Varenummer: 3524845
Bosch HSS PointTeQ Drill Bit 4.1mm 10pcs
Bosch 2 608 577 209 bor bits Twist Betongbor 10 stykker
108,00 kr
86,40 kr eksl. mva
Rimeligste private frakt: 109,00 kr
Bestillingsvare, leveringstiden kan ikke opplyses.
HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to PointTeQ tip design
- Increased drilling rate generates less heat and wear
- PointTeQ tip design remains sharp and ensures continuous durability
- Low risk of breakage due to highly elastic body, black-oxide coated flute; DIN 338, Type N, 135-degree tip
There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is manufactured to have a highly elastic body. Its black-oxide coated flute provides fast chip removal. The HSS Twist Drill Bit PointTeQ is manufactured to DIN 338. The drill bit is Type N (flute angle) with a tip of 135 degrees.
It has a cylindrical shank system and is intended for use in drill stands and drill drivers.
- Increased drilling rate generates less heat and wear
- PointTeQ tip design remains sharp and ensures continuous durability
- Low risk of breakage due to highly elastic body, black-oxide coated flute; DIN 338, Type N, 135-degree tip
There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is manufactured to have a highly elastic body. Its black-oxide coated flute provides fast chip removal. The HSS Twist Drill Bit PointTeQ is manufactured to DIN 338. The drill bit is Type N (flute angle) with a tip of 135 degrees.
It has a cylindrical shank system and is intended for use in drill stands and drill drivers.
Produsent
Varenummer
3524845
Model
2608577209
Ean
3165140907187
Til produsentens hjemmeside
Kontakt produsenten
Korrekt bruk
Drill
Bortype
Twist Betongbor
Drill-bit diameter
4,1 mm
Lengde
75 mm
Egnet for materialer
Støpejern, Stål
Arbeidslengde
4,3 cm
Borfestediameter
4,1 mm
Bor-bit materiale
Høy-Hastighets Stål (HHS)
Nøkkelform
Sylindrisk Skaft
Produktfarge
Sølv
DIN overenstemmelse
338
Pakketype
Hengende boks
Antall borebiter (spisser)
10 stykker
Egenskaper
Korrekt bruk
Drill
Bortype
Twist Betongbor
Drill-bit diameter
4,1 mm
Lengde
75 mm
Egnet for materialer
Støpejern, Stål
Arbeidslengde
4,3 cm
Borfestediameter
4,1 mm
Bor-bit materiale
Høy-Hastighets Stål (HHS)
Nøkkelform
Sylindrisk Skaft
Produktfarge
Sølv
DIN overenstemmelse
338
Datainnpakking
Pakketype
Hengende boks
Emballasjeinnhold
Antall borebiter (spisser)
10 stykker
Ovenstående informasjon/spesifikasjoner er veiledende og kan uten varsel bli endret av produsenten. Det tas forbehold om trykkfeil og illustrerende bilder. Enkelte tekster kan være autogenerert eller maskinoversatt, så derfor kan det forekomme tekster som virker misvisende.