and even layers. It is recommended for printing at 205–215°C and 50–100 mm/s. With a tensile strength of 6–11 kgf and a stable flow rate of 7–9 g/10 min, the filament is suitable for decorative models as well as functional parts where the blue sparkle is part of the design.
The filament has a diameter of 1.75 mm with a tolerance of ±0.02 mm, helping maintain stable feeding and uniform extrusion throughout the print. A printing temperature of 205–215°C and speed of 50–100 mm/s are recommended. The material can also be printed without a heated bed or with the bed set to 50–65°C, depending on the printer and setup.
With a tensile strength of 6–11 kgf and a flow rate of 7–9 g/10 min, the filament is suitable for more than purely decorative models. It can be used for functional parts where the distinctive shiny blue finish is also desired. SUNLU PLA Twinkling is compatible with most FDM printers, including models from SUNLU, Creality, and Anycubic.
Ovenstående informasjon/spesifikasjoner er veiledende og kan uten varsel bli endret av produsenten. Det tas forbehold om trykkfeil og illustrerende bilder. Enkelte tekster kan være autogenerert eller maskinoversatt, så derfor kan det forekomme tekster som virker misvisende.