Drivere, spoler og transformatorer

Product features • Line frequency: 50...60 Hz • RI suppression: to EN 55015 (A1: 2007)/CISPR 15, EN 55022 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 • Safety: to EN 61347 • Electrical isolation between the primary side and the secondary side • Short-circuit protection, overload protection, overtemperature protection: electronically reversible • Switching between electronic transformer and lamp not permitted Product benefits • Dimmable on the leading edge and trailing edge • Very low power loss thanks to high efficiency • Strain relief suitable for different cable types (HTM) • Suitable for space-critical installation thanks to compact functional design • Extremely compact transformer for highly space-critical installation conditions (HTN) • Protective operation throughout the entire partial-load range for long lamp life Areas of application • Effect and accent lighting • Living rooms • Object lighting • Conference rooms • Restaurants • Recessed and surface-mounted furniture fixtures • Shop lighting • Event rooms

• LED drivers for mini downlights (350mA), 6 outputs
• Built-in thermofuse with auto reset
• Quick and easy installation
• Can be fastened by screws
• Do NOT plug in any LED lamps, when connected to power

Rask LED-strømforsyning, 15W, 12Vdc, Ip20Super tynn LED-driver.

Product features • Line frequency: 50...60 Hz • RI suppression: to EN 55015 (A1: 2007)/CISPR 15, EN 55022 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 • Safety: to EN 61347 • Electrical isolation between the primary side and the secondary side • Short-circuit protection, overload protection, overtemperature protection: electronically reversible • Switching between electronic transformer and lamp not permitted Product benefits • Dimmable on the leading edge and trailing edge • Very low power loss thanks to high efficiency • Strain relief suitable for different cable types (HTM) • Suitable for space-critical installation thanks to compact functional design • Extremely compact transformer for highly space-critical installation conditions (HTN) • Protective operation throughout the entire partial-load range for long lamp life Areas of application • Effect and accent lighting • Living rooms • Object lighting • Conference rooms • Restaurants • Recessed and surface-mounted furniture fixtures • Shop lighting • Event rooms

Rask LED-strømforsyning, 30W, 24Vdc og IP20Super tynn LED-driver.

Electronic LED transformer 0-70W

DRIVER 30W DIM. M/MONTERINGSBOKS OG PLUGG

LED-driver HiluX D1 Gen3 er en dimbar driver for 1-4 spotter fra HiluX.

Denne kompakte LED-driveren er beregnet for spotbelysningsoppsett der dimmefunksjonalitet er påkrevd.

Et praktisk valg for å installere eller erstatte en dimbar LED-spotdriver med HiluX D1 Gen3-kompatibilitet.

Rask LED-strømforsyning, 20W, 12Vdc, Ip20Super tynn LED-driver.

Robust design, compact formHF-Matchbox Red is an affordable, reliable, compact, lightweight and high-frequency ballast for use with system wattages below 25 W in combination with TL mini, TL-D, TL5 and TL5c, PL-T/C, and PL-L/S lamps. The HF-M Red range has a robust design, meets all relevant international safety and performance standards and has an energy efficiency index (CELMA EEI) of A2. Product Benefits • Can be operated with movement-detection control systems. • Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping. • Suitable for use in class I or class II luminairesProduct Features • Over 60,000 on/off switches on one lamp (depending on lamp/ballast combination) • Suitable for emergency DC operation between 190 and 254 V • Programmed, flicker-free, pre-heated start (<0.8 s) which allows the lamp to be switched on and off without reducing useful lamp lifeApplication • Used with movement-detection control systems like Philips OccuPlus • Mainly for indoor applications such as spotlights, downlights, light boxes, and emergency and security fixtures used largely in retail stores, office buildings, hotels, private homes and residential buildings • Domestic applications such as outdoor garden lighting, garage areas, stairways

An energy-efficient solutionHF-Performer III TL5 is a slim and high-frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Product Benefits • Optimal savings can be achieved using HF-PIII together with TL5 ECO lamps (system solution). • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Suitable for luminaires in protection class I and, after testing, class IIApplications • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lot

Elektronisk ballast for HF-spoler til 2x14, 21, 28, 35S T5

An energy-efficient solutionHF-Performer III TL-D is a slim and high-frequency electronic ballast for TL-D fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections. Product Benefits • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Smart power ensures constant light, irrespective of mains-voltage fluctuations • Suitable for luminaires in protection class I and, after testing, class II • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Application • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lots

ECG for FL and CFL - not dimmable. Product benefits: • Long lamp life • No adverse effect from frequent on/off switching • Automatic restart after lamp replacement • Perfect lamp start for applications with motion sensors • VDE/VDE EMC certified system • Very high energy efficiency due to cut-off technology • Areas of application: • Emergency lighting systems acc. to EN 50172 / DIN VDE 0108-100, industry, open-plan offices, corridors and storage rooms, public buildings, sports halls and factories, strip lighting • Suitable for emergency lighting (DC operation) • Modernization of existing systems. Product features: • Supply voltage: 220...240 V • Line voltage: 198...264 V • Line frequency: 0 Hz, 50 Hz...60 Hz • Lamp start with optimum filament preheating • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate) • Energy Efficiency Index EEI: A2 BAT • Automatic shutdown of defective lamps and at end of life (EoL T.2) • Safety: to EN 61347-2-3 • Lamp operation: to EN 60929

Digitale tenningssystemer for maksimal pålitelighet HID-tenningssystemer for seriekretser Fordeler med produktet • Enkel installasjon og kabling • Kan brukes med både semi-parallelle og serie ballaster • Digitale tenningssystemer sikrer maksimal pålitelighet Produktfunksjoner • Tennere utstyrt med skruterminalblokker som standard • Serie tennere vil bare fungere i seriekretser Applikasjoner • Utendørs belysning (mest populære applikasjon: vei- og tunnelbelysning) System • Elektromagnetisk system krever ballast, tenningsenhet og kondensator • Designet for å fungere bare i seriekretser • Ingen tenningsenhet er nødvendig for SON-I-lamper

Robust design, compact formHF-Matchbox Red is an affordable, reliable, compact, lightweight and high-frequency ballast for use with system wattages below 25 W in combination with TL mini, TL-D, TL5 and TL5c, PL-T/C, and PL-L/S lamps. The HF-M Red range has a robust design, meets all relevant international safety and performance standards and has an energy efficiency index (CELMA EEI) of A2. Product Benefits • Can be operated with movement-detection control systems. • Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping. • Suitable for use in class I or class II luminairesProduct Features • Over 60,000 on/off switches on one lamp (depending on lamp/ballast combination) • Suitable for emergency DC operation between 190 and 254 V • Programmed, flicker-free, pre-heated start (<0.8 s) which allows the lamp to be switched on and off without reducing useful lamp lifeApplication • Used with movement-detection control systems like Philips OccuPlus • Mainly for indoor applications such as spotlights, downlights, light boxes, and emergency and security fixtures used largely in retail stores, office buildings, hotels, private homes and residential buildings • Domestic applications such as outdoor garden lighting, garage areas, stairways

Snappy LED power supply - 350 mA, 6W, Ip20Super slim LED driver.

An energy-efficient solutionHF-Performer III TL5 is a slim and high-frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Product Benefits • Optimal savings can be achieved using HF-PIII together with TL5 ECO lamps (system solution). • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Suitable for luminaires in protection class I and, after testing, class IIApplications • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lot

Dimbar Snappy LED-strømforsyning, 75W, 24Vdc og IP20. LED-strømforsyning som kan dempes med en standard frontkant eller bakre kant dimmer.

Sense driver kit.DALI dimming.50,000 hours life.IP20, KL II.Driver and panel coupled via quick coupler, and drives attached top panel via double stick down pillow, with an optional location for easy installation.Driver kit incl. mounting box with tool-free mounting with quick clips and strain relief.SG SECURITY with 5 year guarantee on the luminaire and lamp.FITS TOSENSE OPAL 3000/4000 LED 3000K, 22W, 2702 lumensSENSE OPAL 3000/4000 LED 4000K, 22W, 2816 lumensSENSE PRISM 3000/4000 LED 3000K, 22W, 2619 lumensSENSE PRISM 3000/4000 LED 4000K, 22W, 2741 lumensACCESSORIESWinsta WAGO connectors with 2 or 4 meter cable.

• LED driver for cabinet lighting and mini downlights (350mA), 6 outputs
• Dimmable – leading or trailing edge
• Built-in thermofuse with auto reset
• Quick and easy installation
• Can be fastened by screws
• Do NOT plug in any LED lamps, when connected to power

Mean Well LED strømforsyning, 200W, 24Vdc og Ip67. LED-driveren er egnet for både innendørs og utendørs bruk og våtrom på grunn av IP-beskyttelsesklasse 67.

Driver 18W 350 mA er en dimbar driver levert med en fordelingsboks med 6 utganger for praktisk belysningsinstallasjon.

Denne driveren er designet for bruk med vanlige dimmere på markedet og tilhører en driverserie som finnes i 4W-, 9W-, 18W- og 25W-versjoner.

• 18W-driver med 350 mA utgang
• Dimbar med vanlige dimmere
• Inkluderer fordelingsboks med 6 utganger

Et funksjonelt valg for tilkobling og dimming av kompatible belysningsoppsett.

Dimming the next step in energy savingThis intelligent high-frequency electronic dimming ballast utilizes the DALI or Touch and Dim push-button protocol for fluorescent lamps. It meets A1BAT requirements, thereby pre-empting upcoming legislation. With a special command you can retrieve the system’s mains power consumption, and with another you can find out which lamp wattage is connected. Combined with controls, additional energy savings can be achieved. Product Benefits • Extremely low stand-by losses, controlled cut-off for dim levels above 80%, hybrid control dimming (current control at 100% and power control at 1%) – combined with MASTER TL5 Eco the most energy-efficient solution • HF operation improves light quality and lamp lifetime. • Compliant with European and Asian norms and suitable for emergency lighting systemsProduct Features • HF-R Intelligent recognizes what type of lamp (T5 HE, HO, ECO, TL-D, PL-L) is connected and drives it accordingly • Programmed start: flicker-free ignition < 1.0 second and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations and dimming from 1 to 100% • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacement • Programmable for intelligent functionalities via Philips MultiOne: Corridor mode, Emergency DC dim level, Burn-in timeEnvironment • The HF-R intelligent will recognize which lamp is connected and will drive it accordingly • Extremely low energy consumption in stand-by (0.25 W) • Optimized for MASTER TL5 Eco lamps • RoHS and ISO 14000-compliant • EEI = A1 BAT (Best available technology)Application • Indoor, general and task lighting applications in combination with lighting control systems (personal con

LED-transformator 24 V (DC)/50 W
24 V DC for LED-er opp til totalt 50 W belastning