Varenummer: 3063123
HERMA Stickers Decor Christmas Classic Display (60)
HERMA DISPL. DECOR WEIHN. KLASSIKER (60) dekorativt klistremerke
850,00 kr
680,00 kr eksl. mva
Rimeligste private frakt: 109,00 kr
Fjernlager, 3-5 dager til forsendelse
Application and use
The surface of HERMAlaser opaque offers good printability with most inkjet printers and xerographic printing systems. We recommend preliminary suitability tests.
The paper is of captivating opacity and thus particularly suited for the labelling of surfaces which have to be obscured.
Applications include labels for file folders, CD labels and barcode labels in the logistics chain. Water-based inks may have an adverse influence on the flatness of the sheet stock. We therefore advise against the use of water-based inks especially when printing large areas.
The adhesive 62Gpt shows a very high tack even on cold surfaces down to -10 °C. Due to the high initial tack even on moist surfaces 62Gpt is particularly suited for labelling polar and nonpolar surfaces such as plastic containers, film wrappings and other packaging materials. The 62Gpt suits especially well for fast running dispensers, in which the initial tack has to be built up extremely quickly as f.ex. when the labels are blown on the substrate.Once labelled the adhesive is highly waterproof.
This coated kraft liner has been designed for production of label sheets for copiers and laser printers. The reverse of the paper assures excellent processing characteristics, i.e. high friction combined with high abrasion resistance.
Processing
Excellent die-cutting characteristics on all customary machines.
HERMA KW (512) was designed for sheeting. It is less suitable for conversions where waste-stripping is involved.
Storage conditions
Storing at a temperature of 20 ± 5 °C, a relative humidity of 45 ± 5 % and a dark storage is recommended. Moisture, heat and direct sunlight have to be avoided.
The shelf life is two years from date of production.
Regulations concerning contact with food
The reverse side coating does not comply with the German BfR Recommendation XXXVI (direct contact with food).All ingredients of adhesive 62Gpt comply with recommendation BfR XIV or FDA 21 CFR 175.105 (Adhesives).The pressure-sensitive adhesive 62Gpt can be safely used for the back coating of labels for the labelling of foodstuffs for storage at room temperature and below. It may be used in direct contact with dry, moist and fatty foodstuffs that can be assigned a correction factor of at least 3 in accordance with Regulation (EU) No. 10/2011. Furthermore, the adhesive may be used for laminating various materials. In this case, cut edge contact with food is harmless as far as the above mentioned adhesive is concerned. It must be ensured that the relevant migration limits are complied with by the laminated packaging (Declaration of no objection valid until 10.10.2025).The paper complies with recommendation BfR XXXVI.
The surface of HERMAlaser opaque offers good printability with most inkjet printers and xerographic printing systems. We recommend preliminary suitability tests.
The paper is of captivating opacity and thus particularly suited for the labelling of surfaces which have to be obscured.
Applications include labels for file folders, CD labels and barcode labels in the logistics chain. Water-based inks may have an adverse influence on the flatness of the sheet stock. We therefore advise against the use of water-based inks especially when printing large areas.
The adhesive 62Gpt shows a very high tack even on cold surfaces down to -10 °C. Due to the high initial tack even on moist surfaces 62Gpt is particularly suited for labelling polar and nonpolar surfaces such as plastic containers, film wrappings and other packaging materials. The 62Gpt suits especially well for fast running dispensers, in which the initial tack has to be built up extremely quickly as f.ex. when the labels are blown on the substrate.Once labelled the adhesive is highly waterproof.
This coated kraft liner has been designed for production of label sheets for copiers and laser printers. The reverse of the paper assures excellent processing characteristics, i.e. high friction combined with high abrasion resistance.
Processing
Excellent die-cutting characteristics on all customary machines.
HERMA KW (512) was designed for sheeting. It is less suitable for conversions where waste-stripping is involved.
Storage conditions
Storing at a temperature of 20 ± 5 °C, a relative humidity of 45 ± 5 % and a dark storage is recommended. Moisture, heat and direct sunlight have to be avoided.
The shelf life is two years from date of production.
Regulations concerning contact with food
The reverse side coating does not comply with the German BfR Recommendation XXXVI (direct contact with food).All ingredients of adhesive 62Gpt comply with recommendation BfR XIV or FDA 21 CFR 175.105 (Adhesives).The pressure-sensitive adhesive 62Gpt can be safely used for the back coating of labels for the labelling of foodstuffs for storage at room temperature and below. It may be used in direct contact with dry, moist and fatty foodstuffs that can be assigned a correction factor of at least 3 in accordance with Regulation (EU) No. 10/2011. Furthermore, the adhesive may be used for laminating various materials. In this case, cut edge contact with food is harmless as far as the above mentioned adhesive is concerned. It must be ensured that the relevant migration limits are complied with by the laminated packaging (Declaration of no objection valid until 10.10.2025).The paper complies with recommendation BfR XXXVI.
Produsent
Varenummer
3063123
Model
15260
Ean
4008705152600
Til produsentens hjemmeside
Ovenstående informasjon/spesifikasjoner er veiledende og kan uten varsel bli endret av produsenten. Det tas forbehold om trykkfeil og illustrerende bilder. Enkelte tekster kan være autogenerert eller maskinoversatt, så derfor kan det forekomme tekster som virker misvisende.