ANYCUBIC Water-Wash Resin 2.0 - Transparent
ANYCUBIC Water-Wash Resin 2.0 is a photopolymer resin for LCD and DLP 3D printers using 405 nm UV curing. Its hydrophilic formula allows resin residue to be removed with water instead of IPA alcohol, simplifying post-processing. With a viscosity of 190–230 mPa·s, volumetric shrinkage of 2.2–5.5% and a stated printing precision of 0.15 mm, it produces detailed models with smooth surfaces. The resin also offers 16–22% elongation at break, increased crack resistance, reduced odor and improved resistance to yellowing.
Les mer om Anycubic her
The resin combines a viscosity of 190–230 mPa·s with volumetric shrinkage of 2.2–5.5%, supporting smooth material flow and detailed prints. A stated printing precision of 0.15 mm enables accurate reproduction of fine model features, while 16–22% elongation at break provides increased resistance to cracking and deformation after curing. Improved build plate adhesion also helps reduce the risk of failed prints.
Finished models have a smooth surface and transparent appearance. The improved formulation helps limit yellowing, while the reduced-odor composition is suited to longer printing sessions. The resin maintains low viscosity at temperatures between 15°C and 20°C and is compatible with LCD and DLP printers using 405 nm UV curing.
Ovenstående informasjon/spesifikasjoner er veiledende og kan uten varsel bli endret av produsenten. Det tas forbehold om trykkfeil og illustrerende bilder. Enkelte tekster kan være autogenerert eller maskinoversatt, så derfor kan det forekomme tekster som virker misvisende.